[PATCH 0/4] PCI / iommu / thunderbolt: IOMMU based DMA protection

From: Mika Westerberg
Date: Mon Nov 12 2018 - 11:06:35 EST


Hi all,

Recent systems shipping with Windows 10 version 1803 or newer may be
utilizing IOMMU to prevent DMA attacks via Thunderbolt ports. This is
different from the previous security level based scheme because the
connected device cannot access system memory outside of the regions
allocated for it by the driver.

When enabled the BIOS makes sure no device can do DMA outside of RMRR
(Reserved Memory Region Record) regions. This means that during OS boot,
before it enables IOMMU, none of the connected devices can bypass DMA
protection for instance by overwriting the data structures used by the
IOMMU. The BIOS communicates support for this to the OS by setting a new
bit in ACPI DMAR table [1].

Because these systems utilize an IOMMU to block possible DMA attacks,
typically (but not always) the Thunderbolt security level is set to "none"
which means that all PCIe devices are immediately usable. This also means
that Linux needs to follow Windows 10 and enable IOMMU automatically when
running on such system otherwise connected devices can read/write system
memory pretty much without any restrictions.

Since there is a way to identify PCIe root ports that are "external facing"
we can put all internal devices to pass through (identity mapping) mode and
only external devices need to go through full IOMMU mappings.

We also make sure PCIe ATS (Address Translation Service) is not enabled for
external devices because it could be used to bypass IOMMU completely as
explained in the changelog of patch 3/4.

Finally we expose this information to userspace so tools such as bolt can
do more accurate decision whether or not authorize the connected device.

[1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf

Lu Baolu (1):
iommu/vt-d: Force IOMMU on for platform opt in hint

Mika Westerberg (3):
PCI / ACPI: Identify external PCI devices
iommu/vt-d: Do not enable ATS for external devices
thunderbolt: Export IOMMU based DMA protection support to userspace

.../ABI/testing/sysfs-bus-thunderbolt | 9 +++
Documentation/admin-guide/thunderbolt.rst | 23 ++++++++
drivers/acpi/property.c | 3 +
drivers/iommu/dmar.c | 25 ++++++++
drivers/iommu/intel-iommu.c | 58 ++++++++++++++++++-
drivers/pci/pci-acpi.c | 13 +++++
drivers/pci/probe.c | 23 ++++++++
drivers/thunderbolt/domain.c | 17 ++++++
include/linux/dmar.h | 8 +++
include/linux/pci.h | 1 +
10 files changed, 177 insertions(+), 3 deletions(-)

--
2.19.1