[[PATCH] 8/9] DMA-UART-Driver-for-AST2500

From: sudheer.v
Date: Wed Oct 17 2018 - 00:08:54 EST


Signed-off-by: sudheer.v <open.sudheer@xxxxxxxxx>
---
drivers/tty/serial/8250/8250_aspeed_uart_dma.c | 1594 ++++++++++++++++++++++++
1 file changed, 1594 insertions(+)
create mode 100644 drivers/tty/serial/8250/8250_aspeed_uart_dma.c

diff --git a/drivers/tty/serial/8250/8250_aspeed_uart_dma.c b/drivers/tty/serial/8250/8250_aspeed_uart_dma.c
new file mode 100644
index 0000000..e1019a8
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_aspeed_uart_dma.c
@@ -0,0 +1,1594 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/tty/serial/8250/8250_aspeed_uart_dma.c
+ * 1. 2018/07/01 Shivah Shankar created
+ * 2. 2018/08/25 sudheer.veliseti<open.sudheer@xxxxxxxxx> modified
+ *
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include<linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/nmi.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+
+#include "8250.h"
+#include <linux/dma-mapping.h>
+#define SDMA_RX_BUFF_SIZE 0x10000 //65536
+#define DMA_BUFF_SIZE 0x1000 //4096
+
+
+
+
+#undef UART_XMIT_SIZE
+#define UART_XMIT_SIZE 0x1000
+#define UART_RX_SIZE 0x10000
+
+#ifdef UART_DMA_DEBUG
+ #define UART_DBG(fmt, args...) pr_debug("%s() " fmt, __func__, ## args)
+#else
+ #define UART_DBG(fmt, args...)
+#endif
+
+#ifdef CONFIG_UART_TX_DMA_DEBUG
+ #define UART_TX_DBG(fmt, args...) pr_debug("%s()"fmt, __func__, ## args)
+#else
+ #define UART_TX_DBG(fmt, args...)
+#endif
+
+/*
+ * Configuration:
+ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
+ * is unsafe when used on edge-triggered interrupts.
+ */
+static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
+
+static unsigned int nr_uarts = CONFIG_AST_RUNTIME_DMA_UARTS;
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) UART_DBG(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) UART_DBG(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 256
+
+#include <asm/serial.h>
+
+
+#define UART_DMA_NR CONFIG_AST_NR_DMA_UARTS
+
+struct ast_uart_port {
+ struct uart_port port;
+ struct platform_device *pdev;
+ unsigned short capabilities; /* port capabilities */
+ unsigned short bugs; /* port bugs */
+ unsigned int tx_loadsz; /* transmit fifo load size */
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned int channel_no;
+ struct scatterlist rx_sgl;
+ struct dma_chan *rx_dma_chan;
+ struct circ_buf rx_dma_buf;
+ dma_addr_t dma_rx_addr;
+ u8 rx_in_progress;
+ struct dma_async_tx_descriptor *rx_dma_desc;
+ dma_cookie_t rx_cookie;
+ unsigned int rx_bytes_requested;
+ unsigned int rx_bytes_transferred;
+ struct tasklet_struct rx_tasklet;
+ struct scatterlist tx_sgl;
+ struct dma_chan *tx_dma_chan;
+ struct circ_buf tx_dma_buf;
+ dma_addr_t dma_tx_addr;
+ u8 tx_in_progress;
+ struct dma_async_tx_descriptor *tx_dma_desc;
+ dma_cookie_t tx_cookie;
+ unsigned int tx_bytes_requested;
+ unsigned int tx_bytes_transferred;
+ struct tasklet_struct tx_tasklet;
+ spinlock_t lock;
+ int tx_done;
+ int tx_count;
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+ unsigned char lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+ unsigned char msr_saved_flags;
+
+ /*
+ * We provide a per-port pm hook.
+ */
+ void (*pm)(struct uart_port *port,
+ unsigned int state, unsigned int old);
+};
+
+static struct ast_uart_port ast_uart_ports[UART_DMA_NR];
+
+static int ast_dma_channel_setup(struct ast_uart_port *up);
+static inline struct ast_uart_port *
+to_ast_dma_uart_port(struct uart_port *uart)
+{
+ return container_of(uart, struct ast_uart_port, port);
+}
+
+struct irq_info {
+ spinlock_t lock;
+ struct ast_uart_port *up;
+};
+
+static void ast_dma_channel_teardown(struct ast_uart_port *s);
+static struct irq_info ast_uart_irq[1];
+static DEFINE_MUTEX(ast_uart_mutex);
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial8250_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_8250] = {
+ .name = "8250",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16450] = {
+ .name = "16450",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550] = {
+ .name = "16550",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550A] = {
+ .name = "16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10
+ | UART_FCR_DMA_SELECT,
+ .flags = UART_CAP_FIFO,
+ },
+};
+
+/* sane hardware needs no mapping */
+#define map_8250_in_reg(up, offset) (offset)
+#define map_8250_out_reg(up, offset) (offset)
+
+static void ast_uart_unregister_port(int line);
+static int ast_uart_register_port(struct uart_port *port,
+ unsigned int channel_no);
+
+static unsigned int ast_serial_in(struct ast_uart_port *up, int offset)
+{
+ offset = map_8250_in_reg(up, offset) << up->port.regshift;
+
+ return readb(up->port.membase + offset);
+}
+
+static void
+ast_serial_out(struct ast_uart_port *up, int offset, int value)
+{
+ /* Save the offset before it's remapped */
+ offset = map_8250_out_reg(up, offset) << up->port.regshift;
+
+ writeb(value, up->port.membase + offset);
+}
+
+
+/*
+ * We used to support using pause I/O for certain machines. We
+ * haven't supported this for a while, but just in case it's badly
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
+#define serial_inp(up, offset) ast_serial_in(up, offset)
+#define serial_outp(up, offset, value) ast_serial_out(up, offset, value)
+
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct ast_uart_port *up)
+{
+ return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct ast_uart_port *up, int value)
+{
+ serial_outp(up, UART_DLL, value & 0xff);
+ serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+
+static void ast_uart_tx_dma_complete(void *args);
+
+static int ast_uart_start_tx_dma(struct ast_uart_port *up,
+ unsigned long count)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ dma_addr_t tx_phys_addr;
+
+ UART_DBG("Entered %s count is %d\n", __func__, count);
+ UART_DBG("up->tx_cookie = %d\n", up->tx_cookie);
+ if (up->tx_cookie == 0) {
+ dma_sync_single_for_device(up->port.dev, up->dma_tx_addr,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ tx_phys_addr = up->dma_tx_addr + xmit->tail;
+ UART_DBG("Transmit address is %x actual is %x\n", tx_phys_addr,
+ up->dma_tx_addr);
+ up->tx_dma_desc = dmaengine_prep_slave_single(up->tx_dma_chan,
+ tx_phys_addr, count, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
+ if (!up->tx_dma_desc) {
+ dev_err(up->port.dev, "Not able to get desc for Tx\n");
+ return -EIO;
+ }
+
+ up->tx_dma_desc->callback = ast_uart_tx_dma_complete;
+ up->tx_dma_desc->callback_param = up;
+ up->tx_in_progress = 1;
+ up->tx_bytes_requested = count;
+ up->tx_bytes_transferred = 0;
+ up->tx_cookie = dmaengine_submit(up->tx_dma_desc);
+ }
+ dma_async_issue_pending(up->tx_dma_chan);
+ return 0;
+}
+static void ast_uart_start_next_tx(struct ast_uart_port *up)
+{
+ unsigned long count;
+ struct circ_buf *xmit = &up->port.state->xmit;
+
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ if (count)
+ ast_uart_start_tx_dma(up, count);
+}
+static void ast_uart_tx_sdma_tasklet_func(unsigned long data)
+{
+ struct ast_uart_port *up = ((struct ast_uart_port *)data);
+ struct circ_buf *xmit = &up->port.state->xmit;
+ unsigned long flags = 0;
+
+ UART_DBG("In %s bytes to send is %d\n", __func__, CIRC_CNT(xmit->head,
+ spin_lock_irqsave(&up->port.lock, flags);
+ xmit->tail, UART_XMIT_SIZE));
+ if (!uart_circ_empty(xmit) && !up->tx_in_progress) {
+ UART_DBG("Calling ast_uart_start_next_tx\n");
+ ast_uart_start_next_tx(up);
+ }
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void ast_uart_tx_dma_complete(void *args)
+{
+ struct ast_uart_port *up = args;
+ struct circ_buf *xmit = &up->port.state->xmit;
+ struct dma_tx_state state;
+ unsigned long flags;
+ unsigned int count;
+ enum dma_status status;
+
+ status = dmaengine_tx_status(up->tx_dma_chan, up->tx_cookie, &state);
+ UART_DBG("%s:state.residue=%d\n", __func__, state.residue);
+ UART_DBG("up->tx_bytes_requested=%d up->tx_bytes_transferred=%d\n",
+ up->tx_bytes_requested, up->tx_bytes_transferred);
+ if (status == DMA_COMPLETE) {
+ up->tx_cookie = 0;
+ count = up->tx_bytes_requested - up->tx_bytes_transferred;
+ UART_DBG("DMA_COMPLETE:bytes till end of Buffer=%d\n", count);
+ } else{
+ count = up->tx_bytes_requested - state.residue;
+ up->tx_bytes_transferred += count;
+ UART_DBG("DMA_not_COMPLETE: count=%d\n", count);
+ }
+ UART_DBG("up->tx_bytes_requested=%d up->tx_bytes_transferred=%d\n",
+ up->tx_bytes_requested, up->tx_bytes_transferred);
+ UART_DBG("xmit->head=%d and xmit->tail=%d\n", xmit->head, xmit->tail);
+ async_tx_ack(up->tx_dma_desc);
+ spin_lock_irqsave(&up->port.lock, flags);
+ xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+ up->tx_in_progress = 0;
+ UART_DBG("updated xmit->head=%d and xmit->tail=%d\n",
+ xmit->head, xmit->tail);
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+ ast_uart_start_next_tx(up);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void ast_uart_rx_sdma_tasklet_func(unsigned long data);
+static void ast_uart_rx_dma_complete(void *args)
+{
+ struct ast_uart_port *up = args;
+ struct dma_tx_state state;
+ struct circ_buf *rx_ring = &up->rx_dma_buf;
+ unsigned int count;
+ unsigned int temp = 0;
+ enum dma_status status;
+
+ UART_DBG("line [%d],head = %d, len : %d\n",
+ up->port.line, up->rx_dma_buf.head, count);
+ status = dmaengine_tx_status(up->rx_dma_chan, up->rx_cookie, &state);
+ UART_DBG("Freespace in buffer=%d\n", state.residue);
+ UART_DBG("up->rx_bytes_requested=%d up->rx_bytes_transferred=%d\n",
+ up->rx_bytes_requested, up->rx_bytes_transferred);
+ if (status == DMA_COMPLETE) {
+ up->rx_cookie = 0;
+ count = up->rx_bytes_requested - up->rx_bytes_transferred;
+ up->rx_in_progress = 0;
+ UART_DBG("DMA_COMPLETE:bytes till end of Buffer=%d\n", count);
+ } else{
+ temp = up->rx_bytes_requested - state.residue;
+ count = temp - up->rx_bytes_transferred;
+ up->rx_bytes_transferred = temp;
+ UART_DBG("DMA_not_COMPLETE:fill index =%d\n", temp, count);
+ UART_DBG("bytes to be rxed in current lap=%d\n", count);
+ UART_DBG("rx_bytes_transfred=%d\n", up->rx_bytes_transferred);
+ }
+
+ UART_DBG("rx_ring->head=%d rx_ring->tail=%d\n",
+ rx_ring->head, rx_ring->tail);
+ rx_ring->head = (rx_ring->head + count) & (UART_RX_SIZE - 1);
+ UART_DBG("updated rx_ring->head=%d rx_ring->tail=%d\n",
+ rx_ring->head, rx_ring->tail);
+ ast_uart_rx_sdma_tasklet_func((unsigned long)up);
+}
+
+static int ast_uart_start_rx_dma(struct ast_uart_port *up,
+ unsigned long count)
+{
+ struct circ_buf *rx_ring = &up->rx_dma_buf;
+ dma_addr_t rx_phys_addr;
+
+ UART_DBG("%s:up->rx_dma_chan= %d\n", __func__, up->rx_dma_chan);
+ UART_DBG("up->rx_cookie = %d\n", up->rx_cookie);
+ if (up->rx_cookie == 0) {
+ dma_sync_single_for_device(up->port.dev, up->dma_rx_addr,
+ UART_RX_SIZE, DMA_FROM_DEVICE);
+ rx_phys_addr = up->dma_rx_addr + rx_ring->tail;
+ up->rx_dma_desc = dmaengine_prep_slave_single(up->rx_dma_chan,
+ rx_phys_addr, UART_RX_SIZE, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+ if (!up->rx_dma_desc) {
+ dev_err(up->port.dev, "Not able to get desc for Rx\n");
+ return -EIO;
+ }
+ up->rx_dma_desc->callback = ast_uart_rx_dma_complete;
+ up->rx_dma_desc->callback_param = up;
+ up->rx_in_progress = 1;
+ up->rx_bytes_requested = UART_RX_SIZE;
+ up->rx_bytes_transferred = 0;
+ up->rx_cookie = dmaengine_submit(up->rx_dma_desc);
+ }
+ dma_async_issue_pending(up->rx_dma_chan);
+ return 0;
+}
+
+static void ast_uart_rx_sdma_tasklet_func(unsigned long data)
+{
+ struct ast_uart_port *up = ((struct ast_uart_port *)data);
+ struct tty_port *port = &up->port.state->port;
+ struct circ_buf *rx_ring = &up->rx_dma_buf;
+ unsigned long flags;
+ int count;
+ int copy = 0;
+
+ UART_DBG("line [%d], rx_ring->head = %d, rx_ring->tail = %d\n",
+ up->port.line, rx_ring->head, rx_ring->tail);
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (rx_ring->head > rx_ring->tail) {
+ count = rx_ring->head - rx_ring->tail;
+ UART_DBG("^^^^ count=%d rx_ring->head=%d rx_ring->tail=%d\n",
+ count, rx_ring->head, rx_ring->tail);
+ copy = tty_insert_flip_string(port,
+ rx_ring->buf + rx_ring->tail, count);
+ } else if (rx_ring->head < rx_ring->tail) {
+ count = SDMA_RX_BUFF_SIZE - rx_ring->tail;
+ UART_DBG("rollovr:count=%d rx_ring->head=%d rx_ring->tail=%d\n",
+ count, rx_ring->head, rx_ring->tail);
+ copy = tty_insert_flip_string(port,
+ rx_ring->buf + rx_ring->tail, count);
+ } else {
+ count = 0;
+ }
+ if (copy != count)
+ UART_DBG("!!!!!!!! ERROR 111\n");
+ if (count) {
+ UART_DBG("count = %d\n", count);
+ rx_ring->tail += count;
+ rx_ring->tail &= (SDMA_RX_BUFF_SIZE - 1);
+ up->port.icount.rx += count;
+ tty_flip_buffer_push(port);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ ast_uart_start_rx_dma(up, count);
+ spin_lock_irqsave(&up->port.lock, flags);
+ }
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * FIFO support.
+ */
+static inline void serial8250_clear_fifos(struct ast_uart_port *p)
+{
+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(p, UART_FCR, 0);
+}
+
+/*
+ * This routine is called by rs_init() to initialize a specific serial
+ * port.
+ */
+static void autoconfig(struct ast_uart_port *up)
+{
+ unsigned long flags;
+
+ UART_DBG("line [%d]\n", up->port.line);
+ if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
+ return;
+
+ DEBUG_AUTOCONF("ttyDMA%d: autoconf (0x%04x, 0x%p): ",
+ up->port.line, up->port.iobase, up->port.membase);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->capabilities = 0;
+ up->bugs = 0;
+
+ up->port.type = PORT_16550A;
+ up->capabilities |= UART_CAP_FIFO;
+
+ up->port.fifosize = uart_config[up->port.type].fifo_size;
+ up->capabilities = uart_config[up->port.type].flags;
+ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+
+ if (up->port.type == PORT_UNKNOWN)
+ goto out;
+
+ /*
+ * Reset the UART.
+ */
+ serial8250_clear_fifos(up);
+ ast_serial_in(up, UART_RX);
+ serial_outp(up, UART_IER, 0);
+
+ out:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
+}
+
+
+static inline void __stop_tx(struct ast_uart_port *p)
+{
+ if (p->ier & UART_IER_THRI) {
+ p->ier &= ~UART_IER_THRI;
+ ast_serial_out(p, UART_IER, p->ier);
+ }
+}
+
+static void serial8250_stop_tx(struct uart_port *port)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ struct circ_buf *xmit = &up->port.state->xmit;
+ struct dma_tx_state state;
+ unsigned int count;
+
+ __stop_tx(up);
+ if (!up->tx_in_progress)
+ return;
+ dmaengine_terminate_all(up->tx_dma_chan);
+ dmaengine_tx_status(up->tx_dma_chan, up->tx_cookie, &state);
+ count = up->tx_bytes_requested - state.residue;
+ async_tx_ack(up->tx_dma_desc);
+ xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+ up->tx_in_progress = 0;
+}
+
+static void transmit_chars(struct ast_uart_port *up);
+
+static void serial8250_start_tx(struct uart_port *port)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ struct circ_buf *xmit = &up->port.state->xmit;
+
+ UART_DBG("\n%s:line %d", __func__, port->line);
+ UART_TX_DBG("line [%d]\n", port->line);
+ if (!uart_circ_empty(xmit) && !up->tx_in_progress) {
+ UART_DBG("Calling ast_uart_start_next_tx\n");
+ ast_uart_start_next_tx(up);
+ }
+}
+
+static void serial8250_stop_rx(struct uart_port *port)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ struct dma_tx_state state;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ ast_serial_out(up, UART_IER, up->ier);
+ if (!up->rx_in_progress)
+ return;
+ dmaengine_terminate_all(up->rx_dma_chan);
+ dmaengine_tx_status(up->rx_dma_chan, up->rx_cookie, &state);
+ up->rx_in_progress = 0;
+ up->rx_bytes_transferred = 0;
+}
+
+static void serial8250_enable_ms(struct uart_port *port)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+
+ UART_DBG("line [%d]\n", port->line);
+ up->ier |= UART_IER_MSI;
+ ast_serial_out(up, UART_IER, up->ier);
+}
+
+static void transmit_chars(struct ast_uart_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_outp(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_tx_stopped(&up->port)) {
+ serial8250_stop_tx(&up->port);
+ return;
+ }
+ if (uart_circ_empty(xmit)) {
+ __stop_tx(up);
+ return;
+ }
+
+ count = up->tx_loadsz;
+ do {
+ ast_serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ __stop_tx(up);
+}
+
+static unsigned int check_modem_status(struct ast_uart_port *up)
+{
+ unsigned int status = ast_serial_in(up, UART_MSR);
+
+ UART_DBG("line [%d]\n", up->port.line);
+ status |= up->msr_saved_flags;
+ up->msr_saved_flags = 0;
+ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
+ up->port.state != NULL) {
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port,
+ status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port,
+ status & UART_MSR_CTS);
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+ }
+ return status;
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void
+serial8250_handle_port(struct ast_uart_port *up)
+{
+ unsigned int status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ status = serial_inp(up, UART_LSR);
+
+ DEBUG_INTR("status = %x...", status);
+
+ check_modem_status(up);
+ if (status & UART_LSR_THRE)
+ transmit_chars(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ */
+static irqreturn_t ast_uart_interrupt(int irq, void *dev_id)
+{
+ struct irq_info *i = dev_id;
+ int pass_counter = 0, handled = 0, end = 0;
+
+ DEBUG_INTR("(%d) ", irq);
+ spin_lock(&i->lock);
+ do {
+ struct ast_uart_port *up;
+ unsigned int iir;
+
+ up = (struct ast_uart_port *)(i->up);
+ iir = ast_serial_in(up, UART_IIR);
+ if (!(iir & UART_IIR_NO_INT)) {
+ serial8250_handle_port(up);
+ handled = 1;
+ } else
+ end = 1;
+
+ if (pass_counter++ > PASS_LIMIT) {
+ /* If we hit this, we're dead. */
+ UART_DBG(KERN_ERR
+ "ast-uart-dma:too much work for irqi%d", irq);
+ break;
+ }
+ } while (end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+static unsigned int serial8250_tx_empty(struct uart_port *port)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ unsigned long flags;
+ unsigned int lsr;
+
+ UART_TX_DBG("line [%d]\n", up->port.line);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ lsr = ast_serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int serial8250_get_mctrl(struct uart_port *port)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ unsigned int status;
+ unsigned int ret;
+
+ status = check_modem_status(up);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ unsigned char mcr = 0;
+ //UART_DBG("serial8250_set_mctrl %x\n",mctrl);
+ //TODO .... Issue for fix ......
+ mctrl = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
+
+ ast_serial_out(up, UART_MCR, mcr);
+}
+
+static void serial8250_break_ctl(struct uart_port *port, int break_state)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ ast_serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int serial8250_startup(struct uart_port *port)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ //TX DMA
+ struct circ_buf *xmit = &up->port.state->xmit;
+ unsigned long flags;
+ unsigned char lsr, iir;
+ int retval;
+ struct dma_slave_config dma_sconfig;
+ int irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+
+ up->capabilities = uart_config[up->port.type].flags;
+ up->mcr = 0;
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial8250_clear_fifos(up);
+ UART_DBG("1: line [%d]\n", port->line);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_inp(up, UART_LSR);
+ (void) serial_inp(up, UART_RX);
+ (void) serial_inp(up, UART_IIR);
+ (void) serial_inp(up, UART_MSR);
+
+ ast_uart_irq[0].up = up;
+ retval = request_irq(up->port.irq, ast_uart_interrupt,
+ irq_flags, "ast-uart-dma", ast_uart_irq);
+ if (retval)
+ return retval;
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl |= TIOCM_OUT2;
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+
+ /*
+ * Do a quick test to see if we receive an
+ * interrupt when we enable the TX irq.
+ */
+ serial_outp(up, UART_IER, UART_IER_THRI);
+ lsr = ast_serial_in(up, UART_LSR);
+ iir = ast_serial_in(up, UART_IIR);
+ serial_outp(up, UART_IER, 0);
+
+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
+ if (!(up->bugs & UART_BUG_TXEN)) {
+ up->bugs |= UART_BUG_TXEN;
+ UART_DBG("ttyDMA%d - enabling bad tx status\n",
+ port->line);
+ }
+ } else {
+ up->bugs &= ~UART_BUG_TXEN;
+ }
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Clear the interrupt registers again for luck, and clear the
+ * saved flags to avoid getting false values from polling
+ * routines or the previous session.
+ */
+ serial_inp(up, UART_LSR);
+ serial_inp(up, UART_RX);
+ serial_inp(up, UART_IIR);
+ serial_inp(up, UART_MSR);
+ up->lsr_saved_flags = 0;
+ up->msr_saved_flags = 0;
+
+ //RX DMA
+ up->rx_dma_buf.head = 0;
+ up->rx_dma_buf.tail = 0;
+ up->port.icount.rx = 0;
+ ast_dma_channel_setup(up);
+ up->rx_dma_buf.buf = dma_alloc_coherent(port->dev, UART_RX_SIZE,
+ &up->dma_rx_addr, GFP_KERNEL);
+ if (!up->rx_dma_buf.buf)
+ ast_dma_channel_teardown(up);
+#if 1
+ memset(&dma_sconfig, 0, sizeof(struct dma_slave_config));
+ dma_sconfig.dst_addr = up->dma_rx_addr;
+ dma_sconfig.dst_port_window_size = UART_RX_SIZE;
+ dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.dst_maxburst = 4;
+ dma_sconfig.slave_id = up->channel_no;
+
+ dmaengine_slave_config(up->rx_dma_chan, &dma_sconfig);
+
+ //ast_uart_start_rx_dma(up, UART_RX_SIZE);
+ dma_sync_single_for_device(up->port.dev, up->dma_rx_addr,
+ UART_RX_SIZE, DMA_FROM_DEVICE);
+
+ up->rx_dma_desc = dmaengine_prep_slave_single(up->rx_dma_chan,
+ up->dma_rx_addr, UART_RX_SIZE, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ if (!up->rx_dma_desc) {
+ dev_err(up->port.dev, "Not able to get desc for Rx\n");
+ return -EIO;
+ }
+ up->rx_dma_desc->callback = ast_uart_rx_dma_complete;
+ up->rx_dma_desc->callback_param = up;
+ up->rx_in_progress = 1;
+ up->rx_bytes_requested = UART_RX_SIZE;
+ up->rx_cookie = dmaengine_submit(up->rx_dma_desc);
+#endif
+
+ memset(&dma_sconfig, 0, sizeof(struct dma_slave_config));
+
+ up->tx_done = 1;
+ up->tx_count = 0;
+ up->tx_dma_buf.head = 0;
+ up->tx_dma_buf.tail = 0;
+ up->tx_dma_buf.buf = xmit->buf;
+ UART_DBG("head:0x%x tail:0x%x\n", xmit->head, xmit->tail);
+ xmit->head = 0;
+ xmit->tail = 0;
+
+ up->dma_tx_addr = dma_map_single(port->dev,
+ up->tx_dma_buf.buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+#if 1
+ dma_sconfig.src_addr = up->dma_tx_addr;
+ dma_sconfig.src_port_window_size = UART_XMIT_SIZE;
+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.src_maxburst = 4;
+ dma_sconfig.slave_id = up->channel_no;
+ dmaengine_slave_config(up->tx_dma_chan, &dma_sconfig);
+#endif
+ //STOP and TRIGGER is done in SDMA driver
+ return 0;
+}
+
+static void serial8250_shutdown(struct uart_port *port)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ unsigned long flags;
+
+ up->ier = 0;
+ serial_outp(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl &= ~TIOCM_OUT2;
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ ast_serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
+ serial8250_clear_fifos(up);
+
+ (void) ast_serial_in(up, UART_RX);
+
+ up->rx_in_progress = 0;
+ up->tx_in_progress = 0;
+ dma_release_channel(up->rx_dma_chan);
+ dma_release_channel(up->tx_dma_chan);
+ dma_free_coherent(port->dev, UART_RX_SIZE,
+ up->rx_dma_buf.buf, up->dma_rx_addr);
+ dma_unmap_single(port->dev, up->dma_tx_addr,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ up->rx_dma_chan = NULL;
+ up->tx_dma_chan = NULL;
+ up->dma_rx_addr = 0;
+ up->dma_rx_addr = 0;
+ //Tx buffer will free by serial_core.c
+ free_irq(up->port.irq, ast_uart_irq);
+}
+
+static unsigned int serial8250_get_divisor(struct uart_port *port,
+ unsigned int baud)
+{
+ unsigned int quot;
+
+ quot = uart_get_divisor(port, baud);
+ return quot;
+}
+
+static void
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct ast_uart_port *up = to_ast_dma_uart_port(port);
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = serial8250_get_divisor(port, baud);
+
+ if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
+ if (baud < 2400)
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+ else
+ fcr = uart_config[up->port.type].fcr;
+ }
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ ast_serial_out(up, UART_IER, up->ier);
+
+
+ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+
+ serial_dl_write(up, quot);
+
+ /*
+ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+ * is written without DLAB set, this mode will be disabled.
+ */
+
+ serial_outp(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ if (fcr & UART_FCR_ENABLE_FIFO) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ }
+ serial_outp(up, UART_FCR, fcr); /* set fcr */
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct ast_uart_port *p = (struct ast_uart_port *)port;
+
+ if (p->pm)
+ p->pm(port, state, oldstate);
+}
+
+/*
+ * Resource handling.
+ */
+static int serial8250_request_std_resource(struct ast_uart_port *up)
+{
+ unsigned int size = 8 << up->port.regshift;
+ int ret = 0;
+
+ if (!up->port.mapbase)
+ return ret;
+
+ if (!request_mem_region(up->port.mapbase, size, "ast-uart-dma")) {
+ ret = -EBUSY;
+ return ret;
+ }
+
+ if (up->port.flags & UPF_IOREMAP) {
+ up->port.membase = ioremap_nocache(up->port.mapbase, size);
+ if (!up->port.membase) {
+ release_mem_region(up->port.mapbase, size);
+ ret = -ENOMEM;
+ return ret;
+ }
+ }
+ return ret;
+}
+
+static void serial8250_release_std_resource(struct ast_uart_port *up)
+{
+ unsigned int size = 8 << up->port.regshift;
+
+ if (!up->port.mapbase)
+ return;
+
+ if (up->port.flags & UPF_IOREMAP) {
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+ }
+
+ release_mem_region(up->port.mapbase, size);
+}
+
+
+static void serial8250_release_port(struct uart_port *port)
+{
+ struct ast_uart_port *up = (struct ast_uart_port *)port;
+
+ serial8250_release_std_resource(up);
+}
+
+static int serial8250_request_port(struct uart_port *port)
+{
+ struct ast_uart_port *up = (struct ast_uart_port *)port;
+ int ret = 0;
+
+ ret = serial8250_request_std_resource(up);
+ if (ret == 0)
+ serial8250_release_std_resource(up);
+
+ return ret;
+}
+
+static void serial8250_config_port(struct uart_port *port, int flags)
+{
+ struct ast_uart_port *up = (struct ast_uart_port *)port;
+ int ret;
+
+ /*
+ * Find the region that we can probe for. This in turn
+ * tells us whether we can probe for the type of port.
+ */
+ ret = serial8250_request_std_resource(up);
+ if (ret < 0)
+ return;
+
+ if (flags & UART_CONFIG_TYPE)
+ autoconfig(up);
+
+ if (up->port.type == PORT_UNKNOWN)
+ serial8250_release_std_resource(up);
+}
+
+static int
+serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return 0;
+}
+
+static const char *
+serial8250_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static const struct uart_ops serial8250_pops = {
+ .tx_empty = serial8250_tx_empty,
+ .set_mctrl = serial8250_set_mctrl,
+ .get_mctrl = serial8250_get_mctrl,
+ .stop_tx = serial8250_stop_tx,
+ .start_tx = serial8250_start_tx,
+ .stop_rx = serial8250_stop_rx,
+ .enable_ms = serial8250_enable_ms,
+ .break_ctl = serial8250_break_ctl,
+ .startup = serial8250_startup,
+ .shutdown = serial8250_shutdown,
+ .set_termios = serial8250_set_termios,
+ .pm = serial8250_pm,
+ .type = serial8250_type,
+ .release_port = serial8250_release_port,
+ .request_port = serial8250_request_port,
+ .config_port = serial8250_config_port,
+ .verify_port = serial8250_verify_port,
+};
+
+static void __init serial8250_isa_init_ports(void)
+{
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct ast_uart_port *up = &ast_uart_ports[i];
+
+ up->port.line = i;
+ spin_lock_init(&up->port.lock);
+
+ /*
+ * ALPHA_KLUDGE_MCR needs to be killed.
+ */
+ up->mcr_mask = ~ALPHA_KLUDGE_MCR;
+ up->mcr_force = ALPHA_KLUDGE_MCR;
+
+ up->port.ops = &serial8250_pops;
+ }
+
+}
+
+static void __init
+serial8250_register_ports(struct uart_driver *drv, struct device *dev)
+{
+ int i;
+ struct ast_uart_port *up = NULL;
+
+ serial8250_isa_init_ports();
+ for (i = 0; i < nr_uarts; i++) {
+ up = &ast_uart_ports[i];
+ up->port.dev = dev;
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#define SERIAL8250_CONSOLE NULL
+
+static struct uart_driver serial8250_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ast-uart-dma",
+ .dev_name = "ttyDMA",
+#if 0
+ .major = TTY_MAJOR,
+ .minor = 64,
+#else
+ .major = 204, // like atmel_serial
+ .minor = 155,
+#endif
+ .nr = UART_DMA_NR,
+ .cons = SERIAL8250_CONSOLE,
+};
+
+static void ast_dma_channel_teardown(struct ast_uart_port *s)
+{
+ UART_DBG("Teardown called\n");
+ if (s->tx_dma_chan) {
+ dma_release_channel(s->tx_dma_chan);
+ s->tx_dma_chan = NULL;
+ }
+ if (s->rx_dma_chan) {
+ dma_release_channel(s->rx_dma_chan);
+ s->rx_dma_chan = NULL;
+ }
+
+}
+static int ast_dma_channel_setup(struct ast_uart_port *up)
+{
+ up->rx_dma_chan = dma_request_slave_channel(up->port.dev, "rx");
+ UART_DBG("Entered %s ptr is %p\n", __func__, up->rx_dma_chan);
+ if (!up->rx_dma_chan)
+ goto err_out;
+
+ up->tx_dma_chan = dma_request_slave_channel(up->port.dev, "tx");
+ UART_DBG("Entered %s ptr is %p\n", __func__, up->tx_dma_chan);
+ if (!up->tx_dma_chan)
+ goto err_out;
+
+ return 0;
+err_out:
+ ast_dma_channel_teardown(up);
+ return -EINVAL;
+}
+
+/*
+ * Register a set of serial devices attached to a platform device. The
+ * list is terminated with a zero flags entry, which means we expect
+ * all entries to have at least UPF_BOOT_AUTOCONF set.
+ */
+struct clk *clk;
+static int serial8250_probe(struct platform_device *dev)
+{
+ struct device_node *np = dev->dev.of_node;
+ struct uart_port port;
+ int ret;
+ u32 read = 0;
+ struct resource *res = 0;
+
+ if (UART_XMIT_SIZE > DMA_BUFF_SIZE)
+ UART_DBG("UART_XMIT_SIZE > DMA_BUFF_SIZE : Please Check\n");
+ memset(&port, 0, sizeof(struct uart_port));
+
+ port.irq = platform_get_irq(dev, 0);
+ if (port.irq < 0) {
+ dev_err(&dev->dev, "cannot get irq\n");
+ return port.irq;
+ }
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&dev->dev, "Register base not found");
+ return -ENODEV;
+ }
+ port.mapbase = res->start;
+ clk = devm_clk_get(&dev->dev, NULL);
+ if (IS_ERR(clk))
+ dev_err(&dev->dev, "missing controller clock");
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(&dev->dev, "failed to enable DMA UART Clk\n");
+ return ret;
+ }
+ port.uartclk = clk_get_rate(clk);
+
+ if (of_property_read_u32(np, "reg-shift", &read) == 0)
+ port.regshift = read;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ port.dev = &dev->dev;
+ if (share_irqs)
+ port.flags |= UPF_SHARE_IRQ;
+ ret = ast_uart_register_port(&port, read);
+ if (ret < 0) {
+ dev_err(&dev->dev,
+ "Fail:register_port at index %d(IO%lx MEM%llx IRQ%d): %d\n",
+ read, port.iobase, (unsigned long long)port.mapbase,
+ port.irq, ret);
+ }
+ return ret;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int serial8250_remove(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct ast_uart_port *up = &ast_uart_ports[i];
+
+ if (up->port.dev == &dev->dev)
+ ast_uart_unregister_port(i);
+ ast_dma_channel_teardown(up);
+ }
+ return 0;
+}
+
+static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
+{
+ int i;
+
+ for (i = 0; i < UART_DMA_NR; i++) {
+ struct ast_uart_port *up = &ast_uart_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ uart_suspend_port(&serial8250_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static int serial8250_resume(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < UART_DMA_NR; i++) {
+ struct ast_uart_port *up = &ast_uart_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ serial8250_resume_port(i);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id ast_serial_dt_ids[] = {
+ { .compatible = "aspeed,ast-sdma-uart", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver serial8250_ast_dma_driver = {
+ .probe = serial8250_probe,
+ .remove = serial8250_remove,
+ .suspend = serial8250_suspend,
+ .resume = serial8250_resume,
+ .driver = {
+ .name = "ast-uart-dma",
+ .of_match_table = of_match_ptr(ast_serial_dt_ids),
+ },
+};
+
+/*
+ * This "device" covers _all_ ISA 8250-compatible serial devices listed
+ * in the table in include/asm/serial.h
+ */
+static struct platform_device *serial8250_isa_devs;
+
+/*
+ * serial8250_register_port and serial8250_unregister_port allows for
+ * 16x50 serial ports to be configured at run-time, to support PCMCIA
+ * modems and PCI multiport cards.
+ */
+
+static struct ast_uart_port *
+ serial8250_find_match_or_unused(struct uart_port *port)
+{
+ int i;
+
+ /*
+ * First, find a port entry which matches.
+ */
+ for (i = 0; i < nr_uarts; i++) {
+ if (uart_match_port(&ast_uart_ports[i].port, port))
+ return &ast_uart_ports[i];
+ }
+ /*
+ * We didn't find a matching entry, so look for the first
+ * free entry. We look for one which hasn't been previously
+ * used (indicated by zero iobase).
+ */
+ for (i = 0; i < nr_uarts; i++)
+ if (ast_uart_ports[i].port.type == PORT_UNKNOWN &&
+ ast_uart_ports[i].port.iobase == 0)
+ return &ast_uart_ports[i];
+ /*
+ * That also failed. Last resort is to find any entry which
+ * doesn't have a real port associated with it.
+ */
+ for (i = 0; i < nr_uarts; i++)
+ if (ast_uart_ports[i].port.type == PORT_UNKNOWN)
+ return &ast_uart_ports[i];
+
+ return NULL;
+}
+
+/**
+ * serial8250_register_port - register a serial port
+ * @port: serial port template
+ *
+ * Configure the serial port specified by the request. If the
+ * port exists and is in use, it is hung up and unregistered
+ * first.
+ *
+ * The port is then probed and if necessary the IRQ is autodetected
+ * If this fails an error is returned.
+ *
+ * On success the port is ready to use and the line number is returned.
+ */
+static int ast_uart_register_port(struct uart_port *port,
+ unsigned int channel_no)
+{
+ struct ast_uart_port *uart;
+ int ret = -ENOSPC;
+
+ if (port->uartclk == 0)
+ return -EINVAL;
+
+ mutex_lock(&ast_uart_mutex);
+
+ uart = serial8250_find_match_or_unused(port);
+ if (uart) {
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+ uart->port.iobase = port->iobase;
+ uart->port.membase = port->membase;
+ uart->port.irq = port->irq;
+ uart->port.uartclk = port->uartclk;
+ uart->port.fifosize = port->fifosize;
+ uart->port.regshift = port->regshift;
+ uart->port.iotype = port->iotype;
+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = port->mapbase;
+ uart->port.private_data = uart;
+ if (port->dev) {
+ UART_DBG("Writing dev\n");
+ uart->port.dev = port->dev;
+ }
+ ret = uart_add_one_port(&serial8250_reg, &uart->port);
+ if (ret != 0) {
+ UART_DBG("uart_add_one_port: Failed for port=%p",
+ &uart->port);
+ return ret;
+ }
+ uart->channel_no = channel_no;
+ spin_lock_init(&uart->lock);
+
+ tasklet_init(&uart->tx_tasklet, ast_uart_tx_sdma_tasklet_func,
+ (unsigned long)uart);
+ tasklet_init(&uart->rx_tasklet, ast_uart_rx_sdma_tasklet_func,
+ (unsigned long)uart);
+ }
+
+ mutex_unlock(&ast_uart_mutex);
+ return ret;
+}
+EXPORT_SYMBOL(ast_uart_register_port);
+
+/**
+ * serial8250_unregister_port - remove a 16x50 serial port at runtime
+ * @line: serial line number
+ *
+ * Remove one serial port. This may not be called from interrupt
+ * context. We hand the port back to the our control.
+ */
+static void ast_uart_unregister_port(int line)
+{
+ struct ast_uart_port *uart = &ast_uart_ports[line];
+
+ mutex_lock(&ast_uart_mutex);
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+ if (serial8250_isa_devs) {
+ uart->port.flags &= ~UPF_BOOT_AUTOCONF;
+ uart->port.type = PORT_UNKNOWN;
+ uart->port.dev = &serial8250_isa_devs->dev;
+ uart_add_one_port(&serial8250_reg, &uart->port);
+ } else {
+ uart->port.dev = NULL;
+ }
+ mutex_unlock(&ast_uart_mutex);
+}
+EXPORT_SYMBOL(ast_uart_unregister_port);
+
+static int __init ast_uart_init(void)
+{
+ int ret;
+
+ if (nr_uarts > UART_DMA_NR)
+ nr_uarts = UART_DMA_NR;
+
+ UART_DBG(KERN_INFO
+ "ast-uart-dma: UART driver with DMA %d ports, IRQ sharing %sabled\n",
+ nr_uarts, share_irqs ? "en" : "dis");
+ spin_lock_init(&ast_uart_irq[0].lock);
+
+ ret = uart_register_driver(&serial8250_reg);
+ if (ret)
+ goto out;
+
+ serial8250_isa_devs = platform_device_alloc("ast-uart-dma",
+ PLAT8250_DEV_LEGACY);
+ if (!serial8250_isa_devs) {
+ ret = -ENOMEM;
+ goto unreg_uart_drv;
+ }
+
+ ret = platform_device_add(serial8250_isa_devs);
+ if (ret)
+ goto put_dev;
+
+ serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
+
+ ret = platform_driver_register(&serial8250_ast_dma_driver);
+ if (ret == 0)
+ goto out;
+
+ platform_device_del(serial8250_isa_devs);
+ put_dev:
+ platform_device_put(serial8250_isa_devs);
+ unreg_uart_drv:
+ uart_unregister_driver(&serial8250_reg);
+ out:
+ return ret;
+}
+
+static void __exit ast_uart_exit(void)
+{
+ struct platform_device *isa_dev = serial8250_isa_devs;
+
+ /*
+ * This tells serial8250_unregister_port() not to re-register
+ * the ports (thereby making serial8250_ast_dma_driver permanently
+ * in use.)
+ */
+ serial8250_isa_devs = NULL;
+
+ platform_driver_unregister(&serial8250_ast_dma_driver);
+ platform_device_unregister(isa_dev);
+
+ uart_unregister_driver(&serial8250_reg);
+}
+
+late_initcall(ast_uart_init);
+module_exit(ast_uart_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AST DMA serial driver");
+MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
--
1.9.1