[PATCH v2 2/7] tty: Remove trailing whitespace

From: Tobin C. Harding
Date: Thu Oct 18 2018 - 18:38:22 EST


Currently files under drivers/tty/ contain trailing whitespace. This is
easy to fix and easy to review so lets do it now before we do other
kernel-docs cleanups.

Signed-off-by: Tobin C. Harding <tobin@xxxxxxxxxx>
---
drivers/tty/amiserial.c | 19 +-
drivers/tty/cyclades.c | 2 +-
drivers/tty/hvc/hvc_console.c | 2 +-
drivers/tty/hvc/hvc_xen.c | 2 +-
drivers/tty/hvc/hvcs.c | 4 +-
drivers/tty/moxa.c | 8 +-
drivers/tty/mxser.c | 4 +-
drivers/tty/n_hdlc.c | 154 ++---
drivers/tty/n_r3964.c | 6 +-
drivers/tty/rocket.c | 70 +--
drivers/tty/serial/21285.c | 2 +-
drivers/tty/serial/amba-pl010.c | 2 +-
drivers/tty/serial/max3100.c | 2 +-
drivers/tty/serial/max310x.c | 2 +-
drivers/tty/serial/mux.c | 12 +-
drivers/tty/serial/pmac_zilog.c | 58 +-
drivers/tty/serial/sa1100.c | 2 +-
drivers/tty/serial/sunsab.c | 14 +-
drivers/tty/serial/sunsu.c | 4 +-
drivers/tty/serial/sunzilog.c | 8 +-
drivers/tty/synclink.c | 1016 +++++++++++++++----------------
drivers/tty/synclinkmp.c | 16 +-
drivers/tty/tty_io.c | 2 +-
drivers/tty/tty_ioctl.c | 2 +-
drivers/tty/vt/consolemap.c | 50 +-
drivers/tty/vt/keyboard.c | 2 +-
drivers/tty/vt/vt.c | 12 +-
drivers/tty/vt/vt_ioctl.c | 16 +-
28 files changed, 746 insertions(+), 747 deletions(-)

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 73d4033cef6b..7027b85e0428 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -17,7 +17,7 @@
* Richard Lucock 28/12/99
*
* Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997,
+ * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997,
* 1998, 1999 Theodore Ts'o
*
*/
@@ -239,7 +239,7 @@ static void rs_start(struct tty_struct *tty)
* rs_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
- *
+ *
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
*
* and look at the resulting assemble code in serial.s.
@@ -746,7 +746,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
if (I_IGNBRK(tty)) {
info->ignore_status_mask |= UART_LSR_BI;
/*
- * If we're ignore parity and break indicators, ignore
+ * If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(tty))
@@ -940,7 +940,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
/*
* ------------------------------------------------------------
* rs_throttle()
- *
+ *
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
@@ -1085,7 +1085,6 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
return retval;
}

-
/*
* get_lsr_info - get line status register info
*
@@ -1266,7 +1265,7 @@ static int rs_ioctl(struct tty_struct *tty,
local_irq_save(flags);
cnow = info->icount; /* atomic copy */
local_irq_restore(flags);
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
ret = -EIO; /* no change => error */
break;
@@ -1348,7 +1347,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/*
* ------------------------------------------------------------
* rs_close()
- *
+ *
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* async structure from the interrupt chain if necessary, and we free
@@ -1390,7 +1389,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
}
shutdown(tty, state);
rs_flush_buffer(tty);
-
+
tty_ldisc_flush(tty);
port->tty = NULL;

@@ -1418,7 +1417,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
* interval should also be less than the timeout.
- *
+ *
* Note: we have to use pretty tight timings here to satisfy
* the NIST-PCTS.
*/
@@ -1669,7 +1668,7 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
state = rs_table;
state->port = (int)&custom.serdatr; /* Just to give it a value */
state->custom_divisor = 0;
- state->icount.cts = state->icount.dsr =
+ state->icount.cts = state->icount.dsr =
state->icount.rng = state->icount.dcd = 0;
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 6d3c58051ce3..c82fce6f39ed 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1028,7 +1028,7 @@ static void cyz_handle_tx(struct cyclades_port *info)

if (!char_count)
return;
-
+
tty = tty_port_tty_get(&info->port);
if (tty == NULL)
goto ztxdone;
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 676cf5b73ed2..6d57d0bfff5d 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -204,7 +204,7 @@ static struct tty_driver *hvc_console_device(struct console *c, int *index)
}

static int hvc_console_setup(struct console *co, char *options)
-{
+{
if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES)
return -ENODEV;

diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index dc43fa96c3de..2c32dd544829 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -114,7 +114,7 @@ static int domU_write_console(uint32_t vtermno, const char *data, int len)
*/
while (len) {
int sent = __write_console(cons, data, len);
-
+
data += sent;
len -= sent;

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index cb4db1b3ca3c..2420068d69d8 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -153,8 +153,8 @@ MODULE_VERSION(HVCS_DRIVER_VERSION);
/*
* The hcall interface involves putting 8 chars into each of two registers.
* We load up those 2 registers (in arch/powerpc/platforms/pseries/hvconsole.c)
- * by casting char[16] to long[2]. It would work without __ALIGNED__, but a
- * little (tiny) bit slower because an unaligned load is slower than aligned
+ * by casting char[16] to long[2]. It would work without __ALIGNED__, but a
+ * little (tiny) bit slower because an unaligned load is slower than aligned
* load.
*/
#define __ALIGNED__ __attribute__((__aligned__(8)))
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 7ce06f43b6ae..91c3599a93d4 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -1635,10 +1635,10 @@ static void MoxaPortFlushData(struct moxa_port *port, int mode)
* Syntax:
* void MoxaPortFlushData(int port, int mode);
* int port : port number (0 - 127)
- * int mode
- * 0 : flush the Rx buffer
- * 1 : flush the Tx buffer
- * 2 : flush the Rx and Tx buffer
+ * int mode
+ * 0 : flush the Rx buffer
+ * 1 : flush the Tx buffer
+ * 2 : flush the Rx and Tx buffer
*
*
* Function 20: Write data.
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 3f800b35689e..aac8c747e85a 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1089,7 +1089,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&port->mutex);
info->closing = 0;
/* Right now the tty_port set is done outside of the close_end helper
- as we don't yet have everyone using refcounts */
+ as we don't yet have everyone using refcounts */
tty_port_close_end(port, tty);
tty_port_tty_set(port, NULL);
}
@@ -1517,7 +1517,7 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
mutex_lock(&port->mutex);
if (!ip->ioaddr)
goto copy;
-
+
tty = tty_port_tty_get(port);

if (!tty)
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 1f2e24424b44..789251f8a1e2 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -18,7 +18,7 @@
* All HDLC data is frame oriented which means:
*
* 1. tty write calls represent one complete transmit frame of data
- * The device driver should accept the complete frame or none of
+ * The device driver should accept the complete frame or none of
* the frame (busy) in the write method. Each write call should have
* a byte count in the range of 2-65535 bytes (2 is min HDLC frame
* with 1 addr byte and 1 ctrl byte). The max byte count of 65535
@@ -39,7 +39,7 @@
* tty read calls.
*
* 3. tty read calls returns an entire frame of data or nothing.
- *
+ *
* 4. all send and receive data is considered raw. No processing
* or translation is performed by the line discipline, regardless
* of the tty flags
@@ -107,7 +107,7 @@
/*
* Buffers for individual HDLC frames
*/
-#define MAX_HDLC_FRAME_SIZE 65535
+#define MAX_HDLC_FRAME_SIZE 65535
#define DEFAULT_RX_BUF_COUNT 10
#define MAX_RX_BUF_COUNT 60
#define DEFAULT_TX_BUF_COUNT 3
@@ -234,10 +234,10 @@ static void n_hdlc_release(struct n_hdlc *n_hdlc)
{
struct tty_struct *tty = n_hdlc2tty (n_hdlc);
struct n_hdlc_buf *buf;
-
- if (debuglevel >= DEBUG_LEVEL_INFO)
+
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
-
+
/* Ensure that the n_hdlcd process is not hanging on select()/poll() */
wake_up_interruptible (&tty->read_wait);
wake_up_interruptible (&tty->write_wait);
@@ -275,7 +275,7 @@ static void n_hdlc_release(struct n_hdlc *n_hdlc)
break;
}
kfree(n_hdlc);
-
+
} /* end of n_hdlc_release() */

/**
@@ -289,9 +289,9 @@ static void n_hdlc_tty_close(struct tty_struct *tty)
{
struct n_hdlc *n_hdlc = tty2n_hdlc (tty);

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
-
+
if (n_hdlc != NULL) {
if (n_hdlc->magic != HDLC_MAGIC) {
printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
@@ -311,10 +311,10 @@ static void n_hdlc_tty_close(struct tty_struct *tty)
n_hdlc_release (n_hdlc);
}
}
-
- if (debuglevel >= DEBUG_LEVEL_INFO)
+
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
-
+
} /* end of n_hdlc_tty_close() */

/**
@@ -327,40 +327,40 @@ static int n_hdlc_tty_open (struct tty_struct *tty)
{
struct n_hdlc *n_hdlc = tty2n_hdlc (tty);

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
__FILE__,__LINE__,
tty->name);
-
+
/* There should not be an existing table for this slot. */
if (n_hdlc) {
printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
return -EEXIST;
}
-
+
n_hdlc = n_hdlc_alloc();
if (!n_hdlc) {
printk (KERN_ERR "n_hdlc_alloc failed\n");
return -ENFILE;
}
-
+
tty->disc_data = n_hdlc;
n_hdlc->tty = tty;
tty->receive_room = 65536;
-
+
#if defined(TTY_NO_WRITE_SPLIT)
/* change tty_io write() to not split large writes into 8K chunks */
set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
#endif
-
+
/* flush receive data from driver */
tty_driver_flush_buffer(tty);
-
- if (debuglevel >= DEBUG_LEVEL_INFO)
+
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
-
+
return 0;
-
+
} /* end of n_tty_hdlc_open() */

/**
@@ -378,10 +378,10 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
unsigned long flags;
struct n_hdlc_buf *tbuf;

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
check_again:
-
+
spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
if (n_hdlc->tbusy) {
n_hdlc->woke_up = 1;
@@ -394,10 +394,10 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)

tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
while (tbuf) {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)sending frame %p, count=%d\n",
__FILE__,__LINE__,tbuf,tbuf->count);
-
+
/* Send the next block of data to device */
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
@@ -411,22 +411,22 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
/* pretending it was accepted by driver */
if (actual < 0)
actual = tbuf->count;
-
+
if (actual == tbuf->count) {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)frame %p completed\n",
__FILE__,__LINE__,tbuf);
-
+
/* free current transmit buffer */
n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);

/* wait up sleeping writers */
wake_up_interruptible(&tty->write_wait);
-
+
/* get next pending transmit buffer */
tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
} else {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)frame %p pending\n",
__FILE__,__LINE__,tbuf);

@@ -438,21 +438,21 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
break;
}
}
-
+
if (!tbuf)
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-
+
/* Clear the re-entry flag */
spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
n_hdlc->tbusy = 0;
- spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
-
+ spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
+
if (n_hdlc->woke_up)
goto check_again;

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
-
+
} /* end of n_hdlc_send_frames() */

/**
@@ -465,9 +465,9 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty)
{
struct n_hdlc *n_hdlc = tty2n_hdlc(tty);

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
-
+
if (!n_hdlc)
return;

@@ -477,7 +477,7 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty)
}

n_hdlc_send_frames (n_hdlc, tty);
-
+
} /* end of n_hdlc_tty_wakeup() */

/**
@@ -496,29 +496,29 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
register struct n_hdlc_buf *buf;

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
__FILE__,__LINE__, count);
-
+
/* This can happen if stuff comes in on the backup tty */
if (!n_hdlc || tty != n_hdlc->tty)
return;
-
+
/* verify line is using HDLC discipline */
if (n_hdlc->magic != HDLC_MAGIC) {
printk("%s(%d) line not using HDLC discipline\n",
__FILE__,__LINE__);
return;
}
-
+
if ( count>maxframe ) {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d) rx count>maxframesize, data discarded\n",
__FILE__,__LINE__);
return;
}

- /* get a free HDLC buffer */
+ /* get a free HDLC buffer */
buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
if (!buf) {
/* no buffers in free list, attempt to allocate another rx buffer */
@@ -526,21 +526,21 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
}
-
+
if (!buf) {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d) no more rx buffers, data discarded\n",
__FILE__,__LINE__);
return;
}
-
+
/* copy received data to HDLC buffer */
memcpy(buf->buf,data,count);
buf->count=count;

/* add HDLC buffer to list of received frames */
n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
-
+
/* wake up any blocked reads and perform async signalling */
wake_up_interruptible (&tty->read_wait);
if (n_hdlc->tty->fasync != NULL)
@@ -565,9 +565,9 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
struct n_hdlc_buf *rbuf;
DECLARE_WAITQUEUE(wait, current);

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
-
+
/* Validate the pointers */
if (!n_hdlc)
return -EIO;
@@ -610,7 +610,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
break;
}
-
+
/* no data */
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
@@ -629,7 +629,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
__set_current_state(TASK_RUNNING);

return ret;
-
+
} /* end of n_hdlc_tty_read() */

/**
@@ -649,10 +649,10 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
DECLARE_WAITQUEUE(wait, current);
struct n_hdlc_buf *tbuf;

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_write() called count=%zd\n",
__FILE__,__LINE__,count);
-
+
/* Verify pointers */
if (!n_hdlc)
return -EIO;
@@ -669,12 +669,12 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
maxframe );
count = maxframe;
}
-
+
add_wait_queue(&tty->write_wait, &wait);

for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
-
+
tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
if (tbuf)
break;
@@ -684,15 +684,15 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
break;
}
schedule();
-
+
n_hdlc = tty2n_hdlc (tty);
- if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
+ if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
tty != n_hdlc->tty) {
printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
error = -EIO;
break;
}
-
+
if (signal_pending(current)) {
error = -EINTR;
break;
@@ -702,7 +702,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
__set_current_state(TASK_RUNNING);
remove_wait_queue(&tty->write_wait, &wait);

- if (!error) {
+ if (!error) {
/* Retrieve the user's buffer */
memcpy(tbuf->buf, data, count);

@@ -713,7 +713,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
}

return error;
-
+
} /* end of n_hdlc_tty_write() */

/**
@@ -734,10 +734,10 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned long flags;
struct n_hdlc_buf *buf = NULL;

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
__FILE__,__LINE__,cmd);
-
+
/* Verify the status of the device */
if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
return -EBADF;
@@ -783,7 +783,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
break;
}
return error;
-
+
} /* end of n_hdlc_tty_ioctl() */

/**
@@ -791,7 +791,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
* @tty - pointer to tty instance data
* @filp - pointer to open file object for device
* @poll_table - wait queue for operations
- *
+ *
* Determine which operations (read/write) will not block and return info
* to caller.
* Returns a bit mask containing info on which ops will not block.
@@ -802,9 +802,9 @@ static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
__poll_t mask = 0;

- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
-
+
if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
/* queue current process into any wait queue that */
/* may awaken in the future (read and write) */
@@ -855,25 +855,25 @@ static struct n_hdlc *n_hdlc_alloc(void)
buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
if (buf)
n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
- else if (debuglevel >= DEBUG_LEVEL_INFO)
+ else if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
}
-
+
/* allocate free tx buffer list */
for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
if (buf)
n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
- else if (debuglevel >= DEBUG_LEVEL_INFO)
+ else if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
}
-
+
/* Initialize the control block */
n_hdlc->magic = HDLC_MAGIC;
n_hdlc->flags = 0;
-
+
return n_hdlc;
-
+
} /* end of n_hdlc_alloc() */

/**
@@ -915,7 +915,7 @@ static void n_hdlc_buf_put(struct n_hdlc_buf_list *buf_list,
/**
* n_hdlc_buf_get - remove and return an HDLC buffer from list
* @buf_list - pointer to HDLC buffer list
- *
+ *
* Remove and return an HDLC buffer from the head of the specified HDLC buffer
* list.
* Returns a pointer to HDLC buffer if available, otherwise %NULL.
@@ -964,7 +964,7 @@ static int __init n_hdlc_init(void)
printk(hdlc_register_fail, status);

return status;
-
+
} /* end of init_module() */

static const char hdlc_unregister_ok[] __exitdata =
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index dbf1ab36758e..84f4f4f9b7c1 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -2,7 +2,7 @@
/* r3964 linediscipline for linux
*
* -----------------------------------------------------------
- * Copyright by
+ * Copyright by
* Philips Automation Projects
* Kassel (Germany)
* -----------------------------------------------------------
@@ -1126,8 +1126,8 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
unsigned char *new_data;

TRACE_L("write request, %d characters", count);
-/*
- * Verify the pointers
+/*
+ * Verify the pointers
*/

if (!pInfo)
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index c123fdb7eed8..c01fc69b8944 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -3,7 +3,7 @@
* RocketPort device driver for Linux
*
* Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
- *
+ *
* Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
*/

@@ -14,14 +14,14 @@
* from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts
* are not used.
*
- * Critical data:
- * - rp_table[], accessed through passed "info" pointers, is a global (static) array of
- * serial port state information and the xmit_buf circular buffer. Protected by
+ * Critical data:
+ * - rp_table[], accessed through passed "info" pointers, is a global (static) array of
+ * serial port state information and the xmit_buf circular buffer. Protected by
* a per port spinlock.
* - xmit_flags[], an array of ints indexed by line (port) number, indicating that there
* is data to be transmitted. Protected by atomic bit operations.
* - rp_num_ports, int indicating number of open ports, protected by atomic operations.
- *
+ *
* rp_write() and rp_write_char() functions use a per port semaphore to protect against
* simultaneous access to the same port by more than one process.
*/
@@ -90,7 +90,7 @@ static void rp_do_poll(struct timer_list *unused);

static struct tty_driver *rocket_driver;

-static struct rocket_version driver_version = {
+static struct rocket_version driver_version = {
ROCKET_VERSION, ROCKET_DATE
};

@@ -205,8 +205,8 @@ static Byte_t sBitMapSetTbl[8] = {
static int sClockPrescale = 0x14;

/*
- * Line number is the ttySIx number (x), the Minor number. We
- * assign them sequentially, starting at zero. The following
+ * Line number is the ttySIx number (x), the Minor number. We
+ * assign them sequentially, starting at zero. The following
* array keeps track of the line number assigned to a given board/aiop/channel.
*/
static unsigned char lineNumbers[MAX_RP_PORTS];
@@ -294,9 +294,9 @@ static inline int rocket_paranoia_check(struct r_port *info,
}


-/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals
- * that receive data is present on a serial port. Pulls data from FIFO, moves it into the
- * tty layer.
+/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals
+ * that receive data is present on a serial port. Pulls data from FIFO, moves it into the
+ * tty layer.
*/
static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
unsigned int ChanStatus)
@@ -327,7 +327,7 @@ static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
}
}

- /*
+ /*
* if we previously entered status mode, then read down the
* FIFO one word at a time, pulling apart the character and
* the status. Update error counters depending on status
@@ -402,9 +402,9 @@ static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
}

/*
- * Serial port transmit data function. Called from the timer polling loop as a
+ * Serial port transmit data function. Called from the timer polling loop as a
* result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
- * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is
+ * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is
* moved to the port's xmit FIFO. *info is critical data, protected by spinlocks.
*/
static void rp_do_transmit(struct r_port *info)
@@ -472,7 +472,7 @@ static void rp_do_transmit(struct r_port *info)
/*
* Called when a serial port signals it has read data in it's RX FIFO.
* It checks what interrupts are pending and services them, including
- * receiving serial data.
+ * receiving serial data.
*/
static void rp_handle_port(struct r_port *info)
{
@@ -574,8 +574,8 @@ static void rp_do_poll(struct timer_list *unused)

/*
* xmit_flags contains bit-significant flags, indicating there is data
- * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
- * 1, ... (32 total possible). The variable i has the aiop and ch
+ * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
+ * 1, ... (32 total possible). The variable i has the aiop and ch
* numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
*/
if (xmitmask) {
@@ -598,8 +598,8 @@ static void rp_do_poll(struct timer_list *unused)
}

/*
- * Initializes the r_port structure for a port, as well as enabling the port on
- * the board.
+ * Initializes the r_port structure for a port, as well as enabling the port on
+ * the board.
* Inputs: board, aiop, chan numbers
*/
static void __init
@@ -686,7 +686,7 @@ init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
}

/*
- * Configures a rocketport port according to its termio settings. Called from
+ * Configures a rocketport port according to its termio settings. Called from
* user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
*/
static void configure_r_port(struct tty_struct *tty, struct r_port *info,
@@ -862,8 +862,8 @@ static void dtr_rts(struct tty_port *port, int on)
}

/*
- * Exception handler that opens a serial port. Creates xmit_buf storage, fills in
- * port's r_port struct. Initializes the port hardware.
+ * Exception handler that opens a serial port. Creates xmit_buf storage, fills in
+ * port's r_port struct. Initializes the port hardware.
*/
static int rp_open(struct tty_struct *tty, struct file *filp)
{
@@ -877,7 +877,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
if (info == NULL)
return -ENXIO;
port = &info->port;
-
+
page = __get_free_page(GFP_KERNEL);
if (!page)
return -ENOMEM;
@@ -962,7 +962,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
struct tty_port *port = &info->port;
int timeout;
CHANNEL_t *cp;
-
+
if (rocket_paranoia_check(info, "rp_close"))
return;

@@ -998,7 +998,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
sClrDTR(cp);

rp_flush_buffer(tty);
-
+
tty_ldisc_flush(tty);

clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
@@ -1119,7 +1119,7 @@ static int sGetChanRI(CHANNEL_T * ChP)
/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */

/*
- * Returns the state of the serial modem control lines. These next 2 functions
+ * Returns the state of the serial modem control lines. These next 2 functions
* are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
*/
static int rp_tiocmget(struct tty_struct *tty)
@@ -1129,7 +1129,7 @@ static int rp_tiocmget(struct tty_struct *tty)

ChanStatus = sGetChanStatusLo(&info->channel);
control = info->channel.TxControl[3];
- result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
+ result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
((control & SET_DTR) ? TIOCM_DTR : 0) |
((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
(sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
@@ -1139,7 +1139,7 @@ static int rp_tiocmget(struct tty_struct *tty)
return result;
}

-/*
+/*
* Sets the modem control lines
*/
static int rp_tiocmset(struct tty_struct *tty,
@@ -1537,7 +1537,7 @@ static int rp_put_char(struct tty_struct *tty, unsigned char ch)
* Exception handler - write routine, called when user app writes to the device.
* A per port write mutex is used to protect from another process writing to
* this port at the same time. This other process could be running on the other CPU
- * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
+ * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
* Spinlocks protect the info xmit members.
*/
static int rp_write(struct tty_struct *tty,
@@ -1564,7 +1564,7 @@ static int rp_write(struct tty_struct *tty,
info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);

/*
- * If the write queue for the port is empty, and there is FIFO space, stuff bytes
+ * If the write queue for the port is empty, and there is FIFO space, stuff bytes
* into FIFO. Use the write queue for temp storage.
*/
if (!tty->stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
@@ -1617,7 +1617,7 @@ static int rp_write(struct tty_struct *tty,

if ((retval > 0) && !tty->stopped)
set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
-
+
end:
if (info->xmit_cnt < WAKEUP_CHARS) {
tty_wakeup(tty);
@@ -2285,7 +2285,7 @@ static int __init init_ISA(int i)
rocketModel[i].numPorts = total_num_chan;
rocketModel[i].model = MODEL_ISA;

- printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
+ printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
i, rcktpt_io_addr[i], num_aiops, type_string);

printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
@@ -2339,7 +2339,7 @@ static int __init rp_init(void)
goto err;

/*
- * If board 1 is non-zero, there is at least one ISA configured. If controller is
+ * If board 1 is non-zero, there is at least one ISA configured. If controller is
* zero, use the default controller IO address of board1 + 0x40.
*/
if (board1) {
@@ -3104,8 +3104,8 @@ static unsigned char GetLineNumber(int ctrl, int aiop, int ch)

/*
* Stores the line number associated with a given controller (board), aiop
- * and channel number.
- * Returns: The line number assigned
+ * and channel number.
+ * Returns: The line number assigned
*/
static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
{
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 32b3acf8150a..6176f5e8b228 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -227,7 +227,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
b = port->uartclk / (16 * quot);
tty_termios_encode_baud_rate(termios, b, b);
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 2c37d11726ab..fa49f25a7fbc 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -390,7 +390,7 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
quot = uart_get_divisor(port, baud);

switch (termios->c_cflag & CSIZE) {
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 371569a0fd00..95090a6ad6c4 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -826,7 +826,7 @@ static int max3100_remove(struct spi_device *spi)
}

WARN_ON(i == MAX_MAX3100);
-
+
/* check if this is the last chip we have */
for (i = 0; i < MAX_MAX3100; i++)
if (max3100s[i]) {
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 3db48fcd6068..aae234b14be6 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -386,7 +386,7 @@ static int max14830_detect(struct device *dev)
MAX310X_EXTREG_ENBL);
if (ret)
return ret;
-
+
regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val);
regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL);
if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) {
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 880d1b3127c2..f7d67125675e 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -108,7 +108,7 @@ static int __init get_mux_port_count(struct parisc_device *dev)
static unsigned int mux_tx_empty(struct uart_port *port)
{
return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT;
-}
+}

/**
* mux_set_mctrl - Set the current state of the modem control inputs.
@@ -130,7 +130,7 @@ static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl)
* treated as permanently active.
*/
static unsigned int mux_get_mctrl(struct uart_port *port)
-{
+{
return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
}

@@ -209,7 +209,7 @@ static void mux_write(struct uart_port *port)

} while(--count > 0);

- while(UART_GET_FIFO_CNT(port))
+ while(UART_GET_FIFO_CNT(port))
udelay(1);

if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -254,7 +254,7 @@ static void mux_read(struct uart_port *port)

tty_insert_flip_char(tport, data & 0xFF, TTY_NORMAL);
}
-
+
if (start_count != port->icount.rx)
tty_flip_buffer_push(tport);
}
@@ -312,7 +312,7 @@ static const char *mux_type(struct uart_port *port)
/**
* mux_release_port - Release memory and IO regions.
* @port: Ptr to the uart_port.
- *
+ *
* Release any memory and IO region resources currently in use by
* the port.
*/
@@ -372,7 +372,7 @@ static int mux_verify_port(struct uart_port *port, struct serial_struct *ser)
* This function periodically polls the Serial MUX to check for new data.
*/
static void mux_poll(struct timer_list *unused)
-{
+{
int i;

for(i = 0; i < port_cnt; ++i) {
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index a5558051de74..5fcd34bbd0ce 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -2,7 +2,7 @@
/*
* Driver for PowerMac Z85c30 based ESCC cell found in the
* "macio" ASICs of various PowerMac models
- *
+ *
* Copyright (C) 2003 Ben. Herrenschmidt (benh@xxxxxxxxxxxxxxxxxxx)
*
* Derived from drivers/macintosh/macserial.c by Paul Mackerras
@@ -108,7 +108,7 @@ static struct uart_driver pmz_uart_reg = {
};


-/*
+/*
* Load all registers to reprogram the port
* This function must only be called when the TX is not busy. The UART
* port lock must be held and local interrupts disabled.
@@ -165,7 +165,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
/* Lower and upper byte of baud rate generator divisor. */
write_zsreg(uap, R12, regs[R12]);
write_zsreg(uap, R13, regs[R13]);
-
+
/* Now rewrite R14, with BRENAB (if set). */
write_zsreg(uap, R14, regs[R14]);

@@ -184,7 +184,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
write_zsreg(uap, R9, regs[R9]);
}

-/*
+/*
* We do like sunzilog to avoid disrupting pending Tx
* Reprogram the Zilog channel HW registers with the copies found in the
* software state struct. If the transmitter is busy, we defer this update
@@ -460,7 +460,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
goto skip_a;
}
write_zsreg(uap_a, R0, RES_H_IUS);
- zssync(uap_a);
+ zssync(uap_a);
if (r3 & CHAEXT)
pmz_status_handle(uap_a);
if (r3 & CHARxIP)
@@ -510,7 +510,7 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
{
unsigned long flags;
u8 status;
-
+
spin_lock_irqsave(&uap->port.lock, flags);
status = read_zsreg(uap, R0);
spin_unlock_irqrestore(&uap->port.lock, flags);
@@ -518,7 +518,7 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
return status;
}

-/*
+/*
* Check if transmitter is empty
* The port lock is not held.
*/
@@ -532,7 +532,7 @@ static unsigned int pmz_tx_empty(struct uart_port *port)
return 0;
}

-/*
+/*
* Set Modem Control (RTS & DTR) bits
* The port lock is held and interrupts are disabled.
* Note: Shall we really filter out RTS on external ports or
@@ -563,7 +563,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
else
clear_bits |= DTR;

- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
uap->curregs[R5] |= set_bits;
uap->curregs[R5] &= ~clear_bits;

@@ -573,7 +573,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
zssync(uap);
}

-/*
+/*
* Get Modem Control bits (only the input ones, the core will
* or that with a cached value of the control ones)
* The port lock is held and interrupts are disabled.
@@ -597,7 +597,7 @@ static unsigned int pmz_get_mctrl(struct uart_port *port)
return ret;
}

-/*
+/*
* Stop TX side. Dealt like sunzilog at next Tx interrupt,
* though for DMA, we will have to do a bit more.
* The port lock is held and interrupts are disabled.
@@ -607,7 +607,7 @@ static void pmz_stop_tx(struct uart_port *port)
to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED;
}

-/*
+/*
* Kick the Tx side.
* The port lock is held and interrupts are disabled.
*/
@@ -652,7 +652,7 @@ static void pmz_start_tx(struct uart_port *port)
pmz_debug("pmz: start_tx() done.\n");
}

-/*
+/*
* Stop Rx side, basically disable emitting of
* Rx interrupts on the port. We don't disable the rx
* side of the chip proper though
@@ -671,7 +671,7 @@ static void pmz_stop_rx(struct uart_port *port)
pmz_debug("pmz: stop_rx() done.\n");
}

-/*
+/*
* Enable modem status change interrupts
* The port lock is held.
*/
@@ -691,7 +691,7 @@ static void pmz_enable_ms(struct uart_port *port)
}
}

-/*
+/*
* Control break state emission
* The port lock is not held.
*/
@@ -924,7 +924,7 @@ static int pmz_startup(struct uart_port *port)
spin_lock_irqsave(&port->lock, flags);
pwr_delay = __pmz_startup(uap);
spin_unlock_irqrestore(&port->lock, flags);
- }
+ }
sprintf(uap->irq_name, PMACZILOG_NAME"%d", uap->port.line);
if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
uap->irq_name, uap)) {
@@ -1176,7 +1176,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
mdelay(1);

/* Switch SCC to 19200 */
- pmz_convert_to_zs(uap, CS8, 0, 19200);
+ pmz_convert_to_zs(uap, CS8, 0, 19200);
pmz_load_zsregs(uap, uap->curregs);
mdelay(1);

@@ -1284,7 +1284,7 @@ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
struct uart_pmac_port *uap = to_pmz(port);
unsigned long flags;

- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);

/* Disable IRQs on the port */
pmz_interrupt_control(uap, 0);
@@ -1415,7 +1415,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)

uap->control_reg = uap->port.membase;
uap->data_reg = uap->control_reg + 0x10;
-
+
/*
* Request & map DBDMA registers
*/
@@ -1426,15 +1426,15 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
#else
memset(&r_txdma, 0, sizeof(struct resource));
memset(&r_rxdma, 0, sizeof(struct resource));
-#endif
+#endif
if (ZS_HAS_DMA(uap)) {
uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
- if (uap->tx_dma_regs == NULL) {
+ if (uap->tx_dma_regs == NULL) {
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
goto no_dma;
}
uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
- if (uap->rx_dma_regs == NULL) {
+ if (uap->rx_dma_regs == NULL) {
iounmap(uap->tx_dma_regs);
uap->tx_dma_regs = NULL;
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
@@ -1545,7 +1545,7 @@ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
struct uart_pmac_port *uap;
int i;
-
+
/* Iterate the pmz_ports array to find a matching entry
*/
for (i = 0; i < MAX_ZS_PORTS; i++)
@@ -1580,7 +1580,7 @@ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
static int pmz_detach(struct macio_dev *mdev)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
-
+
if (!uap)
return -ENODEV;

@@ -1593,7 +1593,7 @@ static int pmz_detach(struct macio_dev *mdev)
dev_set_drvdata(&mdev->ofdev.dev, NULL);
uap->dev = NULL;
uap->port.dev = NULL;
-
+
return 0;
}

@@ -1643,7 +1643,7 @@ static int __init pmz_probe(void)
for_each_node_by_name(node_p, "escc") {
/*
* First get channel A/B node pointers
- *
+ *
* TODO: Add routines with proper locking to do that...
*/
node_a = node_b = NULL;
@@ -1871,7 +1871,7 @@ static int __init init_pmz(void)
int rc, i;
printk(KERN_INFO "%s\n", version);

- /*
+ /*
* First, we need to do a direct OF-based probe pass. We
* do that because we want serial console up before the
* macio stuffs calls us back, and since that makes it
@@ -1892,7 +1892,7 @@ static int __init init_pmz(void)
*/
rc = pmz_register();
if (rc) {
- printk(KERN_ERR
+ printk(KERN_ERR
"pmac_zilog: Error registering serial device, disabling pmac_zilog.\n"
"pmac_zilog: Did another serial driver already claim the minors?\n");
/* effectively "pmz_unprobe()" */
@@ -2027,7 +2027,7 @@ static int __init pmz_console_setup(struct console *co, char *options)
pwr_delay = __pmz_startup(uap);
if (pwr_delay)
mdelay(pwr_delay);
-
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);

diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index a399772be3fc..ef20d42c321c 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -436,7 +436,7 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);

spin_lock_irqsave(&sport->port.lock, flags);
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 7744ed852d52..680df0e62bda 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -447,7 +447,7 @@ static void sunsab_start_tx(struct uart_port *port)

up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
writeb(up->interrupt_mask1, &up->regs->w.imr1);
-
+
if (!test_bit(SAB82532_XPR, &up->irqflags))
return;

@@ -554,7 +554,7 @@ static int sunsab_startup(struct uart_port *port)
(void) readb(&up->regs->r.isr1);

/*
- * Now, initialize the UART
+ * Now, initialize the UART
*/
writeb(0, &up->regs->w.ccr0); /* power-down */
writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
@@ -568,7 +568,7 @@ static int sunsab_startup(struct uart_port *port)
SAB82532_MODE_RAC);
writeb(up->cached_mode, &up->regs->w.mode);
writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
-
+
tmp = readb(&up->regs->rw.ccr0);
tmp |= SAB82532_CCR0_PU; /* power-up */
writeb(tmp, &up->regs->rw.ccr0);
@@ -612,7 +612,7 @@ static void sunsab_shutdown(struct uart_port *port)
up->cached_dafo &= ~SAB82532_DAFO_XBRK;
writeb(up->cached_dafo, &up->regs->rw.dafo);

- /* Disable Receiver */
+ /* Disable Receiver */
up->cached_mode &= ~SAB82532_MODE_RAC;
writeb(up->cached_mode, &up->regs->rw.mode);

@@ -627,7 +627,7 @@ static void sunsab_shutdown(struct uart_port *port)
* speed the chip was configured for when the port was open).
*/
#if 0
- /* Power Down */
+ /* Power Down */
tmp = readb(&up->regs->rw.ccr0);
tmp &= ~SAB82532_CCR0_PU;
writeb(tmp, &up->regs->rw.ccr0);
@@ -797,7 +797,7 @@ static const char *sunsab_type(struct uart_port *port)
{
struct uart_sunsab_port *up = (void *)port;
static char buf[36];
-
+
sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
return buf;
}
@@ -942,7 +942,7 @@ static int sunsab_console_setup(struct console *con, char *options)
sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);

spin_unlock_irqrestore(&up->port.lock, flags);
-
+
return 0;
}

diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 1a371c37a644..a2b9b963d521 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -913,7 +913,7 @@ sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);

sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
@@ -1079,7 +1079,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up)
save_mcr = serial_in(up, UART_MCR);
save_lcr = serial_in(up, UART_LCR);

- /*
+ /*
* Check to see if a UART is really there. Certain broken
* internal modems based on the Rockwell chipset fail this
* test, because they apparently don't implement the loopback
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index cb0dbff46db0..801856a2c2db 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -228,7 +228,7 @@ static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *r
/* Lower and upper byte of baud rate generator divisor. */
write_zsreg(channel, R12, regs[R12]);
write_zsreg(channel, R13, regs[R13]);
-
+
/* Now rewrite R14, with BRENAB (if set). */
write_zsreg(channel, R14, regs[R14]);

@@ -661,7 +661,7 @@ static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
else
clear_bits |= DTR;

- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
up->curregs[R5] |= set_bits;
up->curregs[R5] &= ~clear_bits;
write_zsreg(channel, R5, up->curregs[R5]);
@@ -749,7 +749,7 @@ static void sunzilog_enable_ms(struct uart_port *port)
if (new_reg != up->curregs[R15]) {
up->curregs[R15] = new_reg;

- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN);
}
}
@@ -776,7 +776,7 @@ static void sunzilog_break_ctl(struct uart_port *port, int break_state)
if (new_reg != up->curregs[R5]) {
up->curregs[R5] = new_reg;

- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(channel, R5, up->curregs[R5]);
}

diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index fbdf4d01c6a9..1dec82fae106 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -21,7 +21,7 @@
* contains exactly one complete HDLC frame. Calling mgsl_put_char
* will start assembling an HDLC frame that will not be sent until
* mgsl_flush_chars or mgsl_write is called.
- *
+ *
* Synchronous receive data is reported as complete frames. To accomplish
* this, the TTY flip buffer is bypassed (too small to hold largest
* frame and may fragment frames) and the line discipline
@@ -153,7 +153,7 @@ typedef struct _DMABUFFERENTRY
#define IO_PIN_SHUTDOWN_LIMIT 100

struct _input_signal_events {
- int ri_up;
+ int ri_up;
int ri_down;
int dsr_up;
int dsr_down;
@@ -174,29 +174,29 @@ struct tx_holding_buffer {
/*
* Device instance data structure
*/
-
+
struct mgsl_struct {
int magic;
struct tty_port port;
int line;
int hw_version;
-
+
struct mgsl_icount icount;
-
+
int timeout;
int x_char; /* xon/xoff character */
u16 read_status_mask;
- u16 ignore_status_mask;
+ u16 ignore_status_mask;
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
-
+
wait_queue_head_t status_event_wait_q;
wait_queue_head_t event_wait_q;
struct timer_list tx_timer; /* HDLC transmit timeout timer */
struct mgsl_struct *next_device; /* device list link */
-
+
spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
struct work_struct task; /* task structure for scheduling bh */

@@ -210,7 +210,7 @@ struct mgsl_struct {
bool bh_running; /* Protection from multiple */
int isr_overflow;
bool bh_requested;
-
+
int dcd_chkcount; /* check counts to prevent */
int cts_chkcount; /* too many IRQs if a signal */
int dsr_chkcount; /* is floating */
@@ -230,7 +230,7 @@ struct mgsl_struct {
DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
int current_tx_buffer; /* next tx dma buffer to be loaded */
-
+
unsigned char *intermediate_rxbuffer;

int num_tx_holding_buffers; /* number of tx holding buffer allocated */
@@ -259,11 +259,11 @@ struct mgsl_struct {
unsigned int io_base; /* base I/O address of adapter */
unsigned int io_addr_size; /* size of the I/O address range */
bool io_addr_requested; /* true if I/O address requested */
-
+
unsigned int irq_level; /* interrupt level */
unsigned long irq_flags;
bool irq_requested; /* true if IRQ requested */
-
+
unsigned int dma_level; /* DMA channel */
bool dma_requested; /* true if dma channel requested */

@@ -295,7 +295,7 @@ struct mgsl_struct {

bool loopmode_insert_requested;
bool loopmode_send_done_requested;
-
+
struct _input_signal_events input_signal_events;

/* generic HDLC device parts */
@@ -376,7 +376,7 @@ struct mgsl_struct {
#define DCR 0x06 /* DMA Control Register (shared) */
#define DACR 0x08 /* DMA Array count Register (shared) */
#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
-#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
+#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
#define DICR 0x18 /* DMA Interrupt Control Register (shared) */
#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
@@ -486,7 +486,7 @@ struct mgsl_struct {
/*
* Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
*/
-
+
#define RECEIVE_STATUS BIT5
#define RECEIVE_DATA BIT4
#define TRANSMIT_STATUS BIT3
@@ -516,7 +516,7 @@ struct mgsl_struct {
#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )

/*
- * Values for setting transmit idle mode in
+ * Values for setting transmit idle mode in
* Transmit Control/status Register (TCSR)
*/
#define IDLEMODE_FLAGS 0x0000
@@ -552,7 +552,7 @@ struct mgsl_struct {
#define TXSTATUS_FIFO_EMPTY BIT0
#define TXSTATUS_ALL 0x00fa
#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
-
+

#define MISCSTATUS_RXC_LATCHED BIT15
#define MISCSTATUS_RXC BIT14
@@ -865,7 +865,7 @@ static int debug_level;
static int maxframe[MAX_TOTAL_DEVICES];
static int txdmabufs[MAX_TOTAL_DEVICES];
static int txholdbufs[MAX_TOTAL_DEVICES];
-
+
module_param(break_on_load, bool, 0);
module_param(ttymajor, int, 0);
module_param_hw_array(io, int, ioport, NULL, 0);
@@ -967,7 +967,7 @@ static void ldisc_receive_buf(struct tty_struct *tty,
}

/* mgsl_stop() throttle (stop) transmitter
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -975,22 +975,22 @@ static void mgsl_stop(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
return;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("mgsl_stop(%s)\n",info->device_name);
-
+ printk("mgsl_stop(%s)\n",info->device_name);
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if (info->tx_enabled)
usc_stop_transmitter(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
} /* end of mgsl_stop() */

/* mgsl_start() release (start) transmitter
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -998,18 +998,18 @@ static void mgsl_start(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
return;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("mgsl_start(%s)\n",info->device_name);
-
+ printk("mgsl_start(%s)\n",info->device_name);
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if (!info->tx_enabled)
usc_start_transmitter(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
} /* end of mgsl_start() */

/*
@@ -1023,7 +1023,7 @@ static int mgsl_bh_action(struct mgsl_struct *info)
{
unsigned long flags;
int rc = 0;
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);

if (info->pending_bh & BH_RECEIVE) {
@@ -1042,9 +1042,9 @@ static int mgsl_bh_action(struct mgsl_struct *info)
info->bh_running = false;
info->bh_requested = false;
}
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
return rc;
}

@@ -1060,18 +1060,18 @@ static void mgsl_bh_handler(struct work_struct *work)
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
__FILE__,__LINE__,info->device_name);
-
+
info->bh_running = true;

while((action = mgsl_bh_action(info)) != 0) {
-
+
/* Process work item */
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
__FILE__,__LINE__,action);

switch (action) {
-
+
case BH_RECEIVE:
mgsl_bh_receive(info);
break;
@@ -1101,7 +1101,7 @@ static void mgsl_bh_receive(struct mgsl_struct *info)
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_receive(%s)\n",
__FILE__,__LINE__,info->device_name);
-
+
do
{
if (info->rx_rcc_underrun) {
@@ -1118,7 +1118,7 @@ static void mgsl_bh_transmit(struct mgsl_struct *info)
{
struct tty_struct *tty = info->port.tty;
unsigned long flags;
-
+
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
__FILE__,__LINE__,info->device_name);
@@ -1148,7 +1148,7 @@ static void mgsl_bh_status(struct mgsl_struct *info)
}

/* mgsl_isr_receive_status()
- *
+ *
* Service a receive status interrupt. The type of status
* interrupt is indicated by the state of the RCSR.
* This is only used for HDLC mode.
@@ -1163,18 +1163,18 @@ static void mgsl_isr_receive_status( struct mgsl_struct *info )
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
__FILE__,__LINE__,status);
-
- if ( (status & RXSTATUS_ABORT_RECEIVED) &&
+
+ if ( (status & RXSTATUS_ABORT_RECEIVED) &&
info->loopmode_insert_requested &&
usc_loopmode_active(info) )
{
++info->icount.rxabort;
info->loopmode_insert_requested = false;
-
+
/* clear CMR:13 to start echoing RxD to TxD */
info->cmr_value &= ~BIT13;
usc_OutReg(info, CMR, info->cmr_value);
-
+
/* disable received abort irq (no longer required) */
usc_OutReg(info, RICR,
(usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
@@ -1199,12 +1199,12 @@ static void mgsl_isr_receive_status( struct mgsl_struct *info )
} /* end of mgsl_isr_receive_status() */

/* mgsl_isr_transmit_status()
- *
+ *
* Service a transmit status interrupt
* HDLC mode :end of transmit frame
* Async mode:all data is sent
* transmit status is indicated by bits in the TCSR.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -1212,13 +1212,13 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
{
u16 status = usc_InReg( info, TCSR );

- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
__FILE__,__LINE__,status);
-
+
usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
usc_UnlatchTxstatusBits( info, status );
-
+
if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
{
/* finished sending HDLC abort. This may leave */
@@ -1229,7 +1229,7 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
usc_DmaCmd( info, DmaCmd_ResetTxChannel );
usc_RTCmd( info, RTCmd_PurgeTxFifo );
}
-
+
if ( status & TXSTATUS_EOF_SENT )
info->icount.txok++;
else if ( status & TXSTATUS_UNDERRUN )
@@ -1238,11 +1238,11 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
info->icount.txabort++;
else
info->icount.txunder++;
-
+
info->tx_active = false;
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- del_timer(&info->tx_timer);
-
+ del_timer(&info->tx_timer);
+
if ( info->drop_rts_on_tx_done ) {
usc_get_serial_signals( info );
if ( info->serial_signals & SerialSignal_RTS ) {
@@ -1255,7 +1255,7 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
- else
+ else
#endif
{
if (info->port.tty->stopped || info->port.tty->hw_stopped) {
@@ -1268,10 +1268,10 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
} /* end of mgsl_isr_transmit_status() */

/* mgsl_isr_io_pin()
- *
+ *
* Service an Input/Output pin interrupt. The type of
* interrupt is indicated by bits in the MISR
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -1280,10 +1280,10 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
struct mgsl_icount *icount;
u16 status = usc_InReg( info, MISR );

- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
__FILE__,__LINE__,status);
-
+
usc_ClearIrqPendingBits( info, IO_PIN );
usc_UnlatchIostatusBits( info, status );

@@ -1296,9 +1296,9 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
usc_DisablestatusIrqs(info,SICR_RI);
icount->rng++;
if ( status & MISCSTATUS_RI )
- info->input_signal_events.ri_up++;
+ info->input_signal_events.ri_up++;
else
- info->input_signal_events.ri_down++;
+ info->input_signal_events.ri_down++;
}
if (status & MISCSTATUS_DSR_LATCHED) {
if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
@@ -1353,7 +1353,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
tty_hangup(info->port.tty);
}
}
-
+
if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if (info->port.tty->hw_stopped) {
@@ -1378,7 +1378,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
}

info->pending_bh |= BH_STATUS;
-
+
/* for diagnostics set IRQ flag */
if ( status & MISCSTATUS_TXC_LATCHED ){
usc_OutReg( info, SICR,
@@ -1390,41 +1390,41 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
} /* end of mgsl_isr_io_pin() */

/* mgsl_isr_transmit_data()
- *
+ *
* Service a transmit data interrupt (async mode only).
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
static void mgsl_isr_transmit_data( struct mgsl_struct *info )
{
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
__FILE__,__LINE__,info->xmit_cnt);
-
+
usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
-
+
if (info->port.tty->stopped || info->port.tty->hw_stopped) {
usc_stop_transmitter(info);
return;
}
-
+
if ( info->xmit_cnt )
usc_load_txfifo( info );
else
info->tx_active = false;
-
+
if (info->xmit_cnt < WAKEUP_CHARS)
info->pending_bh |= BH_TRANSMIT;

} /* end of mgsl_isr_transmit_data() */

/* mgsl_isr_receive_data()
- *
+ *
* Service a receive data interrupt. This occurs
* when operating in asynchronous interrupt transfer mode.
- * The receive data FIFO is flushed to the receive data buffers.
- *
+ * The receive data FIFO is flushed to the receive data buffers.
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -1435,13 +1435,13 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
int work = 0;
unsigned char DataByte;
struct mgsl_icount *icount = &info->icount;
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_receive_data\n",
__FILE__,__LINE__);

usc_ClearIrqPendingBits( info, RECEIVE_DATA );
-
+
/* select FIFO status for RICR readback */
usc_RCmd( info, RCmd_SelectRicrRxFifostatus );

@@ -1464,9 +1464,9 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) )
usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
-
+
icount->rx++;
-
+
flag = 0;
if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) {
@@ -1489,9 +1489,9 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
/* discard char if tty control flags say so */
if (status & info->ignore_status_mask)
continue;
-
+
status &= info->read_status_mask;
-
+
if (status & RXSTATUS_BREAK_RECEIVED) {
flag = TTY_BREAK;
if (info->port.flags & ASYNC_SAK)
@@ -1516,15 +1516,15 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
__FILE__,__LINE__,icount->rx,icount->brk,
icount->parity,icount->frame,icount->overrun);
}
-
+
if(work)
tty_flip_buffer_push(&info->port);
}

/* mgsl_isr_misc()
- *
+ *
* Service a miscellaneous interrupt source.
- *
+ *
* Arguments: info pointer to device extension (instance data)
* Return Value: None
*/
@@ -1532,10 +1532,10 @@ static void mgsl_isr_misc( struct mgsl_struct *info )
{
u16 status = usc_InReg( info, MISR );

- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_misc status=%04X\n",
__FILE__,__LINE__,status);
-
+
if ((status & MISCSTATUS_RCC_UNDERRUN) &&
(info->params.mode == MGSL_MODE_HDLC)) {

@@ -1560,7 +1560,7 @@ static void mgsl_isr_misc( struct mgsl_struct *info )
*
* Services undefined interrupt vectors from the
* USC. (hence this function SHOULD never be called)
- *
+ *
* Arguments: info pointer to device extension (instance data)
* Return Value: None
*/
@@ -1570,28 +1570,28 @@ static void mgsl_isr_null( struct mgsl_struct *info )
} /* end of mgsl_isr_null() */

/* mgsl_isr_receive_dma()
- *
+ *
* Service a receive DMA channel interrupt.
* For this driver there are two sources of receive DMA interrupts
* as identified in the Receive DMA mode Register (RDMR):
- *
+ *
* BIT3 EOA/EOL End of List, all receive buffers in receive
* buffer list have been filled (no more free buffers
* available). The DMA controller has shut down.
- *
+ *
* BIT2 EOB End of Buffer. This interrupt occurs when a receive
* DMA buffer is terminated in response to completion
* of a good frame or a frame with errors. The status
* of the frame is stored in the buffer entry in the
* list of receive buffer entries.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
static void mgsl_isr_receive_dma( struct mgsl_struct *info )
{
u16 status;
-
+
/* clear interrupt pending and IUS bit for Rx DMA IRQ */
usc_OutDmaReg( info, CDIR, BIT9 | BIT1 );

@@ -1599,12 +1599,12 @@ static void mgsl_isr_receive_dma( struct mgsl_struct *info )
/* This also clears the status bits. */
status = usc_InDmaReg( info, RDMR );

- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
__FILE__,__LINE__,info->device_name,status);
-
+
info->pending_bh |= BH_RECEIVE;
-
+
if ( status & BIT3 ) {
info->rx_overflow = true;
info->icount.buf_overrun++;
@@ -1665,14 +1665,14 @@ static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
} /* end of mgsl_isr_transmit_dma() */

/* mgsl_interrupt()
- *
+ *
* Interrupt service routine entry point.
- *
+ *
* Arguments:
- *
+ *
* irq interrupt number that caused interrupt
* dev_id device ID supplied during interrupt registration
- *
+ *
* Return Value: None
*/
static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
@@ -1681,7 +1681,7 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
u16 UscVector;
u16 DmaVector;

- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
__FILE__, __LINE__, info->irq_level);

@@ -1691,14 +1691,14 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
/* Read the interrupt vectors from hardware. */
UscVector = usc_InReg(info, IVR) >> 9;
DmaVector = usc_InDmaReg(info, DIVR);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
__FILE__,__LINE__,info->device_name,UscVector,DmaVector);
-
+
if ( !UscVector && !DmaVector )
break;
-
+
/* Dispatch interrupt vector */
if ( UscVector )
(*UscIsrTable[UscVector])(info);
@@ -1715,13 +1715,13 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
break;
}
}
-
- /* Request bottom half processing if there's something
+
+ /* Request bottom half processing if there's something
* for it to do and the bh is not already running
*/

if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):%s queueing bh task.\n",
__FILE__,__LINE__,info->device_name);
schedule_work(&info->task);
@@ -1729,8 +1729,8 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
}

spin_unlock(&info->irq_spinlock);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
__FILE__, __LINE__, info->irq_level);

@@ -1738,9 +1738,9 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
} /* end of mgsl_interrupt() */

/* startup()
- *
+ *
* Initialize and start device.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise error code
*/
@@ -1765,18 +1765,18 @@ static int startup(struct mgsl_struct * info)
}

info->pending_bh = 0;
-
+
memset(&info->icount, 0, sizeof(info->icount));

timer_setup(&info->tx_timer, mgsl_tx_timeout, 0);
-
+
/* Allocate and claim adapter resources */
retval = mgsl_claim_resources(info);
-
+
/* perform existence check and diagnostics */
if ( !retval )
retval = mgsl_adapter_test(info);
-
+
if ( retval ) {
if (capable(CAP_SYS_ADMIN) && info->port.tty)
set_bit(TTY_IO_ERROR, &info->port.tty->flags);
@@ -1863,20 +1863,20 @@ static void mgsl_program_hw(struct mgsl_struct *info)
unsigned long flags;

spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
usc_stop_receiver(info);
usc_stop_transmitter(info);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
+
if (info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ||
info->netcount)
usc_set_sync_mode(info);
else
usc_set_async_mode(info);
-
+
usc_set_serial_signals(info);
-
+
info->dcd_chkcount = 0;
info->cts_chkcount = 0;
info->ri_chkcount = 0;
@@ -1885,10 +1885,10 @@ static void mgsl_program_hw(struct mgsl_struct *info)
usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
usc_EnableInterrupts(info, IO_PIN);
usc_get_serial_signals(info);
-
+
if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
usc_start_receiver(info);
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}

@@ -1901,11 +1901,11 @@ static void mgsl_change_params(struct mgsl_struct *info)

if (!info->port.tty)
return;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
cflag = info->port.tty->termios.c_cflag;

/* if B0 rate (hangup) specified then negate RTS and DTR */
@@ -1914,9 +1914,9 @@ static void mgsl_change_params(struct mgsl_struct *info)
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-
+
/* byte size and parity */
-
+
switch (cflag & CSIZE) {
case CS5: info->params.data_bits = 5; break;
case CS6: info->params.data_bits = 6; break;
@@ -1925,7 +1925,7 @@ static void mgsl_change_params(struct mgsl_struct *info)
/* Never happens, but GCC is too dumb to figure it out */
default: info->params.data_bits = 7; break;
}
-
+
if (cflag & CSTOPB)
info->params.stop_bits = 2;
else
@@ -1946,7 +1946,7 @@ static void mgsl_change_params(struct mgsl_struct *info)
/* calculate number of jiffies to transmit a full
* FIFO (32 bytes) at specified data rate
*/
- bits_per_char = info->params.data_bits +
+ bits_per_char = info->params.data_bits +
info->params.stop_bits + 1;

/* if port data rate is set to 460800 or less then
@@ -1955,9 +1955,9 @@ static void mgsl_change_params(struct mgsl_struct *info)
*/
if (info->params.data_rate <= 460800)
info->params.data_rate = tty_get_baud_rate(info->port.tty);
-
+
if ( info->params.data_rate ) {
- info->timeout = (32*HZ*bits_per_char) /
+ info->timeout = (32*HZ*bits_per_char) /
info->params.data_rate;
}
info->timeout += HZ/50; /* Add .02 seconds of slop */
@@ -1966,18 +1966,18 @@ static void mgsl_change_params(struct mgsl_struct *info)
tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);

/* process tty input control flags */
-
+
info->read_status_mask = RXSTATUS_OVERRUN;
if (I_INPCK(info->port.tty))
info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
-
+
if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
- /* If ignoring parity and break indicators, ignore
+ /* If ignoring parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(info->port.tty))
@@ -1989,12 +1989,12 @@ static void mgsl_change_params(struct mgsl_struct *info)
} /* end of mgsl_change_params() */

/* mgsl_put_char()
- *
+ *
* Add a character to the transmit buffer.
- *
+ *
* Arguments: tty pointer to tty information structure
* ch character to add to transmit buffer
- *
+ *
* Return Value: None
*/
static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
@@ -2006,8 +2006,8 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
if (debug_level >= DEBUG_LEVEL_INFO) {
printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
__FILE__, __LINE__, ch, info->device_name);
- }
-
+ }
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
return 0;

@@ -2015,7 +2015,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
return 0;

spin_lock_irqsave(&info->irq_spinlock, flags);
-
+
if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
info->xmit_buf[info->xmit_head++] = ch;
@@ -2026,14 +2026,14 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
}
spin_unlock_irqrestore(&info->irq_spinlock, flags);
return ret;
-
+
} /* end of mgsl_put_char() */

/* mgsl_flush_chars()
- *
+ *
* Enable transmitter so remaining characters in the
* transmit buffer are sent.
- *
+ *
* Arguments: tty pointer to tty information structure
* Return Value: None
*/
@@ -2041,11 +2041,11 @@ static void mgsl_flush_chars(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
__FILE__,__LINE__,info->device_name,info->xmit_cnt);
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
return;

@@ -2058,7 +2058,7 @@ static void mgsl_flush_chars(struct tty_struct *tty)
__FILE__,__LINE__,info->device_name );

spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
if (!info->tx_active) {
if ( (info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
@@ -2070,21 +2070,21 @@ static void mgsl_flush_chars(struct tty_struct *tty)
}
usc_start_transmitter(info);
}
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
} /* end of mgsl_flush_chars() */

/* mgsl_write()
- *
+ *
* Send a block of data
- *
+ *
* Arguments:
- *
+ *
* tty pointer to tty information structure
* buf pointer to buffer containing send data
* count size of send data in bytes
- *
+ *
* Return Value: number of characters written
*/
static int mgsl_write(struct tty_struct * tty,
@@ -2093,11 +2093,11 @@ static int mgsl_write(struct tty_struct * tty,
int c, ret = 0;
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_write(%s) count=%d\n",
__FILE__,__LINE__,info->device_name,count);
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
goto cleanup;

@@ -2136,7 +2136,7 @@ static int mgsl_write(struct tty_struct * tty,
spin_unlock_irqrestore(&info->irq_spinlock,flags);
goto cleanup;
}
-
+
/* if operating in HDLC LoopMode and the adapter */
/* has yet to be inserted into the loop, we can't */
/* transmit */
@@ -2152,7 +2152,7 @@ static int mgsl_write(struct tty_struct * tty,
/* Send accumulated from send_char() calls */
/* as frame and wait before accepting more data. */
ret = 0;
-
+
/* copy data from circular xmit_buf to */
/* transmit DMA buffer. */
mgsl_load_tx_dma_buffer(info,
@@ -2187,27 +2187,27 @@ static int mgsl_write(struct tty_struct * tty,
count -= c;
ret += c;
}
- }
-
+ }
+
if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
spin_lock_irqsave(&info->irq_spinlock,flags);
if (!info->tx_active)
usc_start_transmitter(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
-cleanup:
+cleanup:
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_write(%s) returning=%d\n",
__FILE__,__LINE__,info->device_name,ret);
-
+
return ret;
-
+
} /* end of mgsl_write() */

/* mgsl_write_room()
*
* Return the count of free bytes in transmit buffer
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -2215,17 +2215,17 @@ static int mgsl_write_room(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
int ret;
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
return 0;
ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
if (ret < 0)
ret = 0;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_write_room(%s)=%d\n",
__FILE__,__LINE__, info->device_name,ret );
-
+
if ( info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
/* operating in synchronous (frame oriented) mode */
@@ -2234,33 +2234,33 @@ static int mgsl_write_room(struct tty_struct *tty)
else
return HDLC_MAX_FRAME_SIZE;
}
-
+
return ret;
-
+
} /* end of mgsl_write_room() */

/* mgsl_chars_in_buffer()
*
* Return the count of bytes in transmit buffer
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
static int mgsl_chars_in_buffer(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
return 0;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
__FILE__,__LINE__, info->device_name,info->xmit_cnt );
-
+
if ( info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
/* operating in synchronous (frame oriented) mode */
@@ -2269,14 +2269,14 @@ static int mgsl_chars_in_buffer(struct tty_struct *tty)
else
return 0;
}
-
+
return info->xmit_cnt;
} /* end of mgsl_chars_in_buffer() */

/* mgsl_flush_buffer()
*
* Discard all data in the send buffer
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -2284,26 +2284,26 @@ static void mgsl_flush_buffer(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
__FILE__,__LINE__, info->device_name );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
return;
-
- spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- del_timer(&info->tx_timer);
+ del_timer(&info->tx_timer);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
tty_wakeup(tty);
}

/* mgsl_send_xchar()
*
* Send a high-priority XON/XOFF character
- *
+ *
* Arguments: tty pointer to tty info structure
* ch character to send
* Return Value: None
@@ -2316,7 +2316,7 @@ static void mgsl_send_xchar(struct tty_struct *tty, char ch)
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
__FILE__,__LINE__, info->device_name, ch );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
return;

@@ -2331,9 +2331,9 @@ static void mgsl_send_xchar(struct tty_struct *tty, char ch)
} /* end of mgsl_send_xchar() */

/* mgsl_throttle()
- *
+ *
* Signal remote device to throttle send data (our receive data)
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -2341,14 +2341,14 @@ static void mgsl_throttle(struct tty_struct * tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_throttle(%s) entry\n",
__FILE__,__LINE__, info->device_name );

if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
return;
-
+
if (I_IXOFF(tty))
mgsl_send_xchar(tty, STOP_CHAR(tty));

@@ -2361,9 +2361,9 @@ static void mgsl_throttle(struct tty_struct * tty)
} /* end of mgsl_throttle() */

/* mgsl_unthrottle()
- *
+ *
* Signal remote device to stop throttling send data (our receive data)
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -2371,14 +2371,14 @@ static void mgsl_unthrottle(struct tty_struct * tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_unthrottle(%s) entry\n",
__FILE__,__LINE__, info->device_name );

if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
return;
-
+
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
@@ -2392,26 +2392,26 @@ static void mgsl_unthrottle(struct tty_struct * tty)
usc_set_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
-
+
} /* end of mgsl_unthrottle() */

/* mgsl_get_stats()
- *
+ *
* get the current serial parameters information
*
* Arguments: info pointer to device instance data
* user_icount pointer to buffer to hold returned stats
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
{
int err;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_get_params(%s)\n",
__FILE__,__LINE__, info->device_name);
-
+
if (!user_icount) {
memset(&info->icount, 0, sizeof(info->icount));
} else {
@@ -2421,18 +2421,18 @@ static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *
if (err)
return -EFAULT;
}
-
+
return 0;
-
+
} /* end of mgsl_get_stats() */

/* mgsl_get_params()
- *
+ *
* get the current serial parameters information
*
* Arguments: info pointer to device instance data
* user_params pointer to buffer to hold returned params
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
@@ -2441,7 +2441,7 @@ static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_p
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_get_params(%s)\n",
__FILE__,__LINE__, info->device_name);
-
+
mutex_lock(&info->port.mutex);
COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
mutex_unlock(&info->port.mutex);
@@ -2451,17 +2451,17 @@ static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_p
__FILE__,__LINE__,info->device_name);
return -EFAULT;
}
-
+
return 0;
-
+
} /* end of mgsl_get_params() */

/* mgsl_set_params()
- *
+ *
* set the serial parameters
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* new_params user buffer containing new serial params
*
@@ -2472,7 +2472,7 @@ static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_pa
unsigned long flags;
MGSL_PARAMS tmp_params;
int err;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
info->device_name );
@@ -2483,36 +2483,36 @@ static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_pa
__FILE__,__LINE__,info->device_name);
return -EFAULT;
}
-
+
mutex_lock(&info->port.mutex);
spin_lock_irqsave(&info->irq_spinlock,flags);
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
mgsl_change_params(info);
mutex_unlock(&info->port.mutex);
-
+
return 0;
-
+
} /* end of mgsl_set_params() */

/* mgsl_get_txidle()
- *
+ *
* get the current transmit idle mode
*
* Arguments: info pointer to device instance data
* idle_mode pointer to buffer to hold returned idle mode
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
{
int err;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
__FILE__,__LINE__, info->device_name, info->idle_mode);
-
+
COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
if (err) {
if ( debug_level >= DEBUG_LEVEL_INFO )
@@ -2520,13 +2520,13 @@ static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
__FILE__,__LINE__,info->device_name);
return -EFAULT;
}
-
+
return 0;
-
+
} /* end of mgsl_get_txidle() */

/* mgsl_set_txidle() service ioctl to set transmit idle mode
- *
+ *
* Arguments: info pointer to device instance data
* idle_mode new idle mode
*
@@ -2535,25 +2535,25 @@ static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
{
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
info->device_name, idle_mode );
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
info->idle_mode = idle_mode;
usc_set_txidle( info );
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_set_txidle() */

/* mgsl_txenable()
- *
+ *
* enable or disable the transmitter
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* enable 1 = enable, 0 = disable
*
@@ -2562,11 +2562,11 @@ static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
static int mgsl_txenable(struct mgsl_struct * info, int enable)
{
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
info->device_name, enable);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if ( enable ) {
if ( !info->tx_enabled ) {
@@ -2588,22 +2588,22 @@ static int mgsl_txenable(struct mgsl_struct * info, int enable)
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_txenable() */

/* mgsl_txabort() abort send HDLC frame
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_txabort(struct mgsl_struct * info)
{
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
info->device_name);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
{
@@ -2614,11 +2614,11 @@ static int mgsl_txabort(struct mgsl_struct * info)
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_txabort() */

/* mgsl_rxenable() enable or disable the receiver
- *
+ *
* Arguments: info pointer to device instance data
* enable 1 = enable, 0 = disable
* Return Value: 0 if success, otherwise error code
@@ -2626,11 +2626,11 @@ static int mgsl_txabort(struct mgsl_struct * info)
static int mgsl_rxenable(struct mgsl_struct * info, int enable)
{
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
info->device_name, enable);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if ( enable ) {
if ( !info->rx_enabled )
@@ -2641,11 +2641,11 @@ static int mgsl_rxenable(struct mgsl_struct * info, int enable)
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_rxenable() */

/* mgsl_wait_event() wait for specified event to occur
- *
+ *
* Arguments: info pointer to device instance data
* mask pointer to bitmask of events to wait for
* Return Value: 0 if successful and bit mask updated with
@@ -2667,7 +2667,7 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
if (rc) {
return -EFAULT;
}
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
info->device_name, mask);
@@ -2690,7 +2690,7 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
/* save current irq counts */
cprev = info->icount;
oldsigs = info->input_signal_events;
-
+
/* enable hunt and idle irqs if needed */
if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
u16 oldreg = usc_InReg(info,RICR);
@@ -2700,12 +2700,12 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
if (oldreg != newreg)
usc_OutReg(info, RICR, newreg);
}
-
+
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&info->event_wait_q, &wait);
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+

for(;;) {
schedule();
@@ -2713,7 +2713,7 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
rc = -ERESTARTSYS;
break;
}
-
+
/* get current irq counts */
spin_lock_irqsave(&info->irq_spinlock,flags);
cnow = info->icount;
@@ -2749,11 +2749,11 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
(cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
if (events)
break;
-
+
cprev = cnow;
oldsigs = newsigs;
}
-
+
remove_wait_queue(&info->event_wait_q, &wait);
set_current_state(TASK_RUNNING);

@@ -2769,9 +2769,9 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
exit:
if ( rc == 0 )
PUT_USER(rc, events, mask_ptr);
-
+
return rc;
-
+
} /* end of mgsl_wait_event() */

static int modem_input_wait(struct mgsl_struct *info,int arg)
@@ -2887,22 +2887,22 @@ static int mgsl_break(struct tty_struct *tty, int break_state)
{
struct mgsl_struct * info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_break(%s,%d)\n",
__FILE__,__LINE__, info->device_name, break_state);
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
return -EINVAL;

spin_lock_irqsave(&info->irq_spinlock,flags);
if (break_state == -1)
usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
- else
+ else
usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_break() */

/*
@@ -2938,24 +2938,24 @@ static int msgl_get_icount(struct tty_struct *tty,
}

/* mgsl_ioctl() Service an IOCTL request
- *
+ *
* Arguments:
- *
+ *
* tty pointer to tty instance data
* cmd IOCTL command code
* arg command argument/context
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct mgsl_struct * info = tty->driver_data;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
info->device_name, cmd );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
return -ENODEV;

@@ -2971,7 +2971,7 @@ static int mgsl_ioctl(struct tty_struct *tty,
static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
-
+
switch (cmd) {
case MGSL_IOCGPARAMS:
return mgsl_get_params(info, argp);
@@ -3006,25 +3006,25 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne
}

/* mgsl_set_termios()
- *
+ *
* Set new termios settings
- *
+ *
* Arguments:
- *
+ *
* tty pointer to tty structure
* termios pointer to buffer to hold returned old termios
- *
+ *
* Return Value: None
*/
static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
tty->driver->name );
-
+
mgsl_change_params(info);

/* Handle transition to B0 status */
@@ -3054,15 +3054,15 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
} /* end of mgsl_set_termios() */

/* mgsl_close()
- *
+ *
* Called when port is closed. Wait for remaining data to be
* sent. Disable port and free resources.
- *
+ *
* Arguments:
- *
+ *
* tty pointer to open tty structure
* filp pointer to open file object
- *
+ *
* Return Value: None
*/
static void mgsl_close(struct tty_struct *tty, struct file * filp)
@@ -3071,7 +3071,7 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)

if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
return;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
__FILE__,__LINE__, info->device_name, info->port.count);
@@ -3087,13 +3087,13 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
shutdown(info);
mutex_unlock(&info->port.mutex);

- tty_port_close_end(&info->port, tty);
+ tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
-cleanup:
+cleanup:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
tty->driver->name, info->port.count);
-
+
} /* end of mgsl_close() */

/* mgsl_wait_until_sent()
@@ -3131,7 +3131,7 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
* send a character, and make it at least 1. The check
* interval should also be less than the timeout.
* Note: use tight timings here to satisfy the NIST-PCTS.
- */
+ */

if ( info->params.data_rate ) {
char_time = info->timeout/(32 * 5);
@@ -3139,10 +3139,10 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
char_time++;
} else
char_time = 1;
-
+
if (timeout)
char_time = min_t(unsigned long, char_time, timeout);
-
+
if ( info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
while (info->tx_active) {
@@ -3162,12 +3162,12 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
}
-
+
exit:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
__FILE__,__LINE__, info->device_name );
-
+
} /* end of mgsl_wait_until_sent() */

/* mgsl_hangup()
@@ -3181,23 +3181,23 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
static void mgsl_hangup(struct tty_struct *tty)
{
struct mgsl_struct * info = tty->driver_data;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_hangup(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
return;

mgsl_flush_buffer(tty);
shutdown(info);
-
- info->port.count = 0;
+
+ info->port.count = 0;
tty_port_set_active(&info->port, 0);
info->port.tty = NULL;

wake_up_interruptible(&info->port.open_wait);
-
+
} /* end of mgsl_hangup() */

/*
@@ -3210,7 +3210,7 @@ static int carrier_raised(struct tty_port *port)
{
unsigned long flags;
struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
-
+
spin_lock_irqsave(&info->irq_spinlock, flags);
usc_get_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock, flags);
@@ -3233,16 +3233,16 @@ static void dtr_rts(struct tty_port *port, int on)


/* block_til_ready()
- *
+ *
* Block the current process until the specified port
* is ready to be opened.
- *
+ *
* Arguments:
- *
+ *
* tty pointer to tty info structure
* filp pointer to open file object
* info pointer to device instance data
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int block_til_ready(struct tty_struct *tty, struct file * filp,
@@ -3254,7 +3254,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
unsigned long flags;
int dcd;
struct tty_port *port = &info->port;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready on %s\n",
__FILE__,__LINE__, tty->driver->name );
@@ -3274,10 +3274,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
* mgsl_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
-
+
retval = 0;
add_wait_queue(&port->open_wait, &wait);
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready before block on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
@@ -3307,33 +3307,33 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
retval = -ERESTARTSYS;
break;
}
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
-
+
tty_unlock(tty);
schedule();
tty_lock(tty);
}
-
+
set_current_state(TASK_RUNNING);
remove_wait_queue(&port->open_wait, &wait);
-
+
/* FIXME: Racy on hangup during close wait */
if (!tty_hung_up_p(filp))
port->count++;
port->blocked_open--;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
-
+
if (!retval)
tty_port_set_active(port, 1);
-
+
return retval;
-
+
} /* end of block_til_ready() */

static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
@@ -3376,7 +3376,7 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
int retval;

info->port.tty = tty;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
__FILE__,__LINE__,tty->driver->name, info->port.count);
@@ -3411,17 +3411,17 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
printk("%s(%d):mgsl_open(%s) success\n",
__FILE__,__LINE__, info->device_name);
retval = 0;
-
-cleanup:
+
+cleanup:
if (retval) {
if (tty->count == 1)
info->port.tty = NULL; /* tty layer will release tty struct */
if(info->port.count)
info->port.count--;
}
-
+
return retval;
-
+
} /* end of mgsl_open() */

/*
@@ -3439,7 +3439,7 @@ static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
info->phys_memory_base, info->phys_lcr_base);
} else {
seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
- info->device_name, info->io_base,
+ info->device_name, info->io_base,
info->irq_level, info->dma_level);
}

@@ -3447,7 +3447,7 @@ static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_get_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
stat_buf[0] = 0;
stat_buf[1] = 0;
if (info->serial_signals & SerialSignal_RTS)
@@ -3491,16 +3491,16 @@ static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
if (info->icount.overrun)
seq_printf(m, " oe:%d", info->icount.overrun);
}
-
+
/* Append serial signal status to end */
seq_printf(m, " %s\n", stat_buf+1);
-
+
seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
info->tx_active,info->bh_requested,info->bh_running,
info->pending_bh);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
- {
+ {
u16 Tcsr = usc_InReg( info, TCSR );
u16 Tdmr = usc_InDmaReg( info, TDMR );
u16 Ticr = usc_InReg( info, TICR );
@@ -3523,9 +3523,9 @@ static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
static int mgsl_proc_show(struct seq_file *m, void *v)
{
struct mgsl_struct *info;
-
+
seq_printf(m, "synclink driver:%s\n", driver_version);
-
+
info = mgsl_device_list;
while( info ) {
line_info(m, info);
@@ -3535,10 +3535,10 @@ static int mgsl_proc_show(struct seq_file *m, void *v)
}

/* mgsl_allocate_dma_buffers()
- *
+ *
* Allocate and format DMA buffers (ISA adapter)
* or format shared memory buffers (PCI adapter).
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise error
*/
@@ -3595,12 +3595,12 @@ static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)

info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
-
- /*
- * limit total TxBuffers & RxBuffers to 62 4K total
- * (ala PCI Allocation)
+
+ /*
+ * limit total TxBuffers & RxBuffers to 62 4K total
+ * (ala PCI Allocation)
*/
-
+
if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
info->rx_buffer_count = 62 - info->tx_buffer_count;

@@ -3609,16 +3609,16 @@ static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
if ( debug_level >= DEBUG_LEVEL_INFO )
printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
__FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
-
+
if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
- mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
- mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
+ mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
+ mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
return -ENOMEM;
}
-
+
mgsl_reset_rx_dma_buffers( info );
mgsl_reset_tx_dma_buffers( info );

@@ -3628,24 +3628,24 @@ static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)

/*
* mgsl_alloc_buffer_list_memory()
- *
+ *
* Allocate a common DMA buffer for use as the
* receive and transmit buffer lists.
- *
+ *
* A buffer list is a set of buffer entries where each entry contains
* a pointer to an actual buffer and a pointer to the next buffer entry
* (plus some other info about the buffer).
- *
+ *
* The buffer entries for a list are built to form a circular list so
* that when the entire list has been traversed you start back at the
* beginning.
- *
+ *
* This function allocates memory for just the buffer entries.
* The links (pointer to next entry) are filled in with the physical
* address of the next entry so the adapter can navigate the list
* using bus master DMA. The pointers to the actual buffers are filled
* out later when the actual buffers are allocated.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise error
*/
@@ -3727,7 +3727,7 @@ static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
/* Free DMA buffers allocated for use as the
* receive and transmit buffer lists.
* Warning:
- *
+ *
* The data transfer buffers associated with the buffer list
* MUST be freed before freeing the buffer list itself because
* the buffer list contains the information necessary to free
@@ -3737,7 +3737,7 @@ static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
{
if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
-
+
info->buffer_list = NULL;
info->rx_buffer_list = NULL;
info->tx_buffer_list = NULL;
@@ -3746,18 +3746,18 @@ static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )

/*
* mgsl_alloc_frame_memory()
- *
+ *
* Allocate the frame DMA buffers used by the specified buffer list.
* Each DMA buffer will be one memory page in size. This is necessary
* because memory can fragment enough that it may be impossible
* contiguous pages.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* BufferList pointer to list of buffer entries
* Buffercount count of buffer entries in buffer list
- *
+ *
* Return Value: 0 if success, otherwise -ENOMEM
*/
static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
@@ -3789,16 +3789,16 @@ static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *Buff

/*
* mgsl_free_frame_memory()
- *
+ *
* Free the buffers associated with
* each buffer entry of a buffer list.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* BufferList pointer to list of buffer entries
* Buffercount count of buffer entries in buffer list
- *
+ *
* Return Value: None
*/
static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
@@ -3818,9 +3818,9 @@ static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *Buf
} /* end of mgsl_free_frame_memory() */

/* mgsl_free_dma_buffers()
- *
+ *
* Free DMA buffers
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -3835,14 +3835,14 @@ static void mgsl_free_dma_buffers( struct mgsl_struct *info )

/*
* mgsl_alloc_intermediate_rxbuffer_memory()
- *
+ *
* Allocate a buffer large enough to hold max_frame_size. This buffer
* is used to pass an assembled frame to the line discipline.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
- *
+ *
* Return Value: 0 if success, otherwise -ENOMEM
*/
static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
@@ -3863,12 +3863,12 @@ static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)

/*
* mgsl_free_intermediate_rxbuffer_memory()
- *
- *
+ *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
- *
+ *
* Return Value: None
*/
static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
@@ -4032,7 +4032,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
return -ENODEV;
}
info->io_addr_requested = true;
-
+
if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
info->device_name, info ) < 0 ) {
printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n",
@@ -4040,7 +4040,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
goto errout;
}
info->irq_requested = true;
-
+
if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
@@ -4062,13 +4062,13 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
__FILE__,__LINE__,info->device_name, info->phys_memory_base );
goto errout;
}
-
+
if ( !mgsl_memory_test(info) ) {
printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_memory_base );
goto errout;
}
-
+
info->lcr_base = ioremap_nocache(info->phys_lcr_base,
PAGE_SIZE);
if (!info->lcr_base) {
@@ -4077,10 +4077,10 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
goto errout;
}
info->lcr_base += info->lcr_offset;
-
+
} else {
/* claim DMA channel */
-
+
if (request_dma(info->dma_level,info->device_name) < 0){
printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n",
__FILE__,__LINE__,info->device_name, info->dma_level );
@@ -4088,17 +4088,17 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
}
info->dma_requested = true;

- /* ISA adapter uses bus master DMA */
+ /* ISA adapter uses bus master DMA */
set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
enable_dma(info->dma_level);
}
-
+
if ( mgsl_allocate_dma_buffers(info) < 0 ) {
printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n",
__FILE__,__LINE__,info->device_name, info->dma_level );
goto errout;
- }
-
+ }
+
return 0;
errout:
mgsl_release_resources(info);
@@ -4111,7 +4111,7 @@ static void mgsl_release_resources(struct mgsl_struct *info)
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_release_resources(%s) entry\n",
__FILE__,__LINE__,info->device_name );
-
+
if ( info->irq_requested ) {
free_irq(info->irq_level, info);
info->irq_requested = false;
@@ -4124,7 +4124,7 @@ static void mgsl_release_resources(struct mgsl_struct *info)
mgsl_free_dma_buffers(info);
mgsl_free_intermediate_rxbuffer_memory(info);
mgsl_free_intermediate_txbuffer_memory(info);
-
+
if ( info->io_addr_requested ) {
release_region(info->io_base,info->io_addr_size);
info->io_addr_requested = false;
@@ -4145,18 +4145,18 @@ static void mgsl_release_resources(struct mgsl_struct *info)
iounmap(info->lcr_base - info->lcr_offset);
info->lcr_base = NULL;
}
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_release_resources(%s) exit\n",
__FILE__,__LINE__,info->device_name );
-
+
} /* end of mgsl_release_resources() */

/* mgsl_add_device()
- *
+ *
* Add the specified device instance data structure to the
* global linked list of devices and increment the device count.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -4165,7 +4165,7 @@ static void mgsl_add_device( struct mgsl_struct *info )
info->next_device = NULL;
info->line = mgsl_device_count;
sprintf(info->device_name,"ttySL%d",info->line);
-
+
if (info->line < MAX_TOTAL_DEVICES) {
if (maxframe[info->line])
info->max_frame_size = maxframe[info->line];
@@ -4186,21 +4186,21 @@ static void mgsl_add_device( struct mgsl_struct *info )
}

mgsl_device_count++;
-
+
if ( !mgsl_device_list )
mgsl_device_list = info;
- else {
+ else {
struct mgsl_struct *current_dev = mgsl_device_list;
while( current_dev->next_device )
current_dev = current_dev->next_device;
current_dev->next_device = info;
}
-
+
if ( info->max_frame_size < 4096 )
info->max_frame_size = 4096;
else if ( info->max_frame_size > 65535 )
info->max_frame_size = 65535;
-
+
if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
@@ -4225,19 +4225,19 @@ static const struct tty_port_operations mgsl_port_ops = {


/* mgsl_allocate_device()
- *
+ *
* Allocate and initialize a device instance structure
- *
+ *
* Arguments: none
* Return Value: pointer to mgsl_struct if success, otherwise NULL
*/
static struct mgsl_struct* mgsl_allocate_device(void)
{
struct mgsl_struct *info;
-
+
info = kzalloc(sizeof(struct mgsl_struct),
GFP_KERNEL);
-
+
if (!info) {
printk("Error can't allocate device instance data\n");
} else {
@@ -4257,7 +4257,7 @@ static struct mgsl_struct* mgsl_allocate_device(void)
info->num_tx_dma_buffers = 1;
info->num_tx_holding_buffers = 0;
}
-
+
return info;

} /* end of mgsl_allocate_device()*/
@@ -4298,7 +4298,7 @@ static int mgsl_init_tty(void)
serial_driver = alloc_tty_driver(128);
if (!serial_driver)
return -ENOMEM;
-
+
serial_driver->driver_name = "synclink";
serial_driver->name = "ttySL";
serial_driver->major = ttymajor;
@@ -4319,7 +4319,7 @@ static int mgsl_init_tty(void)
serial_driver = NULL;
return rc;
}
-
+
printk("%s %s, tty major#%d\n",
driver_name, driver_version,
serial_driver->major);
@@ -4332,14 +4332,14 @@ static void mgsl_enum_isa_devices(void)
{
struct mgsl_struct *info;
int i;
-
+
/* Check for user specified ISA devices */
-
+
for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
if ( debug_level >= DEBUG_LEVEL_INFO )
printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
io[i], irq[i], dma[i] );
-
+
info = mgsl_allocate_device();
if ( !info ) {
/* error allocating device instance data */
@@ -4347,7 +4347,7 @@ static void mgsl_enum_isa_devices(void)
printk( "can't allocate device instance data.\n");
continue;
}
-
+
/* Copy user configuration info to device instance data */
info->io_base = (unsigned int)io[i];
info->irq_level = (unsigned int)irq[i];
@@ -4356,7 +4356,7 @@ static void mgsl_enum_isa_devices(void)
info->bus_type = MGSL_BUS_TYPE_ISA;
info->io_addr_size = 16;
info->irq_flags = 0;
-
+
mgsl_add_device( info );
}
}
@@ -4388,7 +4388,7 @@ static void synclink_cleanup(void)
tty_port_destroy(&tmp->port);
kfree(tmp);
}
-
+
if (pci_registered)
pci_unregister_driver(&synclink_pci_driver);
}
@@ -4516,7 +4516,7 @@ static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
inw( info->io_base );

} /* end of usc_OutDmaReg() */
-
+
/*
* usc_InDmaReg()
*
@@ -4546,7 +4546,7 @@ static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
*
* usc_OutReg()
*
- * Write a 16-bit value to a USC serial channel register
+ * Write a 16-bit value to a USC serial channel register
*
* Arguments:
*
@@ -4602,7 +4602,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
{
u16 RegValue;
bool PreSL1660;
-
+
/*
* determine if the IUSC on the adapter is pre-SL1660. If
* not, take advantage of the UnderWait feature of more
@@ -4631,14 +4631,14 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
** 1000 1110 0000 0110 = 0x8e06
*/
RegValue = 0x8e06;
-
+
/*--------------------------------------------------
* ignore user options for UnderRun Actions and
* preambles
*--------------------------------------------------*/
}
else
- {
+ {
/* Channel mode Register (CMR)
*
* <15..14> 00 Tx Sub modes, Underrun Action
@@ -4776,7 +4776,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
usc_ClearIrqPendingBits( info, RECEIVE_STATUS );

/* Transmit mode Register (TMR)
- *
+ *
* <15..13> 000 encoding
* <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
* <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
@@ -4831,7 +4831,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )

if ( info->bus_type == MGSL_BUS_TYPE_PCI )
usc_OutReg( info, TICR, 0x0736 );
- else
+ else
usc_OutReg( info, TICR, 0x1436 );

usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
@@ -4851,14 +4851,14 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
** <2> x All Sent
** <1> x TxUnder
** <0> x TxEmpty
- **
+ **
** 0000 0000 0000 0000 = 0x0000
*/
info->tcsr_value = 0;

if ( !PreSL1660 )
info->tcsr_value |= TCSR_UNDERWAIT;
-
+
usc_OutReg( info, TCSR, info->tcsr_value );

/* Clock mode Control Register (CMCR)
@@ -4946,7 +4946,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )

/*--------------------------------------------------
* ejz: for DPLL mode, application should use the
- * same clock speed as the partner system, even
+ * same clock speed as the partner system, even
* though clocking is derived from the input RxData.
* In case the user uses a 0 for the clock speed,
* default to 0xffffffff and don't try to divide by
@@ -4961,7 +4961,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
}
else
Tc = -1;
-
+

/* Write 16-bit Time Constant for BRG1 */
usc_OutReg( info, TC1R, Tc );
@@ -5008,7 +5008,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
usc_OutReg( info, SICR,
(u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
}
-
+

/* enable Master Interrupt Enable bit (MIE) */
usc_EnableMasterIrqBit( info );
@@ -5161,7 +5161,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )

usc_stop_transmitter(info);
usc_stop_receiver(info);
-
+
} /* end of usc_set_sdlc_mode() */

/* usc_enable_loopback()
@@ -5179,7 +5179,7 @@ static void usc_enable_loopback(struct mgsl_struct *info, int enable)
if (enable) {
/* blank external TXD output */
usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7 | BIT6));
-
+
/* Clock mode Control Register (CMCR)
*
* <15..14> 00 counter 1 Disabled
@@ -5218,12 +5218,12 @@ static void usc_enable_loopback(struct mgsl_struct *info, int enable)
} else {
/* enable external TXD output */
usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7 | BIT6));
-
+
/* clear Internal Data loopback mode */
info->loopback_bits = 0;
outw( 0,info->io_base + CCAR );
}
-
+
} /* end of usc_enable_loopback() */

/* usc_enable_aux_clock()
@@ -5313,7 +5313,7 @@ static void usc_process_rxoverrun_sync( struct mgsl_struct *info )

/* CurrentRxBuffer points to the 1st buffer of the next */
/* possibly available receive frame. */
-
+
frame_start_index = start_index = end_index = info->current_rx_buffer;

/* Search for an unfinished string of buffers. This means */
@@ -5392,9 +5392,9 @@ static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
-
+
usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
-
+
/* This empties the receive FIFO and loads the RCC with RCLR */
usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );

@@ -5439,7 +5439,7 @@ static void usc_stop_receiver( struct mgsl_struct *info )
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):usc_stop_receiver(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
/* Disable receive DMA channel. */
/* This also disables receive DMA channel interrupts */
usc_DmaCmd( info, DmaCmd_ResetRxChannel );
@@ -5457,12 +5457,12 @@ static void usc_stop_receiver( struct mgsl_struct *info )
info->rx_enabled = false;
info->rx_overflow = false;
info->rx_rcc_underrun = false;
-
+
} /* end of stop_receiver() */

/* usc_start_receiver()
*
- * Enable the USC receiver
+ * Enable the USC receiver
*
* Arguments: info pointer to device instance data
* Return Value: None
@@ -5470,7 +5470,7 @@ static void usc_stop_receiver( struct mgsl_struct *info )
static void usc_start_receiver( struct mgsl_struct *info )
{
u32 phys_addr;
-
+
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):usc_start_receiver(%s)\n",
__FILE__,__LINE__, info->device_name );
@@ -5539,7 +5539,7 @@ static void usc_start_transmitter( struct mgsl_struct *info )
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):usc_start_transmitter(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
if ( info->xmit_cnt ) {

/* If auto RTS enabled and RTS is inactive, then assert */
@@ -5568,7 +5568,7 @@ static void usc_start_transmitter( struct mgsl_struct *info )
} else {
/* Disable transmit DMA controller while programming. */
usc_DmaCmd( info, DmaCmd_ResetTxChannel );
-
+
/* Transmit DMA buffer is loaded, so program USC */
/* to send the frame contained in the buffers. */

@@ -5611,9 +5611,9 @@ static void usc_start_transmitter( struct mgsl_struct *info )

/* Initialize Transmit DMA Channel */
usc_DmaCmd( info, DmaCmd_InitTxChannel );
-
+
usc_TCmd( info, TCmd_SendFrame );
-
+
mod_timer(&info->tx_timer, jiffies +
msecs_to_jiffies(5000));
}
@@ -5642,9 +5642,9 @@ static void usc_stop_transmitter( struct mgsl_struct *info )
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):usc_stop_transmitter(%s)\n",
__FILE__,__LINE__, info->device_name );
-
- del_timer(&info->tx_timer);
-
+
+ del_timer(&info->tx_timer);
+
usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
@@ -5670,10 +5670,10 @@ static void usc_load_txfifo( struct mgsl_struct *info )
{
int Fifocount;
u8 TwoBytes[2];
-
+
if ( !info->xmit_cnt && !info->x_char )
- return;
-
+ return;
+
/* Select transmit FIFO status readback in TICR */
usc_TCmd( info, TCmd_SelectTicrTxFifostatus );

@@ -5685,22 +5685,22 @@ static void usc_load_txfifo( struct mgsl_struct *info )

if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
/* write a 16-bit word from transmit buffer to 16C32 */
-
+
TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-
+
outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
-
+
info->xmit_cnt -= 2;
info->icount.tx += 2;
} else {
/* only 1 byte left to transmit or 1 FIFO slot left */
-
+
outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
info->io_base + CCAR );
-
+
if (info->x_char) {
/* transmit pending high priority char */
outw( info->x_char,info->io_base + CCAR );
@@ -5739,8 +5739,8 @@ static void usc_reset( struct mgsl_struct *info )
*MiscCtrl = info->misc_ctrl_value;

/*
- * Force at least 170ns delay before clearing
- * reset bit. Each read from LCR takes at least
+ * Force at least 170ns delay before clearing
+ * reset bit. Each read from LCR takes at least
* 30ns so 10 times for 300ns to be safe.
*/
for(i=0;i<10;i++)
@@ -5784,7 +5784,7 @@ static void usc_reset( struct mgsl_struct *info )
* By writing to io_base + SDPIN the Wait/Ack pin is
* programmed to work as a Wait pin.
*/
-
+
outw( 0x000c,info->io_base + SDPIN );


@@ -5866,7 +5866,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
RegValue |= BIT14;
usc_OutReg( info, CMR, RegValue );

-
+
/* Receiver mode Register (RMR)
*
* <15..13> 000 encoding = None
@@ -5897,7 +5897,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )

usc_RCmd( info, RCmd_SelectRicrIntLevel );

-
+
/* Receive Interrupt Control Register (RICR)
*
* <15..8> ? RxFIFO IRQ Request Level
@@ -5917,13 +5917,13 @@ static void usc_set_async_mode( struct mgsl_struct *info )
*
* 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
*/
-
+
usc_OutReg( info, RICR, 0x0000 );

usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
usc_ClearIrqPendingBits( info, RECEIVE_STATUS );

-
+
/* Transmit mode Register (TMR)
*
* <15..13> 000 encoding = None
@@ -5956,7 +5956,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )

usc_TCmd( info, TCmd_SelectTicrIntLevel );

-
+
/* Transmit Interrupt Control Register (TICR)
*
* <15..8> ? Transmit FIFO IRQ Level
@@ -5979,7 +5979,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )

usc_enable_async_clock( info, info->params.data_rate );

-
+
/* Channel Control/status Register (CCSR)
*
* <15> X RCC FIFO Overflow status (RO)
@@ -5997,7 +5997,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
*
* 0000 0000 0010 0000 = 0x0020
*/
-
+
usc_OutReg( info, CCSR, 0x0020 );

usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
@@ -6041,7 +6041,7 @@ static void usc_loopback_frame( struct mgsl_struct *info )
unsigned long oldmode = info->params.mode;

info->params.mode = MGSL_MODE_HDLC;
-
+
usc_DisableMasterIrqBit( info );

usc_set_sdlc_mode( info );
@@ -6049,7 +6049,7 @@ static void usc_loopback_frame( struct mgsl_struct *info )

/* Write 16-bit Time Constant for BRG0 */
usc_OutReg( info, TC0R, 0 );
-
+
/* Channel Control Register (CCR)
*
* <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
@@ -6083,7 +6083,7 @@ static void usc_loopback_frame( struct mgsl_struct *info )
/* ENABLE TRANSMITTER */
usc_TCmd( info, TCmd_SendFrame );
usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
-
+
/* WAIT FOR RECEIVE COMPLETE */
for (i=0 ; i<1000 ; i++)
if (usc_InReg( info, RCSR ) & (BIT8 | BIT4 | BIT3 | BIT1))
@@ -6221,7 +6221,7 @@ static void usc_get_serial_signals( struct mgsl_struct *info )
*
* Set the state of RTS and DTR based on contents of
* serial_signals member of device extension.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -6262,7 +6262,7 @@ static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
if ( data_rate ) {
/*
* Clock mode Control Register (CMCR)
- *
+ *
* <15..14> 00 counter 1 Disabled
* <13..12> 00 counter 0 Disabled
* <11..10> 11 BRG1 Input is TxC Pin
@@ -6273,7 +6273,7 @@ static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
*
* 0000 1111 0110 0100 = 0x0f64
*/
-
+
usc_OutReg( info, CMCR, 0x0f64 );


@@ -6288,7 +6288,7 @@ static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
else
usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );

-
+
/*
* Hardware Configuration Register (HCR)
* Clear Bit 1, BRG0 mode = Continuous
@@ -6400,11 +6400,11 @@ static int num_free_tx_dma_buffers(struct mgsl_struct *info)

/*
* mgsl_reset_rx_dma_buffers()
- *
+ *
* Set the count for all receive buffers to DMABUFFERSIZE
* and set the current buffer to the first buffer. This effectively
* makes all buffers free and discards any data in buffers.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -6424,16 +6424,16 @@ static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )

/*
* mgsl_free_rx_frame_buffers()
- *
+ *
* Free the receive buffers used by a received SDLC
* frame such that the buffers can be reused.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* StartIndex index of 1st receive buffer of frame
* EndIndex index of last receive buffer of frame
- *
+ *
* Return Value: None
*/
static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
@@ -6472,7 +6472,7 @@ static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int S
} /* end of free_rx_frame_buffers() */

/* mgsl_get_rx_frame()
- *
+ *
* This function attempts to return a received SDLC frame from the
* receive DMA buffers. Only frames received without errors are returned.
*
@@ -6489,7 +6489,7 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
unsigned long flags;
struct tty_struct *tty = info->port.tty;
bool return_frame = false;
-
+
/*
* current_rx_buffer points to the 1st buffer of the next available
* receive frame. To find the last buffer of the frame look for
@@ -6533,7 +6533,7 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)


/* check status of receive frame */
-
+
status = info->rx_buffer_list[EndIndex].status;

if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN |
@@ -6572,17 +6572,17 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
if ( info->params.crc_type == HDLC_CRC_16_CCITT )
framesize -= 2;
else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
- framesize -= 4;
+ framesize -= 4;
}

if ( debug_level >= DEBUG_LEVEL_BH )
printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
__FILE__,__LINE__,info->device_name,status,framesize);
-
+
if ( debug_level >= DEBUG_LEVEL_DATA )
mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
min_t(int, framesize, DMABUFFERSIZE),0);
-
+
if (framesize) {
if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
((framesize+1) > info->max_frame_size) ) ||
@@ -6596,19 +6596,19 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)

if ( !(status & RXSTATUS_CRC_ERROR))
info->icount.rxok++;
-
+
while(copy_count) {
int partial_count;
if ( copy_count > DMABUFFERSIZE )
partial_count = DMABUFFERSIZE;
else
partial_count = copy_count;
-
+
pBufEntry = &(info->rx_buffer_list[index]);
memcpy( ptmp, pBufEntry->virt_addr, partial_count );
ptmp += partial_count;
copy_count -= partial_count;
-
+
if ( ++index == info->rx_buffer_count )
index = 0;
}
@@ -6641,8 +6641,8 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
Cleanup:

if ( info->rx_enabled && info->rx_overflow ) {
- /* The receiver needs to restarted because of
- * a receive overflow (buffer or FIFO). If the
+ /* The receiver needs to restarted because of
+ * a receive overflow (buffer or FIFO). If the
* receive buffers are now empty, then restart receiver.
*/

@@ -6831,15 +6831,15 @@ static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
} /* end of mgsl_get_raw_rx_frame() */

/* mgsl_load_tx_dma_buffer()
- *
+ *
* Load the transmit DMA buffer with the specified data.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device extension
* Buffer pointer to buffer containing frame to load
* BufferSize size in bytes of frame in Buffer
- *
+ *
* Return Value: None
*/
static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
@@ -6848,7 +6848,7 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
unsigned short Copycount;
unsigned int i = 0;
DMABUFFERENTRY *pBufEntry;
-
+
if ( debug_level >= DEBUG_LEVEL_DATA )
mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);

@@ -6858,7 +6858,7 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
*/
info->cmr_value |= BIT13;
}
-
+
/* begin loading the frame in the next available tx dma
* buffer, remember it's starting location for setting
* up tx dma operation
@@ -6879,7 +6879,7 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
while( BufferSize ){
/* Get a pointer to next DMA buffer entry. */
pBufEntry = &info->tx_buffer_list[i++];
-
+
if ( i == info->tx_buffer_count )
i=0;

@@ -6913,9 +6913,9 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,

/*
* mgsl_register_test()
- *
+ *
* Performs a register test of the 16C32.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: true if test passed, otherwise false
*/
@@ -6971,7 +6971,7 @@ static bool mgsl_register_test( struct mgsl_struct *info )
} /* end of mgsl_register_test() */

/* mgsl_irq_test() Perform interrupt test of the 16C32.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: true if test passed, otherwise false
*/
@@ -6984,7 +6984,7 @@ static bool mgsl_irq_test( struct mgsl_struct *info )
usc_reset(info);

/*
- * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
+ * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
* The ISR sets irq_occurred to true.
*/

@@ -6999,7 +6999,7 @@ static bool mgsl_irq_test( struct mgsl_struct *info )
usc_EnableMasterIrqBit(info);
usc_EnableInterrupts(info, IO_PIN);
usc_ClearIrqPendingBits(info, IO_PIN);
-
+
usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);

@@ -7009,21 +7009,21 @@ static bool mgsl_irq_test( struct mgsl_struct *info )
while( EndTime-- && !info->irq_occurred ) {
msleep_interruptible(10);
}
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_reset(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
return info->irq_occurred;

} /* end of mgsl_irq_test() */

/* mgsl_dma_test()
- *
+ *
* Perform a DMA test of the 16C32. A small frame is
* transmitted via DMA from a transmit buffer to a receive buffer
* using single buffer DMA mode.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: true if test passed, otherwise false
*/
@@ -7044,17 +7044,17 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
/* load default port options */
memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
-
+
#define TESTFRAMESIZE 40

spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
/* setup 16C32 for SDLC DMA transfer mode */

usc_reset(info);
usc_set_sdlc_mode(info);
usc_enable_loopback(info,1);
-
+
/* Reprogram the RDMR so that the 16C32 does NOT clear the count
* field of the buffer entry after fetching buffer address. This
* way we can detect a DMA failure for a DMA read (which should be
@@ -7063,7 +7063,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
*/

/* Receive DMA mode Register (RDMR)
- *
+ *
* <15..14> 11 DMA mode = Linked List Buffer mode
* <13> 1 RSBinA/L = store Rx status Block in List entry
* <12> 0 1 = Clear count of List Entry after fetching
@@ -7071,12 +7071,12 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
* <9> 1 Terminate Buffer on RxBound
* <8> 0 Bus Width = 16bits
* <7..0> ? status Bits (write as 0s)
- *
+ *
* 1110 0010 0000 0000 = 0xe200
*/

usc_OutDmaReg( info, RDMR, 0xe200 );
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);


@@ -7112,12 +7112,12 @@ static bool mgsl_dma_test( struct mgsl_struct *info )

info->tx_buffer_list[1].count = 0;
info->rx_buffer_list[1].count = 0;
-
+

/***************************/
/* Program 16C32 receiver. */
/***************************/
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);

/* setup DMA transfers */
@@ -7134,7 +7134,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info )

/* Enable Receiver (RMR <1..0> = 10) */
usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);


@@ -7167,7 +7167,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
/******************************/
/* Program 16C32 transmitter. */
/******************************/
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);

/* Program the Transmit Character Length Register (TCLR) */
@@ -7190,14 +7190,14 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
/* wait for DMA controller to fill transmit FIFO */

usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);


/**********************************/
/* WAIT FOR TRANSMIT FIFO TO FILL */
/**********************************/
-
+
/* Wait 100ms */
EndTime = jiffies + msecs_to_jiffies(100);

@@ -7210,7 +7210,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
spin_lock_irqsave(&info->irq_spinlock,flags);
FifoLevel = usc_InReg(info, TICR) >> 8;
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
if ( FifoLevel < 16 )
break;
else
@@ -7228,11 +7228,11 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
/* Enable 16C32 transmitter. */

spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
/* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
usc_TCmd( info, TCmd_SendFrame );
usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);


@@ -7307,15 +7307,15 @@ static bool mgsl_dma_test( struct mgsl_struct *info )

/* restore current port options */
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
-
+
return rc;

} /* end of mgsl_dma_test() */

/* mgsl_adapter_test()
- *
+ *
* Perform the register, IRQ, and DMA tests for the 16C32.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise -ENODEV
*/
@@ -7324,7 +7324,7 @@ static int mgsl_adapter_test( struct mgsl_struct *info )
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):Testing device %s\n",
__FILE__,__LINE__,info->device_name );
-
+
if ( !mgsl_register_test( info ) ) {
info->init_error = DiagStatus_AddressFailure;
printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
@@ -7349,15 +7349,15 @@ static int mgsl_adapter_test( struct mgsl_struct *info )
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):device %s passed diagnostics\n",
__FILE__,__LINE__,info->device_name );
-
+
return 0;

} /* end of mgsl_adapter_test() */

/* mgsl_memory_test()
- *
+ *
* Test the shared memory on a PCI adapter.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: true if test passed, otherwise false
*/
@@ -7407,35 +7407,35 @@ static bool mgsl_memory_test( struct mgsl_struct *info )


/* mgsl_load_pci_memory()
- *
+ *
* Load a large block of data into the PCI shared memory.
* Use this instead of memcpy() or memmove() to move data
* into the PCI shared memory.
- *
+ *
* Notes:
- *
+ *
* This function prevents the PCI9050 interface chip from hogging
* the adapter local bus, which can starve the 16C32 by preventing
* 16C32 bus master cycles.
- *
+ *
* The PCI9050 documentation says that the 9050 will always release
* control of the local bus after completing the current read
* or write operation.
- *
+ *
* It appears that as long as the PCI9050 write FIFO is full, the
* PCI9050 treats all of the writes as a single burst transaction
* and will not release the bus. This causes DMA latency problems
* at high speeds when copying large data blocks to the shared
* memory.
- *
+ *
* This function in effect, breaks the a large shared memory write
* into multiple transations by interleaving a shared memory read
* which will flush the write FIFO and 'complete' the write
* transation. This allows any pending DMA request to gain control
* of the local bus in a timely fasion.
- *
+ *
* Arguments:
- *
+ *
* TargetPtr pointer to target address in PCI shared memory
* SourcePtr pointer to source buffer for data
* count count in bytes of data to copy
@@ -7472,13 +7472,13 @@ static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int coun
printk("%s tx data:\n",info->device_name);
else
printk("%s rx data:\n",info->device_name);
-
+
while(count) {
if (count > 16)
linecount = 16;
else
linecount = count;
-
+
for(i=0;i<linecount;i++)
printk("%02X ",(unsigned char)data[i]);
for(;i<17;i++)
@@ -7490,17 +7490,17 @@ static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int coun
printk(".");
}
printk("\n");
-
+
data += linecount;
count -= linecount;
}
} /* end of mgsl_trace_block() */

/* mgsl_tx_timeout()
- *
+ *
* called when HDLC frame times out
* update stats and do tx completion processing
- *
+ *
* Arguments: context pointer to device instance data
* Return Value: None
*/
@@ -7508,7 +7508,7 @@ static void mgsl_tx_timeout(struct timer_list *t)
{
struct mgsl_struct *info = from_timer(info, t, tx_timer);
unsigned long flags;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_tx_timeout(%s)\n",
__FILE__,__LINE__,info->device_name);
@@ -7525,14 +7525,14 @@ static void mgsl_tx_timeout(struct timer_list *t)
usc_loopmode_cancel_transmit( info );

spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
#endif
mgsl_bh_transmit(info);
-
+
} /* end of mgsl_tx_timeout() */

/* signal that there are no more frames to send, so that
@@ -7542,7 +7542,7 @@ static void mgsl_tx_timeout(struct timer_list *t)
static int mgsl_loopmode_send_done( struct mgsl_struct * info )
{
unsigned long flags;
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
if (info->tx_active)
@@ -7583,13 +7583,13 @@ static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
static void usc_loopmode_insert_request( struct mgsl_struct * info )
{
info->loopmode_insert_requested = true;
-
+
/* enable RxAbort irq. On next RxAbort, clear CMR:13 to
* begin repeating TxData on RxData (complete insertion)
*/
- usc_OutReg( info, RICR,
+ usc_OutReg( info, RICR,
(usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
-
+
/* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
info->cmr_value |= BIT13;
usc_OutReg(info, CMR, info->cmr_value);
@@ -8045,11 +8045,11 @@ static int synclink_init_one (struct pci_dev *dev,
}

/* Copy user configuration info to device instance data */
-
+
info->io_base = pci_resource_start(dev, 2);
info->irq_level = dev->irq;
info->phys_memory_base = pci_resource_start(dev, 3);
-
+
/* Because veremap only works on page boundaries we must map
* a larger area than is actually implemented for the LCR
* memory range. We map a full page starting at the page boundary.
@@ -8057,7 +8057,7 @@ static int synclink_init_one (struct pci_dev *dev,
info->phys_lcr_base = pci_resource_start(dev, 0);
info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
info->phys_lcr_base &= ~(PAGE_SIZE-1);
-
+
info->bus_type = MGSL_BUS_TYPE_PCI;
info->io_addr_size = 8;
info->irq_flags = IRQF_SHARED;
@@ -8068,14 +8068,14 @@ static int synclink_init_one (struct pci_dev *dev,
info->hw_version = 1;
} else {
/* Version 0 PCI9050 based 5V PCI adapter
- * A PCI9050 bug prevents reading LCR registers if
+ * A PCI9050 bug prevents reading LCR registers if
* LCR base address bit 7 is set. Maintain shadow
* value so we can write to LCR misc control reg.
*/
info->misc_ctrl_value = 0x087e4546;
info->hw_version = 0;
}
-
+
mgsl_add_device(info);

return 0;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 1e4d5b9c981a..58570451d0be 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -946,7 +946,7 @@ static int write(struct tty_struct *tty,
info->max_frame_size - info->tx_put));
if (c <= 0)
break;
-
+
memcpy(info->tx_buf + info->tx_put, buf, c);

spin_lock_irqsave(&info->lock,flags);
@@ -1291,7 +1291,7 @@ static int ioctl(struct tty_struct *tty,
*/
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
-
+
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
@@ -2092,7 +2092,7 @@ static void isr_rxint(SLMP_INFO * info)

if (status2)
write_reg(info, SR2, status2);
-
+
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):%s isr_rxint status=%02X %02x\n",
__FILE__,__LINE__,info->device_name,status,status2);
@@ -4213,24 +4213,24 @@ static void tx_start(SLMP_INFO *info)

write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
-
+
/* set TX CDA (current descriptor address) */
write_reg16(info, TXDMA + CDA,
info->tx_buf_list_ex[0].phys_entry);
-
+
/* set TX EDA (last descriptor address) */
write_reg16(info, TXDMA + EDA,
info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
-
+
/* enable underrun IRQ */
info->ie1_value &= ~IDLE;
info->ie1_value |= UDRN;
write_reg(info, IE1, info->ie1_value);
write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
-
+
write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
-
+
mod_timer(&info->tx_timer, jiffies +
msecs_to_jiffies(5000));
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index df94cdbe0096..6e47e9a5e86d 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2701,7 +2701,7 @@ static int this_tty(const void *t, struct file *file, unsigned fd)
return 0;
return file_tty(file) != t ? 0 : fd + 1;
}
-
+
/*
* This implements the "Secure Attention Key" --- the idea is to
* prevent trojan horses by killing all processes associated with this
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index f9bcae2b7e36..56426611050d 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -832,7 +832,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
return set_termiox(real_tty, p, TERMIOS_WAIT);
case TCSETXF:
return set_termiox(real_tty, p, TERMIOS_FLUSH);
-#endif
+#endif
case TIOCGSOFTCAR:
copy_termios(real_tty, &kterm);
ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0,
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 97d02684b922..71086e4abc9a 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -71,7 +71,7 @@ static unsigned short translations[][256] = {
0x00e8, 0x00e9, 0x00ea, 0x00eb, 0x00ec, 0x00ed, 0x00ee, 0x00ef,
0x00f0, 0x00f1, 0x00f2, 0x00f3, 0x00f4, 0x00f5, 0x00f6, 0x00f7,
0x00f8, 0x00f9, 0x00fa, 0x00fb, 0x00fc, 0x00fd, 0x00fe, 0x00ff
- },
+ },
/* VT100 graphics mapped to Unicode */
{
0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
@@ -109,7 +109,7 @@ static unsigned short translations[][256] = {
},
/* IBM Codepage 437 mapped to Unicode */
{
- 0x0000, 0x263a, 0x263b, 0x2665, 0x2666, 0x2663, 0x2660, 0x2022,
+ 0x0000, 0x263a, 0x263b, 0x2665, 0x2666, 0x2663, 0x2660, 0x2022,
0x25d8, 0x25cb, 0x25d9, 0x2642, 0x2640, 0x266a, 0x266b, 0x263c,
0x25b6, 0x25c0, 0x2195, 0x203c, 0x00b6, 0x00a7, 0x25ac, 0x21a8,
0x2191, 0x2193, 0x2192, 0x2190, 0x221f, 0x2194, 0x25b2, 0x25bc,
@@ -141,7 +141,7 @@ static unsigned short translations[][256] = {
0x03a6, 0x0398, 0x03a9, 0x03b4, 0x221e, 0x03c6, 0x03b5, 0x2229,
0x2261, 0x00b1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00f7, 0x2248,
0x00b0, 0x2219, 0x00b7, 0x221a, 0x207f, 0x00b2, 0x25a0, 0x00a0
- },
+ },
/* User mapping -- default to codes for direct font mapping */
{
0xf000, 0xf001, 0xf002, 0xf003, 0xf004, 0xf005, 0xf006, 0xf007,
@@ -201,7 +201,7 @@ static void set_inverse_transl(struct vc_data *conp, struct uni_pagedir *p, int
int j, glyph;
unsigned short *t = translations[i];
unsigned char *q;
-
+
if (!p) return;
q = p->inverse_translations[i];

@@ -298,7 +298,7 @@ static void update_user_maps(void)
{
int i;
struct uni_pagedir *p, *q = NULL;
-
+
for (i = 0; i < MAX_NR_CONSOLES; i++) {
if (!vc_cons_allocated(i))
continue;
@@ -381,7 +381,7 @@ int con_get_trans_new(ushort __user * arg)
}

/*
- * Unicode -> current font conversion
+ * Unicode -> current font conversion
*
* A font has at most 512 chars, usually 256.
* But one font position may represent several Unicode chars.
@@ -398,7 +398,7 @@ static void con_release_unimap(struct uni_pagedir *p)
u16 **p1;
int i, j;

- if (p == dflt) dflt = NULL;
+ if (p == dflt) dflt = NULL;
for (i = 0; i < 32; i++) {
p1 = p->uni_pgdir[i];
if (p1 != NULL) {
@@ -430,12 +430,12 @@ void con_free_unimap(struct vc_data *vc)
con_release_unimap(p);
kfree(p);
}
-
+
static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p)
{
int i, j, k;
struct uni_pagedir *q;
-
+
for (i = 0; i < MAX_NR_CONSOLES; i++) {
if (!vc_cons_allocated(i))
continue;
@@ -494,7 +494,7 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
}

p2[unicode & 0x3f] = fontpos;
-
+
p->sum += (fontpos << 20) + unicode;

return 0;
@@ -532,7 +532,7 @@ int con_clear_unimap(struct vc_data *vc)
console_unlock();
return ret;
}
-
+
int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
{
int err = 0, err1, i;
@@ -556,17 +556,17 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)

goto out_unlock;
}
-
+
if (p->refcount > 1) {
int j, k;
u16 **p1, *p2, l;
-
+
err1 = con_do_clear_unimap(vc);
if (err1) {
err = err1;
goto out_unlock;
}
-
+
/*
* Since refcount was > 1, con_clear_unimap() allocated a
* a new uni_pagedir for this vc. Re: p != q
@@ -628,7 +628,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
if (err1)
err = err1;
}
-
+
/*
* Merge with fontmaps of any other virtual consoles.
*/
@@ -652,7 +652,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
* Loads the unimap for the hardware font, as defined in uni_hash.tbl.
* The representation used was the most compact I could come up
* with. This routine is executed at video setup, and when the
- * PIO_FONTRESET ioctl is called.
+ * PIO_FONTRESET ioctl is called.
*
* The caller must hold the console lock
*/
@@ -675,23 +675,23 @@ int con_set_default_unimap(struct vc_data *vc)
}
return 0;
}
-
+
/* The default font is always 256 characters */

err = con_do_clear_unimap(vc);
if (err)
return err;
-
+
p = *vc->vc_uni_pagedir_loc;
q = dfont_unitable;
-
+
for (i = 0; i < 256; i++)
for (j = dfont_unicount[i]; j; j--) {
err1 = con_insert_unipair(p, *(q++), i);
if (err1)
err = err1;
}
-
+
if (con_unify_unimap(vc, p)) {
dflt = *vc->vc_uni_pagedir_loc;
return err;
@@ -807,12 +807,12 @@ int conv_uni_to_8bit(u32 uni)
}

int
-conv_uni_to_pc(struct vc_data *conp, long ucs)
+conv_uni_to_pc(struct vc_data *conp, long ucs)
{
int h;
u16 **p1, *p2;
struct uni_pagedir *p;
-
+
/* Only 16-bit codes supported at this time */
if (ucs > 0xffff)
return -4; /* Not found */
@@ -827,7 +827,7 @@ conv_uni_to_pc(struct vc_data *conp, long ucs)
*/
else if ((ucs & ~UNI_DIRECT_MASK) == UNI_DIRECT_BASE)
return ucs & UNI_DIRECT_MASK;
-
+
if (!*conp->vc_uni_pagedir_loc)
return -3;

@@ -845,11 +845,11 @@ conv_uni_to_pc(struct vc_data *conp, long ucs)
* initialized. It must be possible to call kmalloc(..., GFP_KERNEL)
* from this function, hence the call from sys_setup.
*/
-void __init
+void __init
console_map_init(void)
{
int i;
-
+
for (i = 0; i < MAX_NR_CONSOLES; i++)
if (vc_cons_allocated(i) && !*vc_cons[i].d->vc_uni_pagedir_loc)
con_set_default_unimap(vc_cons[i].d);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 214ad559fd2d..4d044bc7122f 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1769,7 +1769,7 @@ int vt_do_diacrit(unsigned int cmd, void __user *udp, int perm)
ct * sizeof(struct kbdiacruc));
if (IS_ERR(buf))
return PTR_ERR(buf);
- }
+ }
spin_lock_irqsave(&kbd_event_lock, flags);
if (ct)
memcpy(accent_table, buf,
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 94131c746ef7..27f0f19a4c31 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -38,7 +38,7 @@
*
* - Arno Griffioen <arno@xxxxxx>
* - David Carter <carter@xxxxxxxxxxxxx>
- *
+ *
* The abstract console driver provides a generic interface for a text
* console. It supports VGA text mode, frame buffer based graphical consoles
* and special graphics processors that are only accessible through some
@@ -293,7 +293,7 @@ static inline bool con_should_update(const struct vc_data *vc)
static inline unsigned short *screenpos(struct vc_data *vc, int offset, int viewed)
{
unsigned short *p;
-
+
if (!viewed)
p = (unsigned short *)(vc->vc_origin + offset);
else if (!vc->vc_sw->con_screen_pos)
@@ -4380,9 +4380,9 @@ void reset_palette(struct vc_data *vc)
* Font switching
*
* Currently we only support fonts up to 32 pixels wide, at a maximum height
- * of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints,
- * depending on width) reserved for each character which is kinda wasty, but
- * this is done in order to maintain compatibility with the EGA/VGA fonts. It
+ * of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints,
+ * depending on width) reserved for each character which is kinda wasty, but
+ * this is done in order to maintain compatibility with the EGA/VGA fonts. It
* is up to the actual low-level console-driver convert data into its favorite
* format (maybe we should add a `fontoffset' field to the `display'
* structure so we won't have to convert the fontdata all the time.
@@ -4421,7 +4421,7 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
if (op->data && font.charcount > op->charcount)
rc = -ENOSPC;
if (!(op->flags & KD_FONT_FLAG_OLD)) {
- if (font.width > op->width || font.height > op->height)
+ if (font.width > op->width || font.height > op->height)
rc = -ENOSPC;
} else {
if (font.width != 8)
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 30e02ec5d6a0..801f2f6e1302 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -222,13 +222,13 @@ int vt_waitactive(int n)



-static inline int
+static inline int
do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op)
{
struct consolefontdesc cfdarg;
int i;

- if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
+ if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
return -EFAULT;

switch (cmd) {
@@ -262,7 +262,7 @@ do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struc
return -EINVAL;
}

-static inline int
+static inline int
do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_data *vc)
{
struct unimapdesc tmp;
@@ -328,7 +328,7 @@ static void vt_disallocate_all(void)

/*
* We handle the console-specific ioctl's here. We allow the
- * capability to modify any console, not just the fg_console.
+ * capability to modify any console, not just the fg_console.
*/
int vt_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
@@ -382,7 +382,7 @@ int vt_ioctl(struct tty_struct *tty,
return -EPERM;
{
unsigned int ticks, count;
-
+
/*
* Generate the tone for the appropriate number of ticks.
* If the time is zero, turn off sound ourselves.
@@ -433,11 +433,11 @@ int vt_ioctl(struct tty_struct *tty,
#endif

/* Linux m68k/i386 interface for setting the keyboard delay/repeat rate */
-
+
case KDKBDREP:
{
struct kbd_repeat kbrep;
-
+
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;

@@ -664,7 +664,7 @@ int vt_ioctl(struct tty_struct *tty,
if (! VT_IS_IN_USE(i))
break;
uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
- goto setint;
+ goto setint;

/*
* ioctl(fd, VT_ACTIVATE, num) will cause us to switch to vt # num,
--
2.17.1