Re: [PATCH v2 3/5] phy: ocelot-serdes: convert to use eth phy mode and submode

From: Quentin Schulz
Date: Fri Nov 16 2018 - 06:15:49 EST


Hi Grygorii,

On Fri, Nov 09, 2018 at 05:47:53PM -0600, Grygorii Strashko wrote:
> Convert ocelot-serdes PHY driver to use recently introduced
> PHY_MODE_ETHERNET and phy_set_mode_ext().
>

Thanks for the patch, it's annoying to have to map PHY_MODE_SGMII and
PHY_INTERFACE_MODE_SGMII :)

> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
> ---
> drivers/net/ethernet/mscc/ocelot.c | 9 ++-------
> drivers/phy/mscc/phy-ocelot-serdes.c | 14 ++++++++++----
> 2 files changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> index 3238b9e..3edb608 100644
> --- a/drivers/net/ethernet/mscc/ocelot.c
> +++ b/drivers/net/ethernet/mscc/ocelot.c
> @@ -472,7 +472,6 @@ static int ocelot_port_open(struct net_device *dev)
> {
> struct ocelot_port *port = netdev_priv(dev);
> struct ocelot *ocelot = port->ocelot;
> - enum phy_mode phy_mode;
> int err;
>
> /* Enable receiving frames on the port, and activate auto-learning of
> @@ -484,12 +483,8 @@ static int ocelot_port_open(struct net_device *dev)
> ANA_PORT_PORT_CFG, port->chip_port);
>
> if (port->serdes) {
> - if (port->phy_mode == PHY_INTERFACE_MODE_SGMII)
> - phy_mode = PHY_MODE_SGMII;
> - else
> - phy_mode = PHY_MODE_QSGMII;
> -
> - err = phy_set_mode(port->serdes, phy_mode);
> + err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET,
> + port->phy_mode);
> if (err) {
> netdev_err(dev, "Could not set mode of SerDes\n");
> return err;
> diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c
> index c61a9890..f525a21 100644
> --- a/drivers/phy/mscc/phy-ocelot-serdes.c
> +++ b/drivers/phy/mscc/phy-ocelot-serdes.c
> @@ -11,6 +11,7 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_platform.h>
> +#include <linux/phy.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> @@ -116,8 +117,10 @@ struct serdes_mux {
> .mux = _mux, \
> }
>
> -#define SERDES_MUX_SGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_SGMII, m, c)
> -#define SERDES_MUX_QSGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_QSGMII, m, c)
> +#define SERDES_MUX_SGMII(i, p, m, c) \
> + SERDES_MUX(i, p, PHY_INTERFACE_MODE_SGMII, m, c)
> +#define SERDES_MUX_QSGMII(i, p, m, c) \
> + SERDES_MUX(i, p, PHY_INTERFACE_MODE_QSGMII, m, c)
>
> static const struct serdes_mux ocelot_serdes_muxes[] = {
> SERDES_MUX_SGMII(SERDES1G(0), 0, 0, 0),
> @@ -164,12 +167,15 @@ static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> unsigned int i;
> int ret;
>
> + if (mode != PHY_MODE_ETHERNET)
> + return -EINVAL;
> +

This works for now because we only support Ethernet muxes for now but
this IP also supports PHY_MODE_PCIE.

It seems weird to me that the day we'll add support for PCIE muxing we
will have in ocelot_serdes_muxes[i].mode either a PHY_INTERFACE_MODE_*
or a PHY_MODE_PCIE. This is not an issue for now since you do the mode
!= PHY_MODE_ETHERNET just above but once we get rid of this, we only
test for submode != ocelot_serdes_muxes[i].mode and both
PHY_INTERFACE_MODE_1000BASEX and PHY_MODE_PCIE will have the same index
thus might be confused.

Should we add a submode to the SERDES_MUX macro, move PHY_MODE_*MII to
this submode and have PHY_MODE_ETHERNET/PCIE in the mode field?

Thanks,
Quentin

Attachment: signature.asc
Description: PGP signature