Re: [PATCH v3 1/9] ASoC: sun4i-i2s: Adjust regmap settings

From: Chen-Yu Tsai
Date: Fri Dec 21 2018 - 11:44:24 EST


On Fri, Dec 21, 2018 at 11:21 PM <codekipper@xxxxxxxxx> wrote:
>
> From: Marcus Cooper <codekipper@xxxxxxxxx>
>
> Bypass the regmap cache when flushing the i2s FIFOs and modify the tables
> to reflect this.
>
> Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
> ---
> sound/soc/sunxi/sun4i-i2s.c | 29 +++++++++--------------------
> 1 file changed, 9 insertions(+), 20 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index d5ec1a20499d..64d073cb2aee 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -548,9 +548,11 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> static void sun4i_i2s_start_capture(struct sun4i_i2s *i2s)
> {
> /* Flush RX FIFO */
> + regcache_cache_bypass(i2s->regmap, true);
> regmap_update_bits(i2s->regmap, SUN4I_I2S_FIFO_CTRL_REG,
> SUN4I_I2S_FIFO_CTRL_FLUSH_RX,
> SUN4I_I2S_FIFO_CTRL_FLUSH_RX);
> + regcache_cache_bypass(i2s->regmap, false);

IIRC the flush cache bit is self-clearing. So you likely want to mark
this register as volatile. If it is marked as volatile, then all access
to that register bypasses the cache, so the regcache_cache_bypass calls
are unneeded.

However, looking at the code, the write would seem to be ignored if the
regmap is in the cache_only state. We only set this when the bus clock
is disabled. Under such a condition, bypassing the cache and forcing a
write would be unwise, as the system either drops the write, or stalls
altogether.

>
> /* Clear RX counter */
> regmap_write(i2s->regmap, SUN4I_I2S_RX_CNT_REG, 0);
> @@ -569,9 +571,11 @@ static void sun4i_i2s_start_capture(struct sun4i_i2s *i2s)
> static void sun4i_i2s_start_playback(struct sun4i_i2s *i2s)
> {
> /* Flush TX FIFO */
> + regcache_cache_bypass(i2s->regmap, true);
> regmap_update_bits(i2s->regmap, SUN4I_I2S_FIFO_CTRL_REG,
> SUN4I_I2S_FIFO_CTRL_FLUSH_TX,
> SUN4I_I2S_FIFO_CTRL_FLUSH_TX);
> + regcache_cache_bypass(i2s->regmap, false);
>
> /* Clear TX counter */
> regmap_write(i2s->regmap, SUN4I_I2S_TX_CNT_REG, 0);
> @@ -703,13 +707,7 @@ static const struct snd_soc_component_driver sun4i_i2s_component = {
>
> static bool sun4i_i2s_rd_reg(struct device *dev, unsigned int reg)
> {
> - switch (reg) {
> - case SUN4I_I2S_FIFO_TX_REG:
> - return false;
> -
> - default:
> - return true;
> - }
> + return true;

I don't understand why this is relevant. Do you need to read back from the TX
FIFO?

If so, just drop the call-back altogether. If no callback is provided and no
rd_table is provided either, it defaults to all registers under max_register
(if max_register < 0) are readable.

However this seems like it deserves to be a separate patch (where you explain
in the commit log why it's needed).

Regards
ChenYu

> }
>
> static bool sun4i_i2s_wr_reg(struct device *dev, unsigned int reg)
> @@ -728,6 +726,8 @@ static bool sun4i_i2s_volatile_reg(struct device *dev, unsigned int reg)
> {
> switch (reg) {
> case SUN4I_I2S_FIFO_RX_REG:
> + case SUN4I_I2S_FIFO_TX_REG:
> + case SUN4I_I2S_FIFO_STA_REG:
> case SUN4I_I2S_INT_STA_REG:
> case SUN4I_I2S_RX_CNT_REG:
> case SUN4I_I2S_TX_CNT_REG:
> @@ -738,23 +738,12 @@ static bool sun4i_i2s_volatile_reg(struct device *dev, unsigned int reg)
> }
> }
>
> -static bool sun8i_i2s_rd_reg(struct device *dev, unsigned int reg)
> -{
> - switch (reg) {
> - case SUN8I_I2S_FIFO_TX_REG:
> - return false;
> -
> - default:
> - return true;
> - }
> -}
> -
> static bool sun8i_i2s_volatile_reg(struct device *dev, unsigned int reg)
> {
> if (reg == SUN8I_I2S_INT_STA_REG)
> return true;
> if (reg == SUN8I_I2S_FIFO_TX_REG)
> - return false;
> + return true;
>
> return sun4i_i2s_volatile_reg(dev, reg);
> }
> @@ -809,7 +798,7 @@ static const struct regmap_config sun8i_i2s_regmap_config = {
> .reg_defaults = sun8i_i2s_reg_defaults,
> .num_reg_defaults = ARRAY_SIZE(sun8i_i2s_reg_defaults),
> .writeable_reg = sun4i_i2s_wr_reg,
> - .readable_reg = sun8i_i2s_rd_reg,
> + .readable_reg = sun4i_i2s_rd_reg,
> .volatile_reg = sun8i_i2s_volatile_reg,
> };
>
> --
> 2.20.1
>