[PATCH V2] ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus

[Anson Huang]

Add egalax touch screen support on i2c2 bus, it is connected
to LVDS0, while the existing one on i2c3 bus is connected to
LVDS1.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6e46a19..d7389b5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -272,6 +272,16 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+	};
+
 	ov5640: camera@3c {
 		compatible = "ovti,ov5640";
 		pinctrl-names = "default";
@@ -498,6 +508,12 @@
 			>;
 		};
 
+		pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			>;
+		};
+
 		pinctrl_i2c3: i2c3grp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-- 
2.7.4