Re: [PATCH v6 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver

[Lorenzo Pieralisi]

On Thu, Nov 22, 2018 at 04:53:54PM +0800, Hanjie Lin wrote:

[...]

> +static int meson_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
> +				  u32 *val)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +
> +	/*
> +	 * there is a bug of MESON AXG pcie controller that software can not
> +	 * programe PCI_CLASS_DEVICE register, so we must return a fake right
> +	 * value to ensure driver could probe successfully.
> +	 */
> +	if (where == PCI_CLASS_REVISION) {
> +		*val = readl(pci->dbi_base + PCI_CLASS_REVISION);
> +		/* keep revision id */
> +		*val &= PCI_CLASS_REVISION_MASK;
> +		*val |= PCI_CLASS_BRIDGE_PCI << 16;
> +		return PCIBIOS_SUCCESSFUL;
> +	}

As I said before, this looks broken. If this code (or other drivers with
the same broken assumptions, eg dwc/pcie-qcom.c) carries out a, say,
byte sized config access of eg PCI_CLASS_DEVICE you will get junk out of
it according to your comment above.

I would like to pick Bjorn's brain on this to see what we can really do
to fix this (and other) drivers.

Thanks,
Lorenzo

> +	return dw_pcie_read(pci->dbi_base + where, size, val);
> +}
> +
> +static int meson_pcie_wr_own_conf(struct pcie_port *pp, int where,
> +				  int size, u32 val)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +
> +	return dw_pcie_write(pci->dbi_base + where, size, val);
> +}
> +
> +static int meson_pcie_link_up(struct dw_pcie *pci)
> +{
> +	struct meson_pcie *mp = to_meson_pcie(pci);
> +	struct device *dev = pci->dev;
> +	u32 smlh_up = 0;
> +	u32 ltssm_up = 0;
> +	u32 rdlh_up = 0;
> +	u32 speed_okay = 0;
> +	u32 cnt = 0;
> +	u32 state12, state17;
> +
> +	while (smlh_up == 0 || rdlh_up == 0 || ltssm_up == 0 ||
> +	       speed_okay == 0) {
> +		udelay(20);
> +
> +		state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12);
> +		state17 = meson_cfg_readl(mp, PCIE_CFG_STATUS17);
> +		smlh_up = IS_SMLH_LINK_UP(state12);
> +		rdlh_up = IS_RDLH_LINK_UP(state12);
> +		ltssm_up = IS_LTSSM_UP(state12);
> +
> +		if (PM_CURRENT_STATE(state17) < PCIE_GEN3)
> +			speed_okay = 1;
> +
> +		if (smlh_up)
> +			dev_dbg(dev, "smlh_link_up is on\n");
> +		if (rdlh_up)
> +			dev_dbg(dev, "rdlh_link_up is on\n");
> +		if (ltssm_up)
> +			dev_dbg(dev, "ltssm_up is on\n");
> +		if (speed_okay)
> +			dev_dbg(dev, "speed_okay\n");
> +
> +		cnt++;
> +
> +		if (cnt >= WAIT_LINKUP_TIMEOUT) {
> +			dev_err(dev, "Error: Wait linkup timeout.\n");
> +			return 0;
> +		}
> +	}
> +
> +	return 1;
> +}
> +
> +static int meson_pcie_host_init(struct pcie_port *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct meson_pcie *mp = to_meson_pcie(pci);
> +	int ret;
> +
> +	ret = meson_pcie_establish_link(mp);
> +	if (ret)
> +		return ret;
> +
> +	meson_pcie_enable_interrupts(mp);
> +
> +	return 0;
> +}
> +
> +static const struct dw_pcie_host_ops meson_pcie_host_ops = {
> +	.rd_own_conf = meson_pcie_rd_own_conf,
> +	.wr_own_conf = meson_pcie_wr_own_conf,
> +	.host_init = meson_pcie_host_init,
> +};
> +
> +static int meson_add_pcie_port(struct meson_pcie *mp,
> +			       struct platform_device *pdev)
> +{
> +	struct dw_pcie *pci = &mp->pci;
> +	struct pcie_port *pp = &pci->pp;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		pp->msi_irq = platform_get_irq(pdev, 0);
> +		if (pp->msi_irq < 0) {
> +			dev_err(dev, "failed to get msi irq\n");
> +			return pp->msi_irq;
> +		}
> +	}
> +
> +	pp->ops = &meson_pcie_host_ops;
> +	pci->dbi_base = mp->mem_res.elbi_base;
> +
> +	ret = dw_pcie_host_init(pp);
> +	if (ret) {
> +		dev_err(dev, "failed to initialize host\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct dw_pcie_ops dw_pcie_ops = {
> +	.link_up = meson_pcie_link_up,
> +};
> +
> +static int meson_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct dw_pcie *pci;
> +	struct meson_pcie *mp;
> +	int ret;
> +
> +	mp = devm_kzalloc(dev, sizeof(*mp), GFP_KERNEL);
> +	if (!mp)
> +		return -ENOMEM;
> +
> +	pci = &mp->pci;
> +	pci->dev = dev;
> +	pci->ops = &dw_pcie_ops;
> +
> +	mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(mp->reset_gpio)) {
> +		dev_err(dev, "Get reset gpio failed\n");
> +		return PTR_ERR(mp->reset_gpio);
> +	}
> +
> +	ret = meson_pcie_get_resets(mp);
> +	if (ret) {
> +		dev_err(dev, "Get reset resource failed, %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = meson_pcie_get_mems(pdev, mp);
> +	if (ret) {
> +		dev_err(dev, "Get memory resource failed, %d\n", ret);
> +		return ret;
> +	}
> +
> +	meson_pcie_power_on(mp);
> +	meson_pcie_reset(mp);
> +
> +	ret = meson_pcie_probe_clocks(mp);
> +	if (ret) {
> +		dev_err(dev, "Init clock resources failed, %d\n", ret);
> +		return ret;
> +	}
> +
> +	platform_set_drvdata(pdev, mp);
> +
> +	ret = meson_add_pcie_port(mp, pdev);
> +	if (ret < 0) {
> +		dev_err(dev, "Add PCIE port failed, %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id meson_pcie_of_match[] = {
> +	{
> +		.compatible = "amlogic,axg-pcie",
> +	},
> +	{},
> +};
> +
> +static struct platform_driver meson_pcie_driver = {
> +	.probe = meson_pcie_probe,
> +	.driver = {
> +		.name = "meson-pcie",
> +		.of_match_table = meson_pcie_of_match,
> +	},
> +};
> +
> +builtin_platform_driver(meson_pcie_driver);
> -- 
> 2.7.4
>