Re: [PATCH V5 23/30] dt-bindings: interrupt-controller: C-SKY SMP intc

From: Guo Ren
Date: Thu Sep 27 2018 - 21:07:39 EST


On Thu, Sep 27, 2018 at 11:50:44AM -0500, Rob Herring wrote:
> On Tue, Sep 25, 2018 at 07:39:26AM +0800, Guo Ren wrote:
> > - Dt-bindings doc about C-SKY Multi-processors interrupt controller.
> >
> > Signed-off-by: Guo Ren <ren_guo@xxxxxxxxx>
> > ---
> > .../bindings/interrupt-controller/csky,mpintc.txt | 40 ++++++++++++++++++++++
> > 1 file changed, 40 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > new file mode 100644
> > index 0000000..9cdad74
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > @@ -0,0 +1,40 @@
> > +===========================================
> > +C-SKY Multi-processors Interrupt Controller
> > +===========================================
> > +
> > +C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
> > +SMP soc, and it also could be used in non-SMP system.
> > +
> > +Interrupt number definition:
> > +
> > + 0-15 : software irq, and we use 15 as our IPI_IRQ.
> > + 16-31 : private irq, and we use 16 as the co-processor timer.
> > + 31-1024: common irq for soc ip.
> > +
> > +=============================
> > +intc node bindings definition
> > +=============================
> > +
> > + Description: Describes SMP interrupt controller
> > +
> > + PROPERTIES
> > +
> > + - compatible
> > + Usage: required
> > + Value type: <string>
> > + Definition: must be "csky,mpintc"
>
> Only 1 version?
Currently, one version. Only one csky,mpintc.

>
> This is fine for a fallback, but you should have an SoC specific
> compatible too in case there are any SoC specific errata/quirks.
No SoC specific in fact currently. If necessary we could add it in future.

>
> > + - interrupt-cells
>
> Should be: #interrupt-cells
Yes, I'll fix it.