Re: [PATCH v7 4/4] Bluetooth: btqca: inject command complete event during fw download

From: Balakrishna Godavarthi
Date: Mon Dec 31 2018 - 01:04:55 EST


Hi Marcel,

On 2018-12-30 13:40, Marcel Holtmann wrote:
Hi Balakrishna,

Latest qualcomm chips are not sending an command complete event for
every firmware packet sent to chip. They only respond with a vendor
specific event for the last firmware packet. This optimization will
decrease the BT ON time. Due to this we are seeing a timeout error
message logs on the console during firmware download. Now we are
injecting a command complete event once we receive an vendor specific
event for the last RAM firmware packet.
Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
---
drivers/bluetooth/btqca.c | 39 ++++++++++++++++++++++++++++++++++++++-
drivers/bluetooth/btqca.h | 3 +++
2 files changed, 41 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..0b533f65f652 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -144,6 +144,7 @@ static void qca_tlv_check_data(struct rome_config *config,
* In case VSE is skipped, only the last segment is acked.
*/
config->dnld_mode = tlv_patch->download_mode;
+ config->dnld_type = config->dnld_mode;
BT_DBG("Total Length : %d bytes",
le32_to_cpu(tlv_patch->total_size));
@@ -264,6 +265,31 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
return err;
}
+static int qca_inject_cmd_complete_event(struct hci_dev *hdev)
+{
+ struct hci_event_hdr *hdr;
+ struct hci_ev_cmd_complete *evt;
+ struct sk_buff *skb;
+
+ skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ hdr = skb_put(skb, sizeof(*hdr));
+ hdr->evt = HCI_EV_CMD_COMPLETE;
+ hdr->plen = sizeof(*evt) + 1;
+
+ evt = skb_put(skb, sizeof(*evt));
+ evt->ncmd = 1;
+ evt->opcode = HCI_OP_NOP;
+
+ skb_put_u8(skb, QCA_HCI_CC_SUCCESS);
+
+ hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+
+ return hci_recv_frame(hdev, skb);
+}
+
static int qca_download_firmware(struct hci_dev *hdev,
struct rome_config *config)
{
@@ -297,11 +323,22 @@ static int qca_download_firmware(struct hci_dev *hdev,
ret = qca_tlv_send_segment(hdev, segsize, segment,
config->dnld_mode);
if (ret)
- break;
+ goto out;
segment += segsize;
}
+ /* Latest qualcomm chipsets are not sending a command complete event
+ * for every fw packet sent. They only respond with a vendor specific
+ * event for the last packet. This optimization in the chip will
+ * decrease the BT in initialization time. Here we will inject a command
+ * complete event to avoid a command timeout error message.
+ */
+ if ((config->dnld_type == ROME_SKIP_EVT_VSE_CC ||
+ config->dnld_type == ROME_SKIP_EVT_VSE))
+ return qca_inject_cmd_complete_event(hdev);
+
have you actually considered using __hci_cmd_send in that case. It is
allowed for vendor OGF to use that command. I see you actually do use
it and now I am failing to understand what this is for.
[Bala]: thanks for reviewing the change.

__hci_cmd_send() can be used only to send the command to the chip. it will not wait for the response for the command sent.

as you know that every vendor command sent to chip will respond with vendor specific event and command complete event.
but in our case chip will only respond with vendor specific event only. so we are injecting command complete event.

and __hci_cmd_sync_ev is also not working for you? However since you
are not waiting for the vendor event anyway and just injecting
cmd_complete, I wonder whatâs the difference in just using
__hci_cmd_send and not bothering to wait or inject at all. I am
failing to see where this injection makes a difference.

For me it is a big difference if we are injecting one event like in
the case of Intel compared to injecting one for every command. It will
show a wrong picture in btmon and that is a bad idea.

Regards

Marcel

[Bala]: here is the use case, when ever we download the fw packets i.e. RAM image, for every command sent(i.e. fw packet) from
the host chip will respond with an vendor specific event and command complete event.

the above is taking more time to setup the BT device. then we came up with solution where we enable flags in fw file (i.e. RAM image header)
whether to wait for event to be received or sent the total packets and wait for the events for the last packet.

So currently we are handling both the cases in the code. i.e wait for event for all packet or wait for an event for the last packet.

but in the second case i.e. wait for event for the last packet sent, we are only receiving an vendor specific event from chip which holds the status of fw download.

so as __hci_cmd_sync_ev() requires an command complete event. so we are injecting it after the vendor specific event received for the last packet.

This helps to overcome 0xfc00 timeout error logging on console.

--
Regards
Balakrishna.