Re: [PATCH net-next 11/11] vhost_net: batch submitting XDP buffers to underlayer sockets

From: Jason Wang
Date: Fri Sep 07 2018 - 03:42:05 EST




On 2018å09æ07æ 00:46, Michael S. Tsirkin wrote:
On Thu, Sep 06, 2018 at 12:05:26PM +0800, Jason Wang wrote:
This patch implements XDP batching for vhost_net. The idea is first to
try to do userspace copy and build XDP buff directly in vhost. Instead
of submitting the packet immediately, vhost_net will batch them in an
array and submit every 64 (VHOST_NET_BATCH) packets to the under layer
sockets through msg_control of sendmsg().

When XDP is enabled on the TUN/TAP, TUN/TAP can process XDP inside a
loop without caring GUP thus it can do batch map flushing. When XDP is
not enabled or not supported, the underlayer socket need to build skb
and pass it to network core. The batched packet submission allows us
to do batching like netif_receive_skb_list() in the future.

This saves lots of indirect calls for better cache utilization. For
the case that we can't so batching e.g when sndbuf is limited or
packet size is too large, we will go for usual one packet per
sendmsg() way.

Doing testpmd on various setups gives us:

Test /+pps%
XDP_DROP on TAP /+44.8%
XDP_REDIRECT on TAP /+29%
macvtap (skb) /+26%

Netperf tests shows obvious improvements for small packet transmission:

size/session/+thu%/+normalize%
64/ 1/ +2%/ 0%
64/ 2/ +3%/ +1%
64/ 4/ +7%/ +5%
64/ 8/ +8%/ +6%
256/ 1/ +3%/ 0%
256/ 2/ +10%/ +7%
256/ 4/ +26%/ +22%
256/ 8/ +27%/ +23%
512/ 1/ +3%/ +2%
512/ 2/ +19%/ +14%
512/ 4/ +43%/ +40%
512/ 8/ +45%/ +41%
1024/ 1/ +4%/ 0%
1024/ 2/ +27%/ +21%
1024/ 4/ +38%/ +73%
1024/ 8/ +15%/ +24%
2048/ 1/ +10%/ +7%
2048/ 2/ +16%/ +12%
2048/ 4/ 0%/ +2%
2048/ 8/ 0%/ +2%
4096/ 1/ +36%/ +60%
4096/ 2/ -11%/ -26%
4096/ 4/ 0%/ +14%
4096/ 8/ 0%/ +4%
16384/ 1/ -1%/ +5%
16384/ 2/ 0%/ +2%
16384/ 4/ 0%/ -3%
16384/ 8/ 0%/ +4%
65535/ 1/ 0%/ +10%
65535/ 2/ 0%/ +8%
65535/ 4/ 0%/ +1%
65535/ 8/ 0%/ +3%

Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
---
drivers/vhost/net.c | 164 ++++++++++++++++++++++++++++++++++++++++----
1 file changed, 151 insertions(+), 13 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index fb01ce6d981c..1dd4239cbff8 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -116,6 +116,7 @@ struct vhost_net_virtqueue {
* For RX, number of batched heads
*/
int done_idx;
+ int batched_xdp;
Pls add a comment documenting what does this new field do.

Ok.


/* an array of userspace buffers info */
struct ubuf_info *ubuf_info;
/* Reference counting for outstanding ubufs.
@@ -123,6 +124,7 @@ struct vhost_net_virtqueue {
struct vhost_net_ubuf_ref *ubufs;
struct ptr_ring *rx_ring;
struct vhost_net_buf rxq;
+ struct xdp_buff xdp[VHOST_NET_BATCH];
This is a bit too much to have inline. 64 entries 48 bytes each, and we
have 2 of these structures, that's already >4K.

Let me allocate it elsewhere.


};
struct vhost_net {
@@ -338,6 +340,11 @@ static bool vhost_sock_zcopy(struct socket *sock)
sock_flag(sock->sk, SOCK_ZEROCOPY);
}
+static bool vhost_sock_xdp(struct socket *sock)
+{
+ return sock_flag(sock->sk, SOCK_XDP);
what if an xdp program is attached while this processing
is going on? Flag value will be wrong - is this safe
and why? Pls add a comment.

Ok, let me add comment to explain. It's safe and may just lead few packets to be dropped if XDP program want to extend packet's header.


+}
+
/* In case of DMA done not in order in lower device driver for some reason.
* upend_idx is used to track end of used idx, done_idx is used to track head
* of used idx. Once lower device DMA done contiguously, we will signal KVM
@@ -444,10 +451,36 @@ static void vhost_net_signal_used(struct vhost_net_virtqueue *nvq)
nvq->done_idx = 0;
}
+static void vhost_tx_batch(struct vhost_net *net,
+ struct vhost_net_virtqueue *nvq,
+ struct socket *sock,
+ struct msghdr *msghdr)
+{
+ struct tun_msg_ctl ctl = {
+ .type = nvq->batched_xdp << 16 | TUN_MSG_PTR,
+ .ptr = nvq->xdp,
+ };
+ int err;
+
+ if (nvq->batched_xdp == 0)
+ goto signal_used;
+
+ msghdr->msg_control = &ctl;
+ err = sock->ops->sendmsg(sock, msghdr, 0);
+ if (unlikely(err < 0)) {
+ vq_err(&nvq->vq, "Fail to batch sending packets\n");
+ return;
+ }
+
+signal_used:
+ vhost_net_signal_used(nvq);
+ nvq->batched_xdp = 0;
+}
+
static int vhost_net_tx_get_vq_desc(struct vhost_net *net,
struct vhost_net_virtqueue *nvq,
unsigned int *out_num, unsigned int *in_num,
- bool *busyloop_intr)
+ struct msghdr *msghdr, bool *busyloop_intr)
{
struct vhost_virtqueue *vq = &nvq->vq;
unsigned long uninitialized_var(endtime);
@@ -455,8 +488,9 @@ static int vhost_net_tx_get_vq_desc(struct vhost_net *net,
out_num, in_num, NULL, NULL);
if (r == vq->num && vq->busyloop_timeout) {
+ /* Flush batched packets first */
if (!vhost_sock_zcopy(vq->private_data))
- vhost_net_signal_used(nvq);
+ vhost_tx_batch(net, nvq, vq->private_data, msghdr);
preempt_disable();
endtime = busy_clock() + vq->busyloop_timeout;
while (vhost_can_busy_poll(endtime)) {
@@ -512,7 +546,7 @@ static int get_tx_bufs(struct vhost_net *net,
struct vhost_virtqueue *vq = &nvq->vq;
int ret;
- ret = vhost_net_tx_get_vq_desc(net, nvq, out, in, busyloop_intr);
+ ret = vhost_net_tx_get_vq_desc(net, nvq, out, in, msg, busyloop_intr);
if (ret < 0 || ret == vq->num)
return ret;
@@ -540,6 +574,83 @@ static bool tx_can_batch(struct vhost_virtqueue *vq, size_t total_len)
!vhost_vq_avail_empty(vq->dev, vq);
}
+#define VHOST_NET_RX_PAD (NET_IP_ALIGN + NET_SKB_PAD)
I wonder whether NET_IP_ALIGN make sense for XDP.

XDP is not the only consumer, socket may build skb based on this.


+
+static int vhost_net_build_xdp(struct vhost_net_virtqueue *nvq,
+ struct iov_iter *from)
+{
+ struct vhost_virtqueue *vq = &nvq->vq;
+ struct socket *sock = vq->private_data;
+ struct page_frag *alloc_frag = &current->task_frag;
+ struct virtio_net_hdr *gso;
+ struct xdp_buff *xdp = &nvq->xdp[nvq->batched_xdp];
+ size_t len = iov_iter_count(from);
+ int headroom = vhost_sock_xdp(sock) ? XDP_PACKET_HEADROOM : 0;
+ int buflen = SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+ int pad = SKB_DATA_ALIGN(VHOST_NET_RX_PAD + headroom + nvq->sock_hlen);
+ int sock_hlen = nvq->sock_hlen;
+ void *buf;
+ int copied;
+
+ if (unlikely(len < nvq->sock_hlen))
+ return -EFAULT;
+
+ if (SKB_DATA_ALIGN(len + pad) +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) > PAGE_SIZE)
+ return -ENOSPC;
+
+ buflen += SKB_DATA_ALIGN(len + pad);
+ alloc_frag->offset = ALIGN((u64)alloc_frag->offset, SMP_CACHE_BYTES);
+ if (unlikely(!skb_page_frag_refill(buflen, alloc_frag, GFP_KERNEL)))
+ return -ENOMEM;
+
+ buf = (char *)page_address(alloc_frag->page) + alloc_frag->offset;
+
+ /* We store two kinds of metadata in the header which will be
+ * used for XDP_PASS to do build_skb():
+ * offset 0: buflen
+ * offset sizeof(int): vnet header
Define a struct for the metadata then?

Ok.



+ */
+ copied = copy_page_from_iter(alloc_frag->page,
+ alloc_frag->offset + sizeof(int),
+ sock_hlen, from);
+ if (copied != sock_hlen)
+ return -EFAULT;
+
+ gso = (struct virtio_net_hdr *)(buf + sizeof(int));
+
+ if ((gso->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) &&
+ vhost16_to_cpu(vq, gso->csum_start) +
+ vhost16_to_cpu(vq, gso->csum_offset) + 2 >
+ vhost16_to_cpu(vq, gso->hdr_len)) {
+ gso->hdr_len = cpu_to_vhost16(vq,
+ vhost16_to_cpu(vq, gso->csum_start) +
+ vhost16_to_cpu(vq, gso->csum_offset) + 2);
+
+ if (vhost16_to_cpu(vq, gso->hdr_len) > len)
+ return -EINVAL;
+ }
+
+ len -= sock_hlen;
+ copied = copy_page_from_iter(alloc_frag->page,
+ alloc_frag->offset + pad,
+ len, from);
+ if (copied != len)
+ return -EFAULT;
+
+ xdp->data_hard_start = buf;
+ xdp->data = buf + pad;
+ xdp->data_end = xdp->data + len;
+ *(int *)(xdp->data_hard_start) = buflen;
+
+ get_page(alloc_frag->page);
+ alloc_frag->offset += buflen;
+
+ ++nvq->batched_xdp;
+
+ return 0;
+}
+
static void handle_tx_copy(struct vhost_net *net, struct socket *sock)
{
struct vhost_net_virtqueue *nvq = &net->vqs[VHOST_NET_VQ_TX];
@@ -556,10 +667,14 @@ static void handle_tx_copy(struct vhost_net *net, struct socket *sock)
size_t len, total_len = 0;
int err;
int sent_pkts = 0;
+ bool bulking = (sock->sk->sk_sndbuf == INT_MAX);
What does bulking mean?

The name is misleading, it means whether we can do batching. For simplicity, I disable batching is sndbuf is not INT_MAX.

for (;;) {
bool busyloop_intr = false;
+ if (nvq->done_idx == VHOST_NET_BATCH)
+ vhost_tx_batch(net, nvq, sock, &msg);
+
head = get_tx_bufs(net, nvq, &msg, &out, &in, &len,
&busyloop_intr);
/* On error, stop handling until the next kick. */
@@ -577,14 +692,34 @@ static void handle_tx_copy(struct vhost_net *net, struct socket *sock)
break;
}
- vq->heads[nvq->done_idx].id = cpu_to_vhost32(vq, head);
- vq->heads[nvq->done_idx].len = 0;
-
total_len += len;
- if (tx_can_batch(vq, total_len))
- msg.msg_flags |= MSG_MORE;
- else
- msg.msg_flags &= ~MSG_MORE;
+
+ /* For simplicity, TX batching is only enabled if
+ * sndbuf is unlimited.
What if sndbuf changes while this processing is going on?

We will get the correct sndbuf in the next run of handle_tx(). I think this is safe.

Thanks


+ */
+ if (bulking) {
+ err = vhost_net_build_xdp(nvq, &msg.msg_iter);
+ if (!err) {
+ goto done;
+ } else if (unlikely(err != -ENOSPC)) {
+ vhost_tx_batch(net, nvq, sock, &msg);
+ vhost_discard_vq_desc(vq, 1);
+ vhost_net_enable_vq(net, vq);
+ break;
+ }
+
+ /* We can't build XDP buff, go for single
+ * packet path but let's flush batched
+ * packets.
+ */
+ vhost_tx_batch(net, nvq, sock, &msg);
+ msg.msg_control = NULL;
+ } else {
+ if (tx_can_batch(vq, total_len))
+ msg.msg_flags |= MSG_MORE;
+ else
+ msg.msg_flags &= ~MSG_MORE;
+ }
/* TODO: Check specific error and bomb out unless ENOBUFS? */
err = sock->ops->sendmsg(sock, &msg, len);
@@ -596,15 +731,17 @@ static void handle_tx_copy(struct vhost_net *net, struct socket *sock)
if (err != len)
pr_debug("Truncated TX packet: len %d != %zd\n",
err, len);
- if (++nvq->done_idx >= VHOST_NET_BATCH)
- vhost_net_signal_used(nvq);
+done:
+ vq->heads[nvq->done_idx].id = cpu_to_vhost32(vq, head);
+ vq->heads[nvq->done_idx].len = 0;
+ ++nvq->done_idx;
if (vhost_exceeds_weight(++sent_pkts, total_len)) {
vhost_poll_queue(&vq->poll);
break;
}
}
- vhost_net_signal_used(nvq);
+ vhost_tx_batch(net, nvq, sock, &msg);
}
static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock)
@@ -1111,6 +1248,7 @@ static int vhost_net_open(struct inode *inode, struct file *f)
n->vqs[i].ubuf_info = NULL;
n->vqs[i].upend_idx = 0;
n->vqs[i].done_idx = 0;
+ n->vqs[i].batched_xdp = 0;
n->vqs[i].vhost_hlen = 0;
n->vqs[i].sock_hlen = 0;
n->vqs[i].rx_ring = NULL;
--
2.17.1