Re: [RFC PATCH] mm, memory_hotplug: do not clear numa_node association after hot_remove

From: Michal Hocko
Date: Fri Nov 09 2018 - 06:07:37 EST


On Fri 09-11-18 16:34:29, Anshuman Khandual wrote:
>
>
> On 11/09/2018 01:29 PM, Michal Hocko wrote:
> > On Fri 09-11-18 09:12:09, Anshuman Khandual wrote:
> >>
> >>
> >> On 11/08/2018 03:59 PM, Michal Hocko wrote:
> >>> [Removing Wen Congyang and Tang Chen from the CC list because their
> >>> emails bounce. It seems that we will never learn about their motivation]
> >>>
> >>> On Thu 08-11-18 11:04:13, Michal Hocko wrote:
> >>>> From: Michal Hocko <mhocko@xxxxxxxx>
> >>>>
> >>>> Per-cpu numa_node provides a default node for each possible cpu. The
> >>>> association gets initialized during the boot when the architecture
> >>>> specific code explores cpu->NUMA affinity. When the whole NUMA node is
> >>>> removed though we are clearing this association
> >>>>
> >>>> try_offline_node
> >>>> check_and_unmap_cpu_on_node
> >>>> unmap_cpu_on_node
> >>>> numa_clear_node
> >>>> numa_set_node(cpu, NUMA_NO_NODE)
> >>>>
> >>>> This means that whoever calls cpu_to_node for a cpu associated with such
> >>>> a node will get NUMA_NO_NODE. This is problematic for two reasons. First
> >>>> it is fragile because __alloc_pages_node would simply blow up on an
> >>>> out-of-bound access. We have encountered this when loading kvm module
> >>>> BUG: unable to handle kernel paging request at 00000000000021c0
> >>>> IP: [<ffffffff8119ccb3>] __alloc_pages_nodemask+0x93/0xb70
> >>>> PGD 800000ffe853e067 PUD 7336bbc067 PMD 0
> >>>> Oops: 0000 [#1] SMP
> >>>> [...]
> >>>> CPU: 88 PID: 1223749 Comm: modprobe Tainted: G W 4.4.156-94.64-default #1
> >>>> task: ffff88727eff1880 ti: ffff887354490000 task.ti: ffff887354490000
> >>>> RIP: 0010:[<ffffffff8119ccb3>] [<ffffffff8119ccb3>] __alloc_pages_nodemask+0x93/0xb70
> >>>> RSP: 0018:ffff887354493b40 EFLAGS: 00010202
> >>>> RAX: 00000000000021c0 RBX: 0000000000000000 RCX: 0000000000000000
> >>>> RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00000000014000c0
> >>>> RBP: 00000000014000c0 R08: ffffffffffffffff R09: 0000000000000000
> >>>> R10: ffff88fffc89e790 R11: 0000000000014000 R12: 0000000000000101
> >>>> R13: ffffffffa0772cd4 R14: ffffffffa0769ac0 R15: 0000000000000000
> >>>> FS: 00007fdf2f2f1700(0000) GS:ffff88fffc880000(0000) knlGS:0000000000000000
> >>>> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>>> CR2: 00000000000021c0 CR3: 00000077205ee000 CR4: 0000000000360670
> >>>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> >>>> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> >>>> Stack:
> >>>> 0000000000000086 014000c014d20400 ffff887354493bb8 ffff882614d20f4c
> >>>> 0000000000000000 0000000000000046 0000000000000046 ffffffff810ac0c9
> >>>> ffff88ffe78c0000 ffffffff0000009f ffffe8ffe82d3500 ffff88ff8ac55000
> >>>> Call Trace:
> >>>> [<ffffffffa07476cd>] alloc_vmcs_cpu+0x3d/0x90 [kvm_intel]
> >>>> [<ffffffffa0772c0c>] hardware_setup+0x781/0x849 [kvm_intel]
> >>>> [<ffffffffa04a1c58>] kvm_arch_hardware_setup+0x28/0x190 [kvm]
> >>>> [<ffffffffa04856fc>] kvm_init+0x7c/0x2d0 [kvm]
> >>>> [<ffffffffa0772cf2>] vmx_init+0x1e/0x32c [kvm_intel]
> >>>> [<ffffffff8100213a>] do_one_initcall+0xca/0x1f0
> >>>> [<ffffffff81193886>] do_init_module+0x5a/0x1d7
> >>>> [<ffffffff81112083>] load_module+0x1393/0x1c90
> >>>> [<ffffffff81112b30>] SYSC_finit_module+0x70/0xa0
> >>>> [<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7
> >>>> DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xb7
> >>>>
> >>>> on an older kernel but the code is basically the same in the current
> >>>> Linus tree as well. alloc_vmcs_cpu could use alloc_pages_nodemask which
> >>>> would recognize NUMA_NO_NODE and use alloc_pages_node which would translate
> >>>> it to numa_mem_id but that is wrong as well because it would use a cpu
> >>>> affinity of the local CPU which might be quite far from the original node.
> >>
> >> But then the original node is getting/already off-lined. The allocation is
> >> going to come from a different node. alloc_pages_node() at least steer the
> >> allocation alway from VM_BUG_ON() because of NUMA_NO_NODE by replacing it
> >> with numa_mem_id().
> >>
> >> If node fallback order is important for this allocation then could not it
> >> use __alloc_pages_nodemask() directly giving preference for its zonelist
> >> node and nodemask. Just curious.
> >
> > How does the caller get the right node to allocate from? We do have the
> > proper zone list for the offline node so why not use it?
> I get your point. NODE_DATA() for the off lined node is still around and
> so does the proper zone list for allocation, so why the caller should work
> around the problem by building it's preferred nodemask_t etc. No problem,
> I was just curious.

I thought I've made it cler in the changelog. If not, I am open to
suggestions on how to make it more clear.
--
Michal Hocko
SUSE Labs