[PATCH 4.18 27/88] ASoC: tas6424: Save last fault register even when clear

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew F. Davis <afd@xxxxxx>

commit d40e3e9e44db4b3c8777f3b515ba6097ba26e3b2 upstream.

When there is no fault bit set in a fault register we skip the fault
reporting section for that register. This also skips over saving that
registers value. We save the value so we will not double report an
error, but if an error clears then returns we will also not report it
as we did not save the all cleared register value. Fix this by saving
the fault register value in the all clear path.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 sound/soc/codecs/tas6424.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/sound/soc/codecs/tas6424.c
+++ b/sound/soc/codecs/tas6424.c
@@ -424,8 +424,10 @@ static void tas6424_fault_check_work(str
 	       TAS6424_FAULT_PVDD_UV |
 	       TAS6424_FAULT_VBAT_UV;
 
-	if (reg)
+	if (!reg) {
+		tas6424->last_fault1 = reg;
 		goto check_global_fault2_reg;
+	}
 
 	/*
 	 * Only flag errors once for a given occurrence. This is needed as
@@ -461,8 +463,10 @@ check_global_fault2_reg:
 	       TAS6424_FAULT_OTSD_CH3 |
 	       TAS6424_FAULT_OTSD_CH4;
 
-	if (!reg)
+	if (!reg) {
+		tas6424->last_fault2 = reg;
 		goto check_warn_reg;
+	}
 
 	if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD))
 		dev_crit(dev, "experienced a global overtemp shutdown\n");
@@ -497,8 +501,10 @@ check_warn_reg:
 	       TAS6424_WARN_VDD_OTW_CH3 |
 	       TAS6424_WARN_VDD_OTW_CH4;
 
-	if (!reg)
+	if (!reg) {
+		tas6424->last_warn = reg;
 		goto out;
+	}
 
 	if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV))
 		dev_warn(dev, "experienced a VDD under voltage condition\n");