[PATCH 6/8] rapidio: consolidate RAPIDIO config entry in drivers/rapidio

From: Christoph Hellwig
Date: Wed Oct 17 2018 - 04:02:35 EST


There is no good reason to duplicate the RAPIDIO menu in various
architectures. Instead provide a selectable HAS_RAPIDIO symbol
that indicates native availability of RAPIDIO support and the handle
the rest in drivers/pci. This also means we now provide support
for PCI(e) to Rapidio bridges for every architecture instead of a
limited subset.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Acked-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---
arch/mips/Kconfig | 15 +--------------
arch/powerpc/Kconfig | 15 +--------------
arch/powerpc/platforms/85xx/Kconfig | 8 ++++----
arch/powerpc/platforms/86xx/Kconfig | 4 ++--
arch/x86/Kconfig | 10 ----------
drivers/Kconfig | 1 +
drivers/rapidio/Kconfig | 11 +++++++++++
7 files changed, 20 insertions(+), 44 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 18eeb66c6d99..96198f8375e1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -894,7 +894,7 @@ config CAVIUM_OCTEON_SOC
bool "Cavium Networks Octeon SoC based boards"
select CEVT_R4K
select ARCH_HAS_PHYS_TO_DMA
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
select PHYS_ADDR_T_64BIT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
@@ -3090,19 +3090,6 @@ config ZONE_DMA
config ZONE_DMA32
bool

-config HAS_RAPIDIO
- bool
- default n
-
-config RAPIDIO
- tristate "RapidIO support"
- depends on HAS_RAPIDIO || PCI
- help
- If you say Y here, the kernel will include drivers and
- infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
endmenu

config TRAD_SIGNALS
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6430aafe712f..ee28bb22732b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -963,27 +963,14 @@ config PCI_8260
select PPC_INDIRECT_PCI
default y

-config HAS_RAPIDIO
- bool
- default n
-
-config RAPIDIO
- tristate "RapidIO support"
- depends on HAS_RAPIDIO || PCI
- help
- If you say Y here, the kernel will include drivers and
- infrastructure code to support RapidIO interconnect devices.
-
config FSL_RIO
bool "Freescale Embedded SRIO Controller support"
- depends on RAPIDIO = y && HAS_RAPIDIO
+ depends on RAPIDIO = y && HAVE_RAPIDIO
default "n"
---help---
Include support for RapidIO controller on Freescale embedded
processors (MPC8548, MPC8641, etc).

-source "drivers/rapidio/Kconfig"
-
endmenu

config NONSTATIC_KERNEL
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 20867a23f3f2..1c6bb9180d70 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -65,7 +65,7 @@ config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
select PPC_I8259
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
help
This option enables support for the MPC85xx CDS board

@@ -73,7 +73,7 @@ config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
select PHYLIB if NETDEVICES
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
select SWIOTLB
help
This option enables support for the MPC85xx MDS board
@@ -218,7 +218,7 @@ config PPA8548
help
This option enables support for the Prodrive PPA8548 board.
select DEFAULT_UIMAGE
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO

config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
@@ -276,7 +276,7 @@ config CORENET_GENERIC
select SWIOTLB
select GPIOLIB
select GPIO_MPC8XXX
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the FSL CoreNet based boards.
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 87220554dd6f..badd9d6ba1ef 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -15,7 +15,7 @@ config MPC8641_HPCN
select PPC_I8259
select DEFAULT_UIMAGE
select FSL_ULI1575 if PCI
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
select SWIOTLB
help
This option enables support for the MPC8641 HPCN board.
@@ -57,7 +57,7 @@ config GEF_SBC610
select MMIO_NVRAM
select GPIOLIB
select GE_FPGA
- select HAS_RAPIDIO
+ select HAVE_RAPIDIO
help
This option enables support for the GE SBC610.

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fda01408b596..6fe3740018f6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2810,16 +2810,6 @@ config AMD_NB
def_bool y
depends on CPU_SUP_AMD && PCI

-config RAPIDIO
- tristate "RapidIO support"
- depends on PCI
- default n
- help
- If enabled this option will include drivers and the core
- infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
config X86_SYSFB
bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
help
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 58ee88c36cf5..065d308fcb00 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -6,6 +6,7 @@ menu "Device Drivers"
source "drivers/amba/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
+source "drivers/rapidio/Kconfig"


source "drivers/base/Kconfig"
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index d6d2f20c4597..e3d8fe41b50c 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -1,6 +1,17 @@
#
# RapidIO configuration
#
+
+config HAVE_RAPIDIO
+ bool
+
+menuconfig RAPIDIO
+ tristate "RapidIO support"
+ depends on HAVE_RAPIDIO || PCI
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
source "drivers/rapidio/devices/Kconfig"

config RAPIDIO_DISC_TIMEOUT
--
2.19.1