[PATCH V4 2/4] mmc: cqhci: DMA Configuration prior to CQE

From: Sowjanya Komatineni
Date: Wed Dec 19 2018 - 18:42:43 EST


eMMC-5.1 JESD84-B51 Spec (Section 6.6.39.1), mentions "Prior to
enabling command queuing, the block size shall be set to 512 B.
Device may respond with an error to CMD46/CMD47 if block size
is not 512 B".

This patch fixes the sequence to follow exact as per the spec.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
drivers/mmc/host/cqhci.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/cqhci.c b/drivers/mmc/host/cqhci.c
index 159270e947cf..f701342e7212 100644
--- a/drivers/mmc/host/cqhci.c
+++ b/drivers/mmc/host/cqhci.c
@@ -248,6 +248,9 @@ static void __cqhci_enable(struct cqhci_host *cq_host)
cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
}

+ if (cq_host->ops->enable)
+ cq_host->ops->enable(mmc);
+
cqcfg &= ~(CQHCI_DCMD | CQHCI_TASK_DESC_SZ);

if (mmc->caps2 & MMC_CAP2_CQE_DCMD)
@@ -273,9 +276,6 @@ static void __cqhci_enable(struct cqhci_host *cq_host)

mmc->cqe_on = true;

- if (cq_host->ops->enable)
- cq_host->ops->enable(mmc);
-
/* Ensure all writes are done before interrupts are enabled */
wmb();

@@ -561,6 +561,7 @@ static int cqhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
int tag = cqhci_tag(mrq);
struct cqhci_host *cq_host = mmc->cqe_private;
unsigned long flags;
+ u32 cqcfg = 0;

if (!cq_host->enabled) {
pr_err("%s: cqhci: not enabled\n", mmc_hostname(mmc));
@@ -579,8 +580,19 @@ static int cqhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
pr_err("%s: cqhci: CQE failed to exit halt state\n",
mmc_hostname(mmc));
}
+ /* Configuration must not be changed while enabled */
+ cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
+ if (cqcfg & CQHCI_ENABLE) {
+ cqcfg &= ~CQHCI_ENABLE;
+ cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
+ }
+
if (cq_host->ops->enable)
cq_host->ops->enable(mmc);
+
+ cqcfg |= CQHCI_ENABLE;
+ cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
+
}

if (mrq->data) {
--
2.7.4