[RFC PATCH v6 07/11] x86/cet/ibt: Add ENDBR to op-code-map

From: Yu-cheng Yu
Date: Mon Nov 19 2018 - 16:55:05 EST


Add control transfer terminating instructions:

ENDBR64/ENDBR32:
Mark a valid 64/32-bit control transfer endpoint.

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>
---
arch/x86/lib/x86-opcode-map.txt | 13 +++++++++++--
tools/objtool/arch/x86/lib/x86-opcode-map.txt | 13 +++++++++++--
2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index c5e825d44766..fbc53481bc59 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -620,7 +620,16 @@ ea: SAVEPREVSSP (f3)
# Skip 0xeb-0xff
EndTable

-Table: 3-byte opcode 2 (0x0f 0x38)
+Table: 3-byte opcode 2 (0x0f 0x1e)
+Referrer:
+AVXcode:
+# Skip 0x00-0xf9
+fa: ENDBR64 (f3)
+fb: ENDBR32 (f3)
+#skip 0xfc-0xff
+EndTable
+
+Table: 3-byte opcode 3 (0x0f 0x38)
Referrer: 3-byte escape 1
AVXcode: 2
# 0x0f 0x38 0x00-0x0f
@@ -804,7 +813,7 @@ f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
EndTable

-Table: 3-byte opcode 3 (0x0f 0x3a)
+Table: 3-byte opcode 4 (0x0f 0x3a)
Referrer: 3-byte escape 2
AVXcode: 3
# 0x0f 0x3a 0x00-0xff
diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
index c5e825d44766..fbc53481bc59 100644
--- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
@@ -620,7 +620,16 @@ ea: SAVEPREVSSP (f3)
# Skip 0xeb-0xff
EndTable

-Table: 3-byte opcode 2 (0x0f 0x38)
+Table: 3-byte opcode 2 (0x0f 0x1e)
+Referrer:
+AVXcode:
+# Skip 0x00-0xf9
+fa: ENDBR64 (f3)
+fb: ENDBR32 (f3)
+#skip 0xfc-0xff
+EndTable
+
+Table: 3-byte opcode 3 (0x0f 0x38)
Referrer: 3-byte escape 1
AVXcode: 2
# 0x0f 0x38 0x00-0x0f
@@ -804,7 +813,7 @@ f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
EndTable

-Table: 3-byte opcode 3 (0x0f 0x3a)
+Table: 3-byte opcode 4 (0x0f 0x3a)
Referrer: 3-byte escape 2
AVXcode: 3
# 0x0f 0x3a 0x00-0xff
--
2.17.1