[PATCH v2 1/2] dt-bindings: irq: add binding for Freescale IRQSTEER multiplexer

From: Lucas Stach
Date: Fri Dec 14 2018 - 05:22:54 EST


This adds the DT binding for the Freescale IRQSTEER interrupt
multiplexer found in the i.MX8 familiy SoCs.

Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
.../interrupt-controller/fsl,irqsteer.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
new file mode 100644
index 000000000000..fd4aaa379993
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
@@ -0,0 +1,34 @@
+Freescale IRQSTEER Interrupt multiplexer
+
+Required properties:
+
+- compatible: should be:
+ - "fsl,imx8m-irqsteer"
+ - "fsl,imx-irqsteer"
+- reg: Physical base address and size of registers.
+- interrupts: Should contain the parent interrupt line used to multiplex the
+ input interrupts.
+- clocks: Should contain one clock for entry in clock-names
+ see Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names:
+ - "ipg": main logic clock
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value must be 2.
+- fsl,channel: The output channel that all input IRQs should be steered into.
+- fsl,irq-groups: Number of IRQ groups managed by this controller instance.
+ Each group manages 64 input interrupts.
+
+Example:
+
+ interrupt-controller@32e2d000 {
+ compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x32e2d000 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+ clock-names = "ipg";
+ fsl,channel = <1>;
+ fsl,irq-groups = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
--
2.19.1