Re: [PATCH] nvme: default to 0 poll queues

From: Jens Axboe
Date: Sun Dec 09 2018 - 00:39:49 EST


On 12/8/18 5:49 PM, Guenter Roeck wrote:
> Hi,
>
> On Mon, Nov 19, 2018 at 08:18:24AM -0700, Jens Axboe wrote:
>> We need a better way of configuring this, and given that polling is
>> (still) a bit niche, let's default to using 0 poll queues. That way
>> we'll have the same read/write/poll behavior as 4.20, and users that
>> want to test/use polling are required to do manual configuration of the
>> number of poll queues.
>>
>> Reviewed-by: Christoph Hellwig <hch@xxxxxx>
>> Signed-off-by: Jens Axboe <axboe@xxxxxxxxx>
>> ---
>
> This patch results in a boot stall when booting parisc (hppa) images
> from nvme in qemu.
>
> ...
> Fusion MPT SAS Host driver 3.04.20
> rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> rcu: (detected by 0, t=5252 jiffies, g=141, q=22)
> rcu: All QSes seen, last rcu_sched kthread activity 5252 (-66742--71994), jiffies_till_next_fqs=1, root ->qsmask 0x0
> kworker/u8:3 R running task 0 85 2 0x00000004
> Workqueue: nvme-reset-wq nvme_reset_work
> Backtrace:
> [<10190d20>] show_stack+0x28/0x38
> [<101dd1e0>] sched_show_task.part.3+0xc4/0x144
> [<101dd290>] sched_show_task+0x30/0x38
> [<10221e18>] rcu_check_callbacks+0x760/0x7a4
>
> rcu: rcu_sched kthread starved for 5252 jiffies! g141 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
> rcu: RCU grace-period kthread stack dump:
> rcu_sched R running task 0 10 2 0x00000000
> Backtrace:
> [<10995b1c>] __schedule+0x214/0x648
> [<10995f94>] schedule+0x44/0xa8
> [<1099a7c4>] schedule_timeout+0x114/0x1a0
> [<10220e70>] rcu_gp_kthread+0x744/0x968
> [<101d5438>] kthread+0x154/0x15c
> [<1019501c>] ret_from_kernel_thread+0x1c/0x24
>
> [ continued ]
>
> This is only seen in SMP configurations; non-SMP configurations are ok.
> Reverting the patch fixes the problem. v4.20-rcX and earlier kernels
> also boot without problems.
>
> For reference, here is the qemu command line. This is with qemu 3.0.
>
> qemu-system-hppa -kernel vmlinux -no-reboot \
> -snapshot \
> -device nvme,serial=foo,drive=d0 \
> -drive file=rootfs.ext2,if=none,format=raw,id=d0 \
> -append 'root=/dev/nvme0n1 rw rootwait panic=-1 console=ttyS0,115200 ' \
> -nographic -monitor null
>
> Please let me know if you need additional information.

Hmm, I think the queue reduction case has a logic error. Actually there
are two bugs:

1) Ensure we don't keep overwriting the queue count we ask for
2) Don't include poll_queues in the vectors we need

Untested... And not super pretty. But does this work for you?


diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 7732c4979a4e..fe00e19493ae 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2083,7 +2083,7 @@ static void nvme_calc_io_queues(struct nvme_dev *dev, unsigned int nr_io_queues)
}
}

-static int nvme_setup_irqs(struct nvme_dev *dev, int nr_io_queues)
+static int nvme_setup_irqs(struct nvme_dev *dev, int irq_queues, int pqueues)
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
int irq_sets[2];
@@ -2100,7 +2100,8 @@ static int nvme_setup_irqs(struct nvme_dev *dev, int nr_io_queues)
* IRQ vector needs.
*/
do {
- nvme_calc_io_queues(dev, nr_io_queues);
+ nvme_calc_io_queues(dev, irq_queues + pqueues);
+ pqueues = dev->io_queues[HCTX_TYPE_POLL];
irq_sets[0] = dev->io_queues[HCTX_TYPE_DEFAULT];
irq_sets[1] = dev->io_queues[HCTX_TYPE_READ];
if (!irq_sets[1])
@@ -2111,11 +2112,11 @@ static int nvme_setup_irqs(struct nvme_dev *dev, int nr_io_queues)
* 1 + 1 queues, just ask for a single vector. We'll share
* that between the single IO queue and the admin queue.
*/
- if (!(result < 0 && nr_io_queues == 1))
- nr_io_queues = irq_sets[0] + irq_sets[1] + 1;
+ if (!(result < 0 || irq_queues == 1))
+ irq_queues = irq_sets[0] + irq_sets[1] + 1;

- result = pci_alloc_irq_vectors_affinity(pdev, nr_io_queues,
- nr_io_queues,
+ result = pci_alloc_irq_vectors_affinity(pdev, irq_queues,
+ irq_queues,
PCI_IRQ_ALL_TYPES | PCI_IRQ_AFFINITY, &affd);

/*
@@ -2125,12 +2126,12 @@ static int nvme_setup_irqs(struct nvme_dev *dev, int nr_io_queues)
* likely does not. Back down to ask for just one vector.
*/
if (result == -ENOSPC) {
- nr_io_queues--;
- if (!nr_io_queues)
+ irq_queues--;
+ if (!irq_queues)
return result;
continue;
} else if (result == -EINVAL) {
- nr_io_queues = 1;
+ irq_queues = 1;
continue;
} else if (result <= 0)
return -EIO;
@@ -2144,7 +2145,7 @@ static int nvme_setup_io_queues(struct nvme_dev *dev)
{
struct nvme_queue *adminq = &dev->queues[0];
struct pci_dev *pdev = to_pci_dev(dev->dev);
- int result, nr_io_queues;
+ int result, want_irqs, nr_io_queues, pqueues;
unsigned long size;

nr_io_queues = max_io_queues();
@@ -2185,7 +2186,20 @@ static int nvme_setup_io_queues(struct nvme_dev *dev)
*/
pci_free_irq_vectors(pdev);

- result = nvme_setup_irqs(dev, nr_io_queues);
+ /*
+ * If we don't get the number of IO queues we asked for, see if we
+ * need to adjust the number of poll queues down
+ */
+ pqueues = poll_queues;
+ if (!pqueues)
+ want_irqs = nr_io_queues;
+ else if (pqueues >= nr_io_queues) {
+ want_irqs = 1;
+ pqueues = nr_io_queues - 1;
+ } else
+ want_irqs = nr_io_queues - pqueues;
+
+ result = nvme_setup_irqs(dev, want_irqs, pqueues);
if (result <= 0)
return -EIO;


--
Jens Axboe