[PATCH v4 6/8] input: stpmic1: add stpmic1 onkey driver

From: Pascal PAILLET-LME
Date: Thu Oct 18 2018 - 05:02:55 EST


From: pascal paillet <p.paillet@xxxxxx>

The stpmic1 pmic is able to manage an onkey button. This driver exposes
the stpmic1 onkey as an input device. It can also be configured to
shut-down the power supplies on a long key-press with an adjustable
duration.

Signed-off-by: pascal paillet <p.paillet@xxxxxx>
---
changes in v4:
* remove remove function
* merge stpmic1_onkey_dt_params() in probe function
* suppresse struct pmic_onkey_config
* rename PONKEY_PU_ACTIVE to PONKEY_PU_INACTIVE

drivers/input/misc/Kconfig | 11 +++
drivers/input/misc/Makefile | 2 +
drivers/input/misc/stpmic1_onkey.c | 197 +++++++++++++++++++++++++++++++++++++
3 files changed, 210 insertions(+)
create mode 100644 drivers/input/misc/stpmic1_onkey.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ca59a2b..279fb02 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA
To compile this driver as a module, choose M here. The module will
be called sc27xx_vibra.

+config INPUT_STPMIC1_ONKEY
+ tristate "STPMIC1 PMIC Onkey support"
+ depends on MFD_STPMIC1
+ help
+ Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
+ can be used to wakeup from low power modes and force a shut-down on
+ long press.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stpmic1_onkey.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 9d0f9d1..1b44202 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
+obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o
obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o
@@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
+
diff --git a/drivers/input/misc/stpmic1_onkey.c b/drivers/input/misc/stpmic1_onkey.c
new file mode 100644
index 0000000..6a7f08b
--- /dev/null
+++ b/drivers/input/misc/stpmic1_onkey.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@xxxxxx> for STMicroelectronics.
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+/**
+ * struct stpmic1_onkey - OnKey data
+ * @input_dev: pointer to input device
+ * @irq_falling: irq that we are hooked on to
+ * @irq_rising: irq that we are hooked on to
+ */
+struct stpmic1_onkey {
+ struct input_dev *input_dev;
+ int irq_falling;
+ int irq_rising;
+};
+
+static irqreturn_t onkey_falling_irq(int irq, void *ponkey)
+{
+ struct stpmic1_onkey *onkey = ponkey;
+ struct input_dev *input_dev = onkey->input_dev;
+
+ input_report_key(input_dev, KEY_POWER, 1);
+ pm_wakeup_event(input_dev->dev.parent, 0);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t onkey_rising_irq(int irq, void *ponkey)
+{
+ struct stpmic1_onkey *onkey = ponkey;
+ struct input_dev *input_dev = onkey->input_dev;
+
+ input_report_key(input_dev, KEY_POWER, 0);
+ pm_wakeup_event(input_dev->dev.parent, 0);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static int stpmic1_onkey_probe(struct platform_device *pdev)
+{
+ struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct input_dev *input_dev;
+ struct stpmic1_onkey *onkey;
+ unsigned int val, reg = 0;
+ int error;
+
+ onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+ if (!onkey)
+ return -ENOMEM;
+
+ onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling");
+ if (onkey->irq_falling < 0) {
+ dev_err(dev, "failed: request IRQ onkey-falling %d\n",
+ onkey->irq_falling);
+ return onkey->irq_falling;
+ }
+
+ onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising");
+ if (onkey->irq_rising < 0) {
+ dev_err(dev, "failed: request IRQ onkey-rising %d\n",
+ onkey->irq_rising);
+ return onkey->irq_rising;
+ }
+
+ if (!device_property_read_u32(dev, "power-off-time-sec", &val)) {
+ if ((val > 0) && (val <= 16)) {
+ dev_dbg(dev, "power-off-time=%d seconds\n", val);
+ reg |= PONKEY_PWR_OFF;
+ reg |= ((16 - val) & PONKEY_TURNOFF_TIMER_MASK);
+ } else {
+ dev_err(dev, "power-off-time-sec out of range\n");
+ return -EINVAL;
+ }
+ }
+
+ if (device_property_present(dev, "st,onkey-clear-cc-flag"))
+ reg |= PONKEY_CC_FLAG_CLEAR;
+
+ error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR,
+ PONKEY_TURNOFF_MASK, reg);
+ if (error) {
+ dev_err(dev, "PKEY_TURNOFF_CR write failed: %d\n", error);
+ return error;
+ }
+
+ if (device_property_present(dev, "st,onkey-pu-inactive")) {
+ error = regmap_update_bits(pmic->regmap, PADS_PULL_CR,
+ PONKEY_PU_INACTIVE,
+ PONKEY_PU_INACTIVE);
+ if (error) {
+ dev_err(dev, "ONKEY Pads configuration failed: %d\n", error);
+ return error;
+ }
+ }
+
+ input_dev = devm_input_allocate_device(dev);
+ if (!input_dev) {
+ dev_err(dev, "Can't allocate Pwr Onkey Input Device\n");
+ return -ENOMEM;
+ }
+
+ input_dev->name = "pmic_onkey";
+ input_dev->phys = "pmic_onkey/input0";
+
+ input_set_capability(input_dev, EV_KEY, KEY_POWER);
+
+ onkey->input_dev = input_dev;
+
+ /* interrupt is nested in a thread */
+ error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL,
+ onkey_falling_irq, IRQF_ONESHOT,
+ dev_name(dev), onkey);
+ if (error) {
+ dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error);
+ return error;
+ }
+
+ error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL,
+ onkey_rising_irq, IRQF_ONESHOT,
+ dev_name(dev), onkey);
+ if (error) {
+ dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(dev, "Can't register power button: %d\n", error);
+ return error;
+ }
+
+ platform_set_drvdata(pdev, onkey);
+ device_init_wakeup(dev, true);
+
+ return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev)) {
+ enable_irq_wake(onkey->irq_falling);
+ enable_irq_wake(onkey->irq_rising);
+ }
+ return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev)) {
+ disable_irq_wake(onkey->irq_falling);
+ disable_irq_wake(onkey->irq_rising);
+ }
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm,
+ stpmic1_onkey_suspend,
+ stpmic1_onkey_resume);
+
+static const struct of_device_id of_stpmic1_onkey_match[] = {
+ { .compatible = "st,stpmic1-onkey" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match);
+
+static struct platform_driver stpmic1_onkey_driver = {
+ .probe = stpmic1_onkey_probe,
+ .driver = {
+ .name = "stpmic1_onkey",
+ .of_match_table = of_match_ptr(of_stpmic1_onkey_match),
+ .pm = &stpmic1_onkey_pm,
+ },
+};
+module_platform_driver(stpmic1_onkey_driver);
+
+MODULE_DESCRIPTION("Onkey driver for STPMIC1");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@xxxxxx>");
+MODULE_LICENSE("GPL v2");
--
1.9.1