[RESEND PATCH 14/14] dt-bindings: serial: lantiq: Add optional properties for CCF

From: Songjun Wu
Date: Tue Oct 16 2018 - 05:20:35 EST


Clocks and clock-names are updated in device tree binding.

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
---

Documentation/devicetree/bindings/serial/lantiq_asc.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
index 3acbd309ab9d..40e81a5818f6 100644
--- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -6,8 +6,23 @@ Required properties:
- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
depends on the interrupt-parent interrupt controller.

+Optional properties:
+- clocks: Should contain frequency clock and gate clock
+- clock-names: Should be "freq" and "asc"
+
Example:

+asc0: serial@16600000 {
+ compatible = "lantiq,asc";
+ reg = <0x16600000 0x100000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
+ clock-names = "freq", "asc";
+};
+
asc1: serial@e100c00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
--
2.11.0