Re: [PATCH] USB: quirks: add NO_LPM quirk for Logitech Rally Camera

[Greg Kroah-Hartman]

On Thu, Nov 29, 2018 at 07:59:09AM -0500, Kyle Williams wrote:
> Description: Some USB device / host controller combinations seem to have
> problems with Link Power management. In particular it is described that
> the combination of a Logitech Rally and Atrus device causes
> 'not enough bandwidth for new device state'error
> 
> This patch creates quirk entries for the Logitech Rally Camera
> indicating LPM should remain disabled for the device.
> 
> Signed-off-by: Kyle Williams <kdgwill@xxxxxxxxxxxx>
> Reviewed-on: https://chromium-review.googlesource.com/1297535
> Commit-Ready: Kyle Williams <kdgwill@xxxxxxxxxxxx>
> Tested-by: Kyle Williams <kdgwill@xxxxxxxxxxxx>
> Reviewed-by: Julius Werner <jwerner@xxxxxxxxxxxx>
> ---
>  drivers/usb/core/quirks.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
> index 2deac3a55957..49c44d89a394 100644
> --- a/drivers/usb/core/quirks.c
> +++ b/drivers/usb/core/quirks.c
> @@ -224,6 +224,11 @@ static const struct usb_device_id usb_quirk_list[] = {
>   /* Logitech Logitech Screen Share */
>   { USB_DEVICE(0x046d, 0x086c), .driver_info = USB_QUIRK_NO_LPM },
> 
> + /* Logitech Rally Camera */
> + { USB_DEVICE(0x046d, 0x0881), .driver_info = USB_QUIRK_NO_LPM },
> + { USB_DEVICE(0x046d, 0x0888), .driver_info = USB_QUIRK_NO_LPM },
> + { USB_DEVICE(0x046d, 0x0889), .driver_info = USB_QUIRK_NO_LPM },
> +
>   /* Logitech Quickcam Fusion */
>   { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
> 

This patch had all tabs stripped out of it, and was sent in html :(