Re: [PATCH v2] mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL

From: Rajat Jain
Date: Mon Nov 12 2018 - 20:27:31 EST


On Mon, Nov 12, 2018 at 3:26 AM Andy Shevchenko
<andy.shevchenko@xxxxxxxxx> wrote:
>
> On Mon, Nov 12, 2018 at 1:05 PM Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> >
> > On 29 October 2018 at 23:17, Rajat Jain <rajatja@xxxxxxxxxx> wrote:
> > > Problem:
> > >
> > > The card detect IRQ does not work with modern BIOS (that want
> > > to use _DSD to provide the card detect GPIO to the driver).
> > >
> > > Details:
> > >
> > > The mmc core provides the mmc_gpiod_request_cd() API to let host drivers
> > > request the gpio descriptor for the "card detect" pin.
> > > This pin is specified in the ACPI for the SDHC device:
> > >
> > > * Either as a resource using _CRS. This is a method used by legacy BIOS.
> > > (The driver needs to tell which resource index).
> > >
> > > * Or as a named property ("cd-gpios"/"cd-gpio") in _DSD (which internally
> > > points to an entry in _CRS). This way, the driver can lookup using a
> > > string. This is what modern BIOS prefer to use.
> > >
> > > This API finally results in a call to the following code:
> > >
> > > struct gpio_desc *acpi_find_gpio(..., const char *con_id,...)
> > > {
> > > ...
> > > /* Lookup gpio (using "<con_id>-gpio") in the _DSD */
> > > ...
> > > if (!acpi_can_fallback_to_crs(adev, con_id))
> > > return ERR_PTR(-ENOENT);
> > > ...
> > > /* Falling back to _CRS is allowed, Lookup gpio in the _CRS */
> > > ...
> > > }
> > >
> > > Note that this means that if the ACPI has _DSD properties, the kernel
> > > will never use _CRS for the lookup (Because acpi_can_fallback_to_crs()
> > > will always be false for any device hat has _DSD entries).
> > >
> > > The SDHCI driver is thus currently broken on a modern BIOS, even if
> > > BIOS provides both _CRS (for index based lookup) and _DSD entries (for
> > > string based lookup). Ironically, none of these will be used for the
> > > lookup currently because:
> > >
> > > * Since the con_id is NULL, acpi_find_gpio() does not find a matching
> > > entry in DSDT. (The _DSDT entry has the property name = "cd-gpios")
> > >
> > > * Because ACPI contains DSDT entries, thus acpi_can_fallback_to_crs()
> > > returns false (because device properties have been populated from
> > > _DSD), thus the _CRS is never used for the lookup.
> > >
> > > Fix:
> > >
> > > Try "cd" for lookup in the _DSD before falling back to using NULL so
> > > as to try looking up in the _CRS.
> > >
> > > I've tested this patch successfully with both Legacy BIOS (that
> > > provide only _CRS method) as well as modern BIOS (that provide both
> > > _CRS and _DSD). Also the use of "cd" appears to be fairly consistent
> > > across other users of this API (other MMC host controller drivers).
> > >
> > > Link: https://lkml.org/lkml/2018/9/25/1113
> > > Signed-off-by: Rajat Jain <rajatja@xxxxxxxxxx>
> >
> > Applied for fixes, thanks!
> >
> > Should I add a stable tag to this as well?
>
> If you go with that it might make sense to have Fixes tag against
>
> commit f10e4bf6632b5be11cea875b66ba959833a69258
> Author: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Date: Tue May 23 20:03:19 2017 +0300
>
> gpio: acpi: Even more tighten up ACPI GPIO lookups
>

I agree.

Thanks,

Rajat


> --
> With Best Regards,
> Andy Shevchenko