[PATCH 12/15 v4] regulator: da9211: Hand over GPIO to regulator core

From: Linus Walleij
Date: Thu Dec 06 2018 - 07:44:57 EST


The GPIO descriptors used by the DA9211 driver are retrieved
during probe() and it is really helpful to have those under
devres management because of all the errorpaths in the
intialization.

Using the new dev_gpiod_unhinge() call we can remove the
devres management of the descriptor right before handing
it over to the regulators core.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v3->v4:
- Resending.
ChangeLog v2->v3:
- Resending.
ChangeLog v1->v2:
- New patch handling this drivers GPIO descriptors properly.
---
drivers/regulator/da9211-regulator.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index 8f68c7a05d27..109ee12d4362 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -389,6 +389,12 @@ static int da9211_regulator_init(struct da9211 *chip)
else
config.ena_gpiod = NULL;

+ /*
+ * Hand the GPIO descriptor management over to the regulator
+ * core, remove it from GPIO devres management.
+ */
+ if (config.ena_gpiod)
+ devm_gpiod_unhinge(chip->dev, config.ena_gpiod);
chip->rdev[i] = devm_regulator_register(chip->dev,
&da9211_regulators[i], &config);
if (IS_ERR(chip->rdev[i])) {
--
2.19.2