Re: [PATCH 2/2] clk: Add Fixed MMIO clock driver

[Stephen Boyd]

Quoting Janek Kotas (2018-11-14 07:24:39)
> This patch adds a driver for Fixed MMIO clock.
> The driver reads a clock frequency value from a single 32-bit memory
> mapped register and registers it as a fixed rate clock.
> 
> It can be enabled with COMMON_CLK_FIXED_MMIO Kconfig option.
> 
> Signed-off-by: Jan Kotas <jank@xxxxxxxxxxx>

Sounds like a fine idea. Except I can see how it will be abused if there
are a handful of these fixed rate "clks" somewhere in memory that all
get populated. 

Do you really have a fixed rate clk in hardware that exposes a single
register, or do you have a set of them that some firmware is populating
into an I/O memory space that we can read the fixed rates from? If it's
the latter, I wonder why we can't just have the firmware populate the
fixed rate clks into DT itself?

> diff --git a/drivers/clk/clk-fixed-mmio.c b/drivers/clk/clk-fixed-mmio.c
> new file mode 100644
> index 0000000000..bbcadab345
> --- /dev/null
> +++ b/drivers/clk/clk-fixed-mmio.c
> @@ -0,0 +1,49 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/*
> + * Memory Mapped IO Fixed Clock driver
> + *
> + * Copyright (C) 2018 Cadence Design Systems, Inc.
> + *
> + * Authors:
> + *     Jan Kotas <jank@xxxxxxxxxxx>
> + */
> +
> +#include <linux/clk.h>

Is this include used?

> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/regmap.h>

Is this include used?

> +
> +static void __init of_fixed_mmio_clk_setup(struct device_node *node)
> +{
> +       struct clk *clk;
> +       const char *clk_name = node->name;
> +       void __iomem *base;
> +       u32 clk_freq;
> +
> +       base = of_iomap(node, 0);
> +       if (!base) {
> +               pr_err("%pOFn: failed to map address\n", node);
> +               return;
> +       }
> +
> +       clk_freq = readl(base);
> +       iounmap(base);
> +       of_property_read_string(node, "clock-output-names", &clk_name);
> +
> +       clk = clk_register_fixed_rate(NULL, clk_name, NULL, 0, clk_freq);
> +       if (IS_ERR(clk)) {
> +               pr_err("%pOFn: failed to register fixed rate clock\n", node);
> +               return;
> +       }
> +
> +       if (of_clk_add_provider(node, of_clk_src_simple_get, clk)) {
> +               pr_err("%pOFn: failed to add clock provider\n", node);
> +               return;
> +       }
> +
> +       pr_info("%pOFn: registered fixed-mmio-clock at %u Hz\n",
> +               node, clk_freq);

Please no "I'm alive!" messages.

> +}
> +
> +CLK_OF_DECLARE(fixed_mmio_clk, "fixed-mmio-clock", of_fixed_mmio_clk_setup);

Any reason why this can't be a platform driver? It would make this much
less DT specific and usable on other firmwares/platforms if we used a
platform driver here.