Re: [PATCH 1/2] USB: storage: don't insert sane sense for SPC3+ when bad sense specified

From: Alan Stern
Date: Fri Dec 28 2018 - 11:01:07 EST


On Thu, 27 Dec 2018, Icenowy Zheng wrote:

> Currently the code will set US_FL_SANE_SENSE flag unconditionally if
> device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
> prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
> which claims SPC4, will show strange behavior with 96-byte sense
> (put the chip into a wrong state that cannot read/write anything).
>
> Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
> SPC4+ devices.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> drivers/usb/storage/scsiglue.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
> index fde2e71a6ade..699fe9557127 100644
> --- a/drivers/usb/storage/scsiglue.c
> +++ b/drivers/usb/storage/scsiglue.c
> @@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device *sdev)
> sdev->try_rc_10_first = 1;
>
> /* assume SPC3 or latter devices support sense size > 18 */
> - if (sdev->scsi_level > SCSI_SPC_2)
> + if (sdev->scsi_level > SCSI_SPC_2 &&
> + !(us->fflags & US_FL_BAD_SENSE))
> us->fflags |= US_FL_SANE_SENSE;

Please update the comment so that it matches the new code.

Alan Stern