[RFC PATCH 09/13] m68k: bvme6000: Convert to clocksource API

From: Finn Thain
Date: Sun Nov 11 2018 - 23:47:25 EST


Add a platform clocksource by adapting the existing arch_gettimeoffset
implementation.

Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
arch/m68k/bvme6000/config.c | 54 ++++++++++++++++++++++++-------------
1 file changed, 35 insertions(+), 19 deletions(-)

diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 3bd56bd04690..099cc6edebc8 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/tty.h>
+#include <linux/clocksource.h>
#include <linux/console.h>
#include <linux/linkage.h>
#include <linux/init.h>
@@ -43,12 +44,6 @@ extern int bvme6000_hwclk (int, struct rtc_time *);
extern void bvme6000_reset (void);
void bvme6000_set_vectors (void);

-/* Save tick handler routine pointer, will point to xtime_update() in
- * kernel/timer/timekeeping.c, called via bvme6000_process_int() */
-
-static irq_handler_t tick_handler;
-
-
int __init bvme6000_parse_bootinfo(const struct bi_record *bi)
{
if (be16_to_cpu(bi->tag) == BI_VME_TYPE)
@@ -152,13 +147,34 @@ irqreturn_t bvme6000_abort_int (int irq, void *dev_id)
return IRQ_HANDLED;
}

+static u64 bvme6000_read_clk(struct clocksource *cs);
+
+static struct clocksource bvme6000_clk = {
+ .name = "rtc",
+ .rating = 250,
+ .read = bvme6000_read_clk,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u32 clk_total;
+
+#define RTC_TIMER_CLOCK_FREQ 8000000
+#define RTC_TIMER_CYCLES (RTC_TIMER_CLOCK_FREQ / HZ)
+#define RTC_TIMER_COUNT ((RTC_TIMER_CYCLES / 2) - 1)

static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
{
+ irq_handler_t tick_handler = dev_id;
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
- unsigned char msr = rtc->msr & 0xc0;
+ unsigned char msr;
+ unsigned long flags;

+ local_irq_save(flags);
+ msr = rtc->msr & 0xc0;
rtc->msr = msr | 0x20; /* Ack the interrupt */
+ clk_total += RTC_TIMER_CYCLES;
+ local_irq_restore(flags);

return tick_handler(irq, dev_id);
}
@@ -179,14 +195,13 @@ void bvme6000_sched_init (irq_handler_t timer_routine)

rtc->msr = 0; /* Ensure timer registers accessible */

- tick_handler = timer_routine;
- if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, 0,
- "timer", bvme6000_timer_int))
+ if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, IRQF_TIMER,
+ "timer", timer_routine))
panic ("Couldn't register timer int");

rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */
- rtc->t1msb = 39999 >> 8;
- rtc->t1lsb = 39999 & 0xff;
+ rtc->t1msb = RTC_TIMER_COUNT >> 8;
+ rtc->t1lsb = RTC_TIMER_COUNT & 0xff;
rtc->irr_icr1 &= 0xef; /* Route timer 1 to INTR pin */
rtc->msr = 0x40; /* Access int.cntrl, etc */
rtc->pfr_icr0 = 0x80; /* Just timer 1 ints enabled */
@@ -198,6 +213,8 @@ void bvme6000_sched_init (irq_handler_t timer_routine)

rtc->msr = msr;

+ clocksource_register_hz(&bvme6000_clk, RTC_TIMER_CLOCK_FREQ);
+
if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0,
"abort", bvme6000_abort_int))
panic ("Couldn't register abort int");
@@ -211,7 +228,7 @@ void bvme6000_sched_init (irq_handler_t timer_routine)
* results...
*/

-u32 bvme6000_gettimeoffset(void)
+static u64 bvme6000_read_clk(struct clocksource *cs)
{
unsigned long flags;
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
@@ -235,19 +252,18 @@ u32 bvme6000_gettimeoffset(void)
} while (t1int != (rtc->msr & 0x20) ||
t1op != (pit->pcdr & 0x04) ||
abs(ov-v) > 80 ||
- v > 39960);
+ v > RTC_TIMER_COUNT - (RTC_TIMER_COUNT / 100));

- v = 39999 - v;
+ v = RTC_TIMER_COUNT - v;
if (!t1op) /* If in second half cycle.. */
- v += 40000;
- v /= 8; /* Convert ticks to microseconds */
+ v += RTC_TIMER_CYCLES / 2;
if (t1int)
- v += 10000; /* Int pending, + 10ms */
+ v += RTC_TIMER_CYCLES;
rtc->msr = msr;

local_irq_restore(flags);

- return v * 1000;
+ return clk_total + v;
}

/*
--
2.18.1