[PATCH RESEND v8 1/4] clk: meson: add one based divider support for sclk divider

From: Jianxin Pan
Date: Wed Dec 19 2018 - 06:41:03 EST


When CLK_DIVIDER_ONE_BASED flag is set, the sclk divider will be:
one based divider (div = val), and zero value gates the clock

Signed-off-by: Jianxin Pan <jianxin.pan@xxxxxxxxxxx>
---
drivers/clk/meson/Makefile | 3 ++-
drivers/clk/meson/clkc-audio.h | 8 ------
drivers/clk/meson/clkc.h | 10 ++++++-
drivers/clk/meson/sclk-div.c | 59 ++++++++++++++++++++++++++++--------------
4 files changed, 50 insertions(+), 30 deletions(-)

diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index a849aa8..acd8694 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,7 +4,8 @@

obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o
-obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o sclk-div.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC) += sclk-div.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o
obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h
index 0a7c157..286ff12 100644
--- a/drivers/clk/meson/clkc-audio.h
+++ b/drivers/clk/meson/clkc-audio.h
@@ -15,14 +15,6 @@ struct meson_clk_triphase_data {
struct parm ph2;
};

-struct meson_sclk_div_data {
- struct parm div;
- struct parm hi;
- unsigned int cached_div;
- struct clk_duty cached_duty;
-};
-
extern const struct clk_ops meson_clk_triphase_ops;
-extern const struct clk_ops meson_sclk_div_ops;

#endif /* __MESON_CLKC_AUDIO_H */
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 6183b22..00b3320 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -27,6 +27,14 @@ struct parm {
u8 width;
};

+struct meson_sclk_div_data {
+ struct parm div;
+ struct parm hi;
+ unsigned int cached_div;
+ struct clk_duty cached_duty;
+ u8 flags;
+};
+
static inline unsigned int meson_parm_read(struct regmap *map, struct parm *p)
{
unsigned int val;
@@ -118,10 +126,10 @@ struct clk_regmap _name = { \
extern const struct clk_ops meson_clk_mpll_ops;
extern const struct clk_ops meson_clk_phase_ops;
extern const struct clk_ops meson_vid_pll_div_ro_ops;
+extern const struct clk_ops meson_sclk_div_ops;

struct clk_hw *meson_clk_hw_register_input(struct device *dev,
const char *of_name,
const char *clk_name,
unsigned long flags);
-
#endif /* __CLKC_H */
diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c
index bc64019..a6c425b 100644
--- a/drivers/clk/meson/sclk-div.c
+++ b/drivers/clk/meson/sclk-div.c
@@ -4,42 +4,60 @@
* Author: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
*
* Sample clock generator divider:
- * This HW divider gates with value 0 but is otherwise a zero based divider:
+ * This HW divider gates with value 0
*
* val >= 1
- * divider = val + 1
+ * divider = val + 1 if ONE_BASED is not set, otherwise divider = val.
*
* The duty cycle may also be set for the LR clock variant. The duty cycle
* ratio is:
*
* hi = [0 - val]
- * duty_cycle = (1 + hi) / (1 + val)
+ * duty_cycle = (1 + hi) / (1 + val) if ONE_BASED is not set, otherwise:
+ * duty_cycle = hi / (1 + val)
*/

-#include "clkc-audio.h"
+#include "clkc.h"

-static inline struct meson_sclk_div_data *
-meson_sclk_div_data(struct clk_regmap *clk)
+static inline int get_reg(int val, unsigned char flag)
{
- return (struct meson_sclk_div_data *)clk->data;
+ WARN_ON(val < 1);
+ if ((flag & CLK_DIVIDER_ONE_BASED) || !val)
+ return val;
+ else
+ return val - 1;
+}
+
+static inline int get_value(int reg, unsigned char flag)
+{
+ if (flag & CLK_DIVIDER_ONE_BASED)
+ return reg;
+ else
+ return reg + 1;
}

-static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
+static inline struct meson_sclk_div_data *
+meson_sclk_div_data(struct clk_regmap *clk)
{
- return (1 << sclk->div.width) - 1;
+ return (struct meson_sclk_div_data *)clk->data;
}

static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
{
- return sclk_div_maxval(sclk) + 1;
+ unsigned int reg = clk_div_mask(sclk->div.width);
+
+ return get_value(reg, sclk->flags);
}

static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
unsigned long prate, int maxdiv)
{
int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+ int mindiv = get_value(1, sclk->flags);

- return clamp(div, 2, maxdiv);
+ return clamp(div, mindiv, maxdiv);
}

static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
@@ -47,7 +65,7 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
struct meson_sclk_div_data *sclk)
{
struct clk_hw *parent = clk_hw_get_parent(hw);
- int bestdiv = 0, i;
+ int bestdiv = 0, i, mindiv;
unsigned long maxdiv, now, parent_now;
unsigned long best = 0, best_parent = 0;

@@ -64,8 +82,9 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
* unsigned long in rate * i below
*/
maxdiv = min(ULONG_MAX / rate, maxdiv);
+ mindiv = get_value(1, sclk->flags);

- for (i = 2; i <= maxdiv; i++) {
+ for (i = mindiv; i <= maxdiv; i++) {
/*
* It's the most ideal case if the requested rate can be
* divided from parent clock without needing to change
@@ -111,10 +130,7 @@ static void sclk_apply_ratio(struct clk_regmap *clk,
sclk->cached_duty.num,
sclk->cached_duty.den);

- if (hi)
- hi -= 1;
-
- meson_parm_write(clk->map, &sclk->hi, hi);
+ meson_parm_write(clk->map, &sclk->hi, get_reg(hi, sclk->flags));
}

static int sclk_div_set_duty_cycle(struct clk_hw *hw,
@@ -145,7 +161,7 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
}

hi = meson_parm_read(clk->map, &sclk->hi);
- duty->num = hi + 1;
+ duty->num = get_value(hi, sclk->flags);
duty->den = sclk->cached_div;
return 0;
}
@@ -153,10 +169,13 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
static void sclk_apply_divider(struct clk_regmap *clk,
struct meson_sclk_div_data *sclk)
{
+ unsigned int div;
+
if (MESON_PARM_APPLICABLE(&sclk->hi))
sclk_apply_ratio(clk, sclk);

- meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
+ div = get_reg(sclk->cached_div, sclk->flags);
+ meson_parm_write(clk->map, &sclk->div, div);
}

static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -224,7 +243,7 @@ static void sclk_div_init(struct clk_hw *hw)
if (!val)
sclk->cached_div = sclk_div_maxdiv(sclk);
else
- sclk->cached_div = val + 1;
+ sclk->cached_div = get_value(val, sclk->flags);

sclk_div_get_duty_cycle(hw, &sclk->cached_duty);
}
--
1.9.1