Re: DVB-S PCI card regression on 4.19 / 4.20

[Malcolm Priestley]

Hi 

On 19/11/2018 17:53, Mauro Carvalho Chehab wrote:
> Hi Takashi,
> 
> Em Mon, 19 Nov 2018 16:13:29 +0100
> Takashi Iwai <tiwai@xxxxxxx> escreveu:
> 
>> Hi,
>>
>> we've got a regression report on openSUSE Bugzilla regarding DVB-S PCI
>> card:
>>   https://bugzilla.opensuse.org/show_bug.cgi?id=1116374
>>
>> According to the reporter (Stakanov, Cc'ed), the card worked fine on
>> 4.18.15, but since 4.19, it doesn't give any channels, sound nor
>> picture, but only EPG is received.
> 
> Receiving just EPG is weird.
> 
>>
>> The following errors might be relevant:
>>
>> ================
>> [    4.845180] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
>> [    4.869703] b2c2-flexcop: MAC address = xx:xx:xx:xx:xx:xx
>> [    5.100318] b2c2-flexcop: found 'ST STV0299 DVB-S' .
>> [    5.100323] b2c2_flexcop_pci 0000:06:06.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
>> [    5.100370] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
> 
> 
>> [  117.513086] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0 frequency 1549000 out of range (950000..2150)
>> [  124.905222] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0 frequency 1880000 out of range (950000..2150)
>> [  127.337079] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0 frequency 1353500 out of range (950000..2150)
> 
> That indicates that it is trying to tune to an unsupported frequency. For
> DVB-S, all frequencies above should be in kHz.

Kaffeine reports the wrong LNB frequency ranges for universal Europe... I just use Astra 1E settings instead which I am pretty sure is the same?

I am using the stv0299 / dvb_pll(opera1) combi and not reporting any problems other than the streaming issue with dvb-usb-v2 which I don't think this uses?

Regards

Malcolm