[PATCH v4 09/26] drm/sun4i: sun6i_mipi_dsi: Fix TCON DRQ set bits

From: Jagan Teki
Date: Tue Nov 13 2018 - 06:17:49 EST


TCON DRQ set bits for non-burst DSI mode can computed via
horizontal front porch instead of front porch + sync timings.

BSP code form BPI-M64-bsp is computing TCON DRQ set bits
for non-burts as (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)

=> panel->lcd_ht - panel->lcd_x - panel->lcd_hbp
=> (timmings->hor_front_porch + panel->lcd_hbp + panel->lcd_x)
- panel->lcd_x - panel->hbp
=> timmings->hor_front_porch
=> mode->hsync_start - mode->hdisplay

So, update the DRQ set bits accordingly.

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index eeea977604ac..fc4252d96c38 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -367,9 +367,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
struct mipi_dsi_device *device = dsi->device;
u32 val = 0;

- if ((mode->hsync_end - mode->hdisplay) > 20) {
+ if ((mode->hsync_start - mode->hdisplay) > 20) {
/* Maaaaaagic */
- u16 drq = (mode->hsync_end - mode->hdisplay) - 20;
+ u16 drq = (mode->hsync_start - mode->hdisplay) - 20;

drq *= mipi_dsi_pixel_format_to_bpp(device->format);
drq /= 32;
--
2.18.0.321.gffc6fa0e3