[PATCH v7 5/7] edac: synopsys: Add EDAC ECC support for ZynqMP DDRC

[Manish Narani]

Add EDAC ECC support for ZynqMP DDRC IP. The IP supports interrupts for
corrected and uncorrected errors. Add interrupt handlers for the same.

Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
---
 drivers/edac/Kconfig         |   2 +-
 drivers/edac/synopsys_edac.c | 304 ++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 287 insertions(+), 19 deletions(-)

diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 57304b2..b1fc7a16 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -441,7 +441,7 @@ config EDAC_ALTERA_SDMMC
 
 config EDAC_SYNOPSYS
 	tristate "Synopsys DDR Memory Controller"
-	depends on ARCH_ZYNQ
+	depends on ARCH_ZYNQ || ARM64
 	help
 	  Support for error detection and correction on the Synopsys DDR
 	  memory controller.
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 6bf7959..7ab5b9a 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -22,6 +22,7 @@
 #include <linux/edac.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/interrupt.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 
@@ -272,6 +273,8 @@
  * @bank:	Bank number.
  * @bitpos:	Bit position.
  * @data:	Data causing the error.
+ * @bankgrpnr:	Bank group number.
+ * @blknr:	Block number.
  */
 struct ecc_error_info {
 	u32 row;
@@ -279,6 +282,8 @@ struct ecc_error_info {
 	u32 bank;
 	u32 bitpos;
 	u32 data;
+	u32 bankgrpnr;
+	u32 blknr;
 };
 
 /**
@@ -385,6 +390,68 @@ static int zynq_geterror_info(struct synps_edac_priv *priv)
 }
 
 /**
+ * zynqmp_geterror_info - Get the current ECC error info.
+ * @priv:	DDR memory controller private instance data.
+ *
+ * Return: one if there is no error otherwise returns zero.
+ */
+static int zynqmp_geterror_info(struct synps_edac_priv *priv)
+{
+	struct synps_ecc_status *p;
+	u32 regval, clearval = 0;
+	void __iomem *base;
+
+	base = priv->baseaddr;
+	p = &priv->stat;
+
+	regval = readl(base + ECC_STAT_OFST);
+	if (!regval)
+		return 1;
+
+	p->ce_cnt = (regval & ECC_STAT_CECNT_MASK) >> ECC_STAT_CECNT_SHIFT;
+	p->ue_cnt = (regval & ECC_STAT_UECNT_MASK) >> ECC_STAT_UECNT_SHIFT;
+	p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK);
+
+	regval = readl(base + ECC_CEADDR0_OFST);
+	if (!(p->ce_cnt))
+		goto ue_err;
+
+	p->ceinfo.row = (regval & ECC_CEADDR0_RW_MASK);
+	regval = readl(base + ECC_CEADDR1_OFST);
+	p->ceinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
+					ECC_CEADDR1_BNKNR_SHIFT;
+	p->ceinfo.bankgrpnr = (regval &	ECC_CEADDR1_BNKGRP_MASK) >>
+					ECC_CEADDR1_BNKGRP_SHIFT;
+	p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
+	p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
+	edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n",
+		 readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST),
+		 readl(base + ECC_CSYND2_OFST));
+
+
+ue_err:
+	regval = readl(base + ECC_UEADDR0_OFST);
+	if (!(p->ue_cnt))
+		goto out;
+
+	p->ueinfo.row = (regval & ECC_CEADDR0_RW_MASK);
+	regval = readl(base + ECC_UEADDR1_OFST);
+	p->ueinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
+					ECC_CEADDR1_BNKGRP_SHIFT;
+	p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
+					ECC_CEADDR1_BNKNR_SHIFT;
+	p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
+	p->ueinfo.data = readl(base + ECC_UESYND0_OFST);
+out:
+	clearval = ECC_CTRL_CLR_CE_ERR | ECC_CTRL_CLR_CE_ERRCNT;
+	clearval |= ECC_CTRL_CLR_UE_ERR | ECC_CTRL_CLR_UE_ERRCNT;
+	writel(clearval, base + ECC_CLR_OFST);
+	writel(0x0, base + ECC_CLR_OFST);
+
+	return 0;
+}
+
+/**
  * edac_handle_error - Handle controller error types CE and UE.
  * @mci:	EDAC memory controller instance.
  * @p:		Synopsys ECC status structure.
@@ -399,9 +466,25 @@ static void edac_handle_error(struct mem_ctl_info *mci,
 
 	if (p->ce_cnt) {
 		pinf = &p->ceinfo;
-		snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-			 "DDR ECC error type :%s Row %d Bank %d Col %d ",
-			 "CE", pinf->row, pinf->bank, pinf->col);
+		if (!priv->p_data->quirks) {
+			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+				 "DDR ECC error type:%s Row %d Bank %d Col %d ",
+				  "CE", pinf->row, pinf->bank, pinf->col);
+			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+				 "Bit Position: %d Data: 0x%08x\n",
+				 pinf->bitpos, pinf->data);
+		} else {
+			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+				 "DDR ECC error type:%s Row %d Bank %d Col %d ",
+				  "CE", pinf->row, pinf->bank, pinf->col);
+			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+				 "BankGroup Number %d Block Number %d ",
+				 pinf->bankgrpnr, pinf->blknr);
+			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+				 "Bit Position: %d Data: 0x%08x\n",
+				 pinf->bitpos, pinf->data);
+		}
+
 		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
 				     p->ce_cnt, 0, 0, 0, 0, 0, -1,
 				     priv->message, "");
@@ -409,9 +492,19 @@ static void edac_handle_error(struct mem_ctl_info *mci,
 
 	if (p->ue_cnt) {
 		pinf = &p->ueinfo;
-		snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-			 "DDR ECC error type :%s Row %d Bank %d Col %d ",
-			 "UE", pinf->row, pinf->bank, pinf->col);
+		if (!priv->p_data->quirks) {
+			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+				 "DDR ECC error type :%s Row %d Bank %d Col %d ",
+				"UE", pinf->row, pinf->bank, pinf->col);
+		} else {
+			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+				 "DDR ECC error type :%s Row %d Bank %d Col %d ",
+				 "UE", pinf->row, pinf->bank, pinf->col);
+			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+				 "BankGroup Number %d Block Number %d",
+				 pinf->bankgrpnr, pinf->blknr);
+		}
+
 		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
 				     p->ue_cnt, 0, 0, 0, 0, 0, -1,
 				     priv->message, "");
@@ -421,6 +514,42 @@ static void edac_handle_error(struct mem_ctl_info *mci,
 }
 
 /**
+ * synps_edac_intr_handler - Interrupt Handler for ECC interrupts.
+ * @irq:        IRQ number.
+ * @dev_id:     Device ID.
+ *
+ * Return: IRQ_NONE, if interrupt not set or IRQ_HANDLED otherwise.
+ */
+static irqreturn_t synps_edac_intr_handler(int irq, void *dev_id)
+{
+	const struct synps_platform_data *p_data;
+	struct mem_ctl_info *mci = dev_id;
+	struct synps_edac_priv *priv;
+	int status, regval;
+
+	priv = mci->pvt_info;
+	p_data = priv->p_data;
+
+	regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+	regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
+	if (!(regval & ECC_CE_UE_INTR_MASK))
+		return IRQ_NONE;
+
+	status = p_data->geterror_info(priv);
+	if (status)
+		return IRQ_NONE;
+
+	priv->ce_cnt += priv->stat.ce_cnt;
+	priv->ue_cnt += priv->stat.ue_cnt;
+	edac_handle_error(mci, &priv->stat);
+
+	edac_dbg(3, "Total error count CE %d UE %d\n",
+		 priv->ce_cnt, priv->ue_cnt);
+	writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+	return IRQ_HANDLED;
+}
+
+/**
  * edac_error_check - Check controller for ECC errors.
  * @mci:	EDAC memory controller instance.
  *
@@ -428,10 +557,13 @@ static void edac_handle_error(struct mem_ctl_info *mci,
  */
 static void edac_error_check(struct mem_ctl_info *mci)
 {
-	struct synps_edac_priv *priv = mci->pvt_info;
-	const struct synps_platform_data *p_data = priv->p_data;
+	const struct synps_platform_data *p_data;
+	struct synps_edac_priv *priv;
 	int status;
 
+	priv = mci->pvt_info;
+	p_data = priv->p_data;
+
 	status = p_data->geterror_info(priv);
 	if (status)
 		return;
@@ -476,6 +608,39 @@ static enum dev_type zynq_get_dtype(const void __iomem *base)
 }
 
 /**
+ * zynqmp_get_dtype - Return the controller memory width.
+ * @base:	DDR memory controller base address.
+ *
+ * Get the EDAC device type width appropriate for the current controller
+ * configuration.
+ *
+ * Return: a device type width enumeration.
+ */
+static enum dev_type zynqmp_get_dtype(const void __iomem *base)
+{
+	enum dev_type dt;
+	u32 width;
+
+	width = readl(base + CTRL_OFST);
+	width = (width & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT;
+	switch (width) {
+	case DDRCTL_EWDTH_16:
+		dt = DEV_X2;
+		break;
+	case DDRCTL_EWDTH_32:
+		dt = DEV_X4;
+		break;
+	case DDRCTL_EWDTH_64:
+		dt = DEV_X8;
+		break;
+	default:
+		dt = DEV_UNKNOWN;
+	}
+
+	return dt;
+}
+
+/**
  * zynq_get_eccstate - Return the controller ECC enable/disable status.
  * @base:	DDR memory controller base address.
  *
@@ -485,19 +650,43 @@ static enum dev_type zynq_get_dtype(const void __iomem *base)
  */
 static bool zynq_get_eccstate(void __iomem *base)
 {
-	bool state = false;
 	enum dev_type dt;
 	u32 ecctype;
 
 	dt = zynq_get_dtype(base);
 	if (dt == DEV_UNKNOWN)
-		return state;
+		return false;
 
 	ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK;
 	if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2))
-		state = true;
+		return true;
 
-	return state;
+	return false;
+}
+
+/**
+ * zynqmp_get_eccstate - Return the controller ECC enable/disable status.
+ * @base:	DDR memory controller base address.
+ *
+ * Get the ECC enable/disable status for the controller.
+ *
+ * Return: a ECC status boolean i.e true/false - enabled/disabled.
+ */
+static bool zynqmp_get_eccstate(void __iomem *base)
+{
+	enum dev_type dt;
+	u32 ecctype;
+
+	dt = zynqmp_get_dtype(base);
+	if (dt == DEV_UNKNOWN)
+		return false;
+
+	ecctype = readl(base + ECC_CFG0_OFST) & SCRUB_MODE_MASK;
+	if ((ecctype == SCRUB_MODE_SECDED) &&
+	    ((dt == DEV_X2) || (dt == DEV_X4) || (dt == DEV_X8)))
+		return true;
+
+	return false;
 }
 
 /**
@@ -539,6 +728,34 @@ static enum mem_type zynq_get_mtype(const void __iomem *base)
 }
 
 /**
+ * zynqmp_get_mtype - Returns controller memory type.
+ * @base:	Synopsys ECC status structure.
+ *
+ * Get the EDAC memory type appropriate for the current controller
+ * configuration.
+ *
+ * Return: a memory type enumeration.
+ */
+static enum mem_type zynqmp_get_mtype(const void __iomem *base)
+{
+	enum mem_type mt;
+	u32 memtype;
+
+	memtype = readl(base + CTRL_OFST);
+
+	if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3))
+		mt = MEM_DDR3;
+	else if (memtype & MEM_TYPE_DDR2)
+		mt = MEM_RDDR2;
+	else if ((memtype & MEM_TYPE_LPDDR4) || (memtype & MEM_TYPE_DDR4))
+		mt = MEM_DDR4;
+	else
+		mt = MEM_EMPTY;
+
+	return mt;
+}
+
+/**
  * edac_init_csrows - Initialize the cs row data.
  * @mci:	EDAC memory controller instance.
  *
@@ -600,8 +817,13 @@ static void edac_mc_init(struct mem_ctl_info *mci,
 	mci->dev_name = SYNPS_EDAC_MOD_STRING;
 	mci->mod_name = SYNPS_EDAC_MOD_VER;
 
-	edac_op_state = EDAC_OPSTATE_POLL;
-	mci->edac_check = edac_error_check;
+	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
+		edac_op_state = EDAC_OPSTATE_INT;
+	} else {
+		edac_op_state = EDAC_OPSTATE_POLL;
+		mci->edac_check = edac_error_check;
+	}
+
 	mci->ctl_page_to_phys = NULL;
 
 	edac_init_csrows(mci);
@@ -615,9 +837,26 @@ static const struct synps_platform_data zynq_edac_def = {
 	.quirks		= 0,
 };
 
+static const struct synps_platform_data zynqmp_edac_def = {
+	.geterror_info	= zynqmp_geterror_info,
+	.get_mtype	= zynqmp_get_mtype,
+	.get_dtype	= zynqmp_get_dtype,
+	.get_eccstate	= zynqmp_get_eccstate,
+	.quirks		= DDR_ECC_INTR_SUPPORT,
+};
+
 static const struct of_device_id synps_edac_match[] = {
-	{ .compatible = "xlnx,zynq-ddrc-a05", .data = (void *)&zynq_edac_def },
-	{ /* end of table */ }
+	{
+		.compatible = "xlnx,zynq-ddrc-a05",
+		.data = (void *)&zynq_edac_def
+	},
+	{
+		.compatible = "xlnx,zynqmp-ddrc-2.40a",
+		.data = (void *)&zynqmp_edac_def
+	},
+	{
+		/* end of table */
+	}
 };
 
 MODULE_DEVICE_TABLE(of, synps_edac_match);
@@ -639,7 +878,7 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
 	struct mem_ctl_info *mci;
 	void __iomem *baseaddr;
 	struct resource *res;
-	int rc;
+	int rc, irq;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	baseaddr = devm_ioremap_resource(&pdev->dev, res);
@@ -673,6 +912,28 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
 
 	edac_mc_init(mci, pdev);
 
+	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0) {
+			edac_printk(KERN_ERR, EDAC_MC,
+					"No irq %d in DT\n", irq);
+			rc = irq;
+			goto free_edac_mc;
+		}
+
+		rc = devm_request_irq(&pdev->dev, irq,
+			synps_edac_intr_handler,
+			0, dev_name(&pdev->dev), mci);
+		if (rc < 0) {
+			edac_printk(KERN_ERR, EDAC_MC, "Failed to request Irq\n");
+			goto free_edac_mc;
+		}
+
+		/* Enable UE/CE Interrupts */
+		writel((DDR_QOSUE_MASK | DDR_QOSCE_MASK),
+			priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+	}
+
 	rc = edac_mc_add_mc(mci);
 	if (rc) {
 		edac_printk(KERN_ERR, EDAC_MC,
@@ -684,7 +945,8 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
 	 * Start capturing the correctable and uncorrectable errors. A write of
 	 * 0 starts the counters.
 	 */
-	writel(0x0, baseaddr + ECC_CTRL_OFST);
+	if (!(priv->p_data->quirks & DDR_ECC_INTR_SUPPORT))
+		writel(0x0, baseaddr + ECC_CTRL_OFST);
 	return rc;
 
 free_edac_mc:
@@ -702,7 +964,13 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
 static int synps_edac_mc_remove(struct platform_device *pdev)
 {
 	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+	struct synps_edac_priv *priv;
 
+	priv = mci->pvt_info;
+	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
+		/* Disable UE/CE Interrupts */
+		writel((DDR_QOSUE_MASK | DDR_QOSCE_MASK),
+			priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
 	edac_mc_del_mc(&pdev->dev);
 	edac_mc_free(mci);
 
-- 
2.1.1