RE: [PATCH V6 0/9] clk: add imx7ulp clk support

[Stephen Boyd]

Quoting Aisheng DONG (2018-12-03 17:29:29)
> > -----Original Message-----
> > From: Stephen Boyd [mailto:sboyd@xxxxxxxxxx]
> > Sent: Tuesday, December 4, 2018 3:32 AM
> > To: Aisheng DONG <aisheng.dong@xxxxxxx>; linux-clk@xxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > mturquette@xxxxxxxxxxxx; shawnguo@xxxxxxxxxx; Anson Huang
> > <anson.huang@xxxxxxx>; Jacky Bai <ping.bai@xxxxxxx>; dl-linux-imx
> > <linux-imx@xxxxxxx>; Aisheng DONG <aisheng.dong@xxxxxxx>
> > Subject: Re: [PATCH V6 0/9] clk: add imx7ulp clk support
> > 
> > Quoting A.s. Dong (2018-11-14 05:01:31)
> > > This patch series intends to add imx7ulp clk support.
> > >
> > > i.MX7ULP Clock functions are under joint control of the System Clock
> > > Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and
> > > Core Mode Controller (CMC)1 blocks
> > >
> > > The clocking scheme provides clear separation between M4 domain and A7
> > > domain. Except for a few clock sources shared between two domains,
> > > such as the System Oscillator clock, the Slow IRC (SIRC), and and the
> > > Fast IRC clock (FIRCLK), clock sources and clock management are
> > > separated and contained within each domain.
> > >
> > > M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
> > > A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
> > >
> > > Note: this series only adds A7 clock domain support as M4 clock domain
> > > will be handled by M4 seperately.
> > >
> > 
> > I got:
> > 
> > drivers/clk/imx/clk-pllv4.c:152:15: warning: symbol 'imx_clk_pllv4' was not
> > declared. Should it be static?
> > drivers/clk/imx/clk-pfdv2.c:166:15: warning: symbol 'imx_clk_pfdv2' was not
> > declared. Should it be static?
> > drivers/clk/imx/clk-divider-gate.c:174:15: warning: symbol
> > 'imx_clk_divider_gate' was not declared. Should it be static?
> > drivers/clk/imx/clk-composite-7ulp.c:22:15: warning: symbol
> > 'imx7ulp_clk_composite' was not declared. Should it be static?
> > 
> > which I can fix easily by throwing in clk.h into each file.
> 
> Thanks, I will double check it when I back to office.
> 

No worries, I fixed it up and merged to clk-next.