[PATCH v6 10/10] clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock

[Matti Vaittinen]

ROHM bd71837 and bd71847 contain 32768Hz clock gate. Support the clock
using generic clock framework. Note, only bd71837 is tested but bd71847
should be identical what comes to clk parts.

Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
---
 drivers/clk/Kconfig       |   7 +++
 drivers/clk/Makefile      |   1 +
 drivers/clk/clk-bd718x7.c | 131 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 139 insertions(+)
 create mode 100644 drivers/clk/clk-bd718x7.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 81cdb4eaca07..2dc12bf75b1b 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -283,6 +283,13 @@ config COMMON_CLK_STM32H7
 	---help---
 	  Support for stm32h7 SoC family clocks
 
+config COMMON_CLK_BD718XX
+	tristate "Clock driver for ROHM BD718x7 PMIC"
+	depends on MFD_ROHM_BD718XX
+	help
+	  This driver supports ROHM BD71837 and ROHM BD71847
+	  PMICs clock gates.
+
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 72be7a38cff1..a47430b387db 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -21,6 +21,7 @@ endif
 obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
 obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
+obj-$(CONFIG_COMMON_CLK_BD718XX)	+= clk-bd718x7.o
 obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
diff --git a/drivers/clk/clk-bd718x7.c b/drivers/clk/clk-bd718x7.c
new file mode 100644
index 000000000000..d486859526ed
--- /dev/null
+++ b/drivers/clk/clk-bd718x7.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 ROHM Semiconductors
+// bd71837.c  -- ROHM BD71837MWV clock driver
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mfd/rohm-bd718x7.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/regmap.h>
+
+struct bd718xx_clk {
+	struct clk_hw hw;
+	u8 reg;
+	u8 mask;
+	struct platform_device *pdev;
+	struct bd718xx *mfd;
+};
+
+static int bd71837_clk_set(struct clk_hw *hw, int status)
+{
+	struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
+
+	return regmap_update_bits(c->mfd->regmap, c->reg, c->mask, status);
+}
+
+static void bd71837_clk_disable(struct clk_hw *hw)
+{
+	int rv;
+	struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
+
+	rv = bd71837_clk_set(hw, 0);
+	if (rv)
+		dev_dbg(&c->pdev->dev, "Failed to disable 32K clk (%d)\n", rv);
+}
+
+static int bd71837_clk_enable(struct clk_hw *hw)
+{
+	return bd71837_clk_set(hw, 1);
+}
+
+static int bd71837_clk_is_enabled(struct clk_hw *hw)
+{
+	int enabled;
+	int rval;
+	struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
+
+	rval = regmap_read(c->mfd->regmap, c->reg, &enabled);
+
+	if (rval)
+		return rval;
+
+	return enabled & c->mask;
+}
+
+static const struct clk_ops bd71837_clk_ops = {
+	.prepare = &bd71837_clk_enable,
+	.unprepare = &bd71837_clk_disable,
+	.is_prepared = &bd71837_clk_is_enabled,
+};
+
+static int bd71837_clk_probe(struct platform_device *pdev)
+{
+	struct bd718xx_clk *c;
+	int rval = -ENOMEM;
+	const char *parent_clk;
+	struct device *parent = pdev->dev.parent;
+	struct bd718xx *mfd = dev_get_drvdata(parent);
+	struct clk_init_data init = {
+		.name = "bd718xx-32k-out",
+		.ops = &bd71837_clk_ops,
+	};
+
+	c = devm_kzalloc(&pdev->dev, sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return -ENOMEM;
+
+	init.num_parents = 1;
+	parent_clk = of_clk_get_parent_name(parent->of_node, 0);
+
+	init.parent_names = &parent_clk;
+	if (!parent_clk) {
+		dev_err(&pdev->dev, "No parent clk found\n");
+		return -EINVAL;
+	}
+
+	c->reg = BD718XX_REG_OUT32K;
+	c->mask = BD718XX_OUT32K_EN;
+	c->mfd = mfd;
+	c->pdev = pdev;
+	c->hw.init = &init;
+
+	of_property_read_string_index(parent->of_node,
+				      "clock-output-names", 0, &init.name);
+
+	rval = devm_clk_hw_register(&pdev->dev, &c->hw);
+	if (!rval) {
+		rval = devm_clk_hw_register_clkdev(&pdev->dev,
+						   &c->hw, init.name, NULL);
+		if (rval)
+			dev_warn(&pdev->dev, "Failed to register clkdev\n");
+		if (parent->of_node) {
+			rval = devm_of_clk_add_hw_provider(&pdev->dev,
+					     of_clk_hw_simple_get, &c->hw);
+			if (rval)
+				dev_err(&pdev->dev,
+					"adding clk provider failed\n");
+		}
+	} else {
+		dev_err(&pdev->dev, "failed to register 32K clk");
+	}
+
+	return rval;
+}
+
+static struct platform_driver bd71837_clk = {
+	.driver = {
+		.name = "bd718xx-clk",
+	},
+	.probe = bd71837_clk_probe,
+};
+
+module_platform_driver(bd71837_clk);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("BD71837 chip clk driver");
+MODULE_LICENSE("GPL");
-- 
2.14.3