[PATCH v10 1/2] perf, uncore: Adding documentation for ThunderX2 pmu uncore driver

From: Kulkarni, Ganapatrao
Date: Thu Dec 06 2018 - 01:46:33 EST


The SoC has PMU support in its L3 cache controller (L3C) and in the
DDR4 Memory Controller (DMC).

Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@xxxxxxxxxx>
---
Documentation/perf/thunderx2-pmu.txt | 93 ++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
create mode 100644 Documentation/perf/thunderx2-pmu.txt

diff --git a/Documentation/perf/thunderx2-pmu.txt b/Documentation/perf/thunderx2-pmu.txt
new file mode 100644
index 000000000000..6ec37f0e6d2c
--- /dev/null
+++ b/Documentation/perf/thunderx2-pmu.txt
@@ -0,0 +1,93 @@
+
+Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
+==========================================================================
+
+ThunderX2 SoC PMU consists of independent system wide per Socket PMUs, such
+as Level 3 Cache(L3C) and DDR4 Memory Controller(DMC).
+
+The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles. Events
+are counted for the default channel(i.e channel 0) and prorated to total number of
+channels/tiles.
+
+DMC and L3C support up to 4 counters. Counters are independently programmable
+and can be started and stopped individually. Each counter can be set to
+a different event. Counters are 32 bit and do not support overflow interrupt;
+they are read every 2 seconds.
+
+PMU UNCORE (perf) driver:
+
+The thunderx2_pmu driver registers per socket perf PMUs for DMC and L3C devices.
+Each PMU can be used to count up to 4 events simultaneously. PMUs provide
+description of its available events and configuration options
+in sysfs, see /sys/devices/uncore_<l3c_S/dmc_S/>; S is the socket id.
+
+The driver does not support sampling, therefore "perf record" will
+not work. Per-task perf sessions are not supported.
+
+Examples:
+
+perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
+
+perf stat -a -e \
+uncore_dmc_0/cnt_cycles/,\
+uncore_dmc_0/data_transfers/,\
+uncore_dmc_0/read_txns/,\
+uncore_dmc_0/write_txns/ sleep 1
+
+perf stat -a -e \
+uncore_l3c_0/read_request/,\
+uncore_l3c_0/read_hit/,\
+uncore_l3c_0/inv_request/,\
+uncore_l3c_0/inv_hit/ sleep 1
+
+
+L3C events:
+============
+
+read_request:
+ Number of Read requests received by the L3 Cache.
+ This includes Read as well as Read Exclusives.
+
+read_hit:
+ Number of Read requests received by the L3 cache that were hit
+ in the L3 (Data provided form the L3)
+
+writeback_request:
+ Number of Write Backs received by the L3 Cache. These are basically
+ the L2 Evicts and writes from the PCIe Write Cache.
+
+inv_nwrite_request:
+ Number of Invalidate and Write requests received by the L3 Cache.
+ Also Writes from IO that did not go through the PCIe Write Cache.
+
+inv_nwrite_hit
+ Number of Invalidate and Write requests received by the L3 Cache
+ that were a hit in the L3 Cache.
+
+inv_request:
+ Number of Invalidate requests received by the L3 Cache.
+
+inv_hit:
+ Number of Invalidate requests received by the L3 Cache that were a
+ hit in the L3 Cache.
+
+evict_request:
+ Number of Evicts that the L3 cache generated.
+
+NOTE:
+1. Granularity of all these event counter values are cache line length(64 bytes)
+2. L3C cache Hit Ratio = (read_hit + inv_nwrite_hit + inv_hit) / (read_request + inv_nwrite_request + inv_request)
+
+DMC events:
+============
+cnt_cycles:
+ Count cycles (Clocks at the DMC clock rate)
+
+write_txns:
+ Number of 64 Bytes write transactions received by the DMC(s)
+
+read_txns:
+ Number of 64 Bytes Read transactions received by the DMC(s)
+
+data_transfers:
+ Number of 64 Bytes data transferred to or from DRAM.
--
2.18.0