[PATCH v8 01/10] dt-bindings: opp: Introduce qcom-opp bindings

From: Rajendra Nayak
Date: Fri Dec 21 2018 - 03:56:41 EST


On Qualcomm Technologies, Inc. platforms, an OPP node needs
to describe an additional level/corner value that is then communicated
to a remote microprocessor by the CPU, which then takes some
actions (like adjusting voltage values across various rails)
based on the value passed.

Describe these bindings in the qcom-opp bindings document.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/opp/qcom-opp.txt | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt

diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
new file mode 100644
index 000000000000..b3850a5ed59a
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt
@@ -0,0 +1,28 @@
+Qualcomm OPP bindings to descibe OPP nodes with corner/level values
+
+OPP tables for devices on Qualcomm platforms require an additional
+platform specific corner/level value to be specified.
+This value is passed on to the RPM (Resource Power Manager) by
+the CPU, which then takes the necessary actions to set a voltage
+rail to an appropriate voltage based on the value passed.
+
+The bindings are based on top of the operating-points-v2 bindings
+described in Documentation/devicetree/bindings/opp/opp.txt,
+with the exception that all of the properties are now optional,
+including the opp-hz property.
+
+Additional properties are described below.
+
+* OPP Table Node
+
+Required properties:
+- compatible: Allow OPPs to express their compatibility. It should be:
+ "operating-points-v2-qcom-level"
+
+* OPP Node
+
+Required properties:
+- qcom,level: On Qualcomm platforms an OPP node can describe a positive value
+representing a corner/level that's communicated with a remote microprocessor
+(usually called the RPM) which then translates it into a certain voltage on
+a voltage rail.
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation