Re: [PATCH 1/5] dt-bindings: media: Add Allwinner A10 CSI binding

From: Sakari Ailus
Date: Tue Nov 13 2018 - 03:39:10 EST


Hi Maxime,

On Tue, Nov 13, 2018 at 09:24:13AM +0100, Maxime Ripard wrote:
> The Allwinner A10 CMOS Sensor Interface is a camera capture interface also
> used in later (A10s, A13, A20, R8 and GR8) SoCs.
>
> On some SoCs, like the A10, there's multiple instances of that controller,
> with one instance supporting more channels and having an ISP.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/media/sun4i-csi.txt | 71 ++++++++++++-
> 1 file changed, 71 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/sun4i-csi.txt
>
> diff --git a/Documentation/devicetree/bindings/media/sun4i-csi.txt b/Documentation/devicetree/bindings/media/sun4i-csi.txt
> new file mode 100644
> index 000000000000..3d96bcbef9d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/sun4i-csi.txt
> @@ -0,0 +1,71 @@
> +Allwinner A10 CMOS Sensor Interface
> +-------------------------------------
> +
> +The Allwinner A10 SoC features two camera capture interfaces, one
> +featuring an ISP and the other without. Later SoCs built upon that
> +design and used similar SoCs.
> +
> +Required properties:
> + - compatible: value must be one of:
> + * allwinner,sun4i-a10-csi
> + * allwinner,sun5i-a13-csi, allwinner,sun4i-a10-csi
> + * allwinner,sun7i-a20-csi, allwinner,sun4i-a10-csi
> + - reg: base address and size of the memory-mapped region.
> + - interrupts: interrupt associated to this IP
> + - clocks: phandles to the clocks feeding the CSI
> + * ahb: the CSI interface clock
> + * mod: the CSI module clock
> + * ram: the CSI DRAM clock
> + - clock-names: the clock names mentioned above
> + - resets: phandles to the reset line driving the CSI
> +
> +Optional properties:
> + - allwinner,csi-channels: Number of channels available in the CSI
> + controller. If not present, the default
> + will be 1.
> + - allwinner,has-isp: Whether the CSI controller has an ISP
> + associated to it or not

Is the ISP a part of the same device? It sounds like that this is actually
a different device if it contains an ISP as well, and that should be
apparent from the compatible string. What do you think?

> +
> +If allwinner,has-isp is set, an additional "isp" clock is needed,
> +being a phandle to the clock driving the ISP.
> +
> +The CSI node should contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt. The
> +endpoint's bus type must be parallel or BT656.
> +
> +Endpoint node properties for CSI
> +---------------------------------
> +
> +- remote-endpoint : (required) a phandle to the bus receiver's endpoint
> + node

Rob's opinion has been (AFAIU) that this is not needed as it's already a
part of the graph bindings. Unless you want to say that it's required, that
is --- the graph bindings document it as optional.

> +- bus-width: : (required) must be 8

If this is the only value the hardware supports, I don't see why you should
specify it here.

> +- pclk-sample : (optional) (default: sample on falling edge)
> +- hsync-active : (only required for parallel)
> +- vsync-active : (only required for parallel)
> +
> +Example:
> +
> +csi0: csi@1c09000 {
> + compatible = "allwinner,sun7i-a20-csi",
> + "allwinner,sun4i-a10-csi";
> + reg = <0x01c09000 0x1000>;
> + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
> + <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
> + clock-names = "ahb", "mod", "isp", "ram";
> + resets = <&ccu RST_CSI0>;
> + allwinner,csi-channels = <4>;
> + allwinner,has-isp;
> +
> + port {
> + csi_from_ov5640: endpoint {
> + remote-endpoint = <&ov5640_to_csi>;
> + bus-width = <8>;
> + data-shift = <2>;

data-shift needs to be documented above if it's relevant for the device.

> + hsync-active = <1>; /* Active high */
> + vsync-active = <0>; /* Active low */
> + pclk-sample = <1>; /* Rising */
> + };
> + };
> +};

--
Kind regards,

Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx