Re: [PATCH v2 1/2] dt-bindings: gpio: Add bindings for Cadence GPIO

From: Rob Herring
Date: Tue Dec 18 2018 - 12:33:32 EST


On Mon, Dec 17, 2018 at 03:36:51PM +0000, Jan Kotas wrote:
> This patch adds a DT binding documentation for
> Cadence GPIO controller.
>
> Signed-off-by: Jan Kotas <jank@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/gpio/cdns,gpio.txt | 44 ++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/cdns,gpio.txt
>
> diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
> new file mode 100644
> index 000000000..c87a47827
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
> @@ -0,0 +1,44 @@
> +Cadence GPIO controller bindings
> +
> +Required properties:
> +- compatible: should be "cdns,gpio-r1p02".
> +- reg: the register base address and size.
> +- #gpio-cells: should be 2.
> + * first cell is the GPIO number.
> + * second cell specifies the GPIO flags, as defined in
> + <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
> + and GPIO_ACTIVE_LOW flags are supported.
> +- gpio-controller: marks the device as a GPIO controller.
> +- clocks: should contain one entry referencing the peripheral clock driving
> + the GPIO controller.
> +
> +Optional properties:
> +- ngpios: integer number of gpio lines supported by this controller, up to 32.
> +- interrupt-parent: phandle of the parent interrupt controller.

Don't document interrupt-parent as it is implied and could be in a
parent. Otherwise,

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

Rob