[PATCH 1/3] iio: adxl372: Refactor the driver

From: Stefan Popa
Date: Tue Sep 04 2018 - 10:27:00 EST


This patch restructures the existing adxl372 driver by adding a module for
SPI and a header file, while the baseline module deals with the chip-logic.

This is a necessary step, as this driver should support in the future
a similar device which differs only in the type of interface used (I2C
instead of SPI).

Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx>
---
MAINTAINERS | 1 +
drivers/iio/accel/Kconfig | 11 +++++--
drivers/iio/accel/Makefile | 1 +
drivers/iio/accel/adxl372.c | 73 ++++++++++++++---------------------------
drivers/iio/accel/adxl372.h | 15 +++++++++
drivers/iio/accel/adxl372_spi.c | 52 +++++++++++++++++++++++++++++
6 files changed, 102 insertions(+), 51 deletions(-)
create mode 100644 drivers/iio/accel/adxl372.h
create mode 100644 drivers/iio/accel/adxl372_spi.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 2bfc9b0..2938632 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -548,6 +548,7 @@ M: Stefan Popa <stefan.popa@xxxxxxxxxx>
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/iio/accel/adxl372.c
+F: drivers/iio/accel/adxl372_spi.c
F: Documentation/devicetree/bindings/iio/accel/adxl372.txt

AF9013 MEDIA DRIVER
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index eae23d6..bed5da8 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -61,15 +61,20 @@ config ADXL345_SPI
for the core module.

config ADXL372
- tristate "Analog Devices ADXL372 3-Axis Accelerometer Driver"
- depends on SPI
+ tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
+
+config ADXL372_SPI
+ tristate "Analog Devices ADXL372 3-Axis Accelerometer SPI Driver"
+ depends on SPI
+ select ADXL372
+ select REGMAP_SPI
help
Say yes here to add support for the Analog Devices ADXL372 triaxial
acceleration sensor.
To compile this driver as a module, choose M here: the
- module will be called adxl372.
+ module will be called adxl372_spi.

config BMA180
tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5758ffc..c9c5db9 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ADXL345) += adxl345_core.o
obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
obj-$(CONFIG_ADXL372) += adxl372.o
+obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
obj-$(CONFIG_BMA180) += bma180.o
obj-$(CONFIG_BMA220) += bma220_spi.o
obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index fdaaa58..f1df89d 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * ADXL372 3-Axis Digital Accelerometer SPI driver
+ * ADXL372 3-Axis Digital Accelerometer core driver
*
* Copyright 2018 Analog Devices Inc.
*/
@@ -20,6 +20,8 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>

+#include "adxl372.h"
+
/* ADXL372 registers definition */
#define ADXL372_DEVID 0x00
#define ADXL372_DEVID_MST 0x01
@@ -246,7 +248,8 @@ static const struct iio_chan_spec adxl372_channels[] = {
};

struct adxl372_state {
- struct spi_device *spi;
+ int irq;
+ struct device *dev;
struct regmap *regmap;
struct iio_trigger *dready_trig;
enum adxl372_fifo_mode fifo_mode;
@@ -565,7 +568,7 @@ static int adxl372_setup(struct adxl372_state *st)
return ret;

if (regval != ADXL372_DEVID_VAL) {
- dev_err(&st->spi->dev, "Invalid chip id %x\n", regval);
+ dev_err(st->dev, "Invalid chip id %x\n", regval);
return -ENODEV;
}

@@ -891,56 +894,45 @@ static const struct iio_info adxl372_info = {
.hwfifo_set_watermark = adxl372_set_watermark,
};

-static bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg)
+bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg)
{
return (reg == ADXL372_FIFO_DATA);
}
+EXPORT_SYMBOL_GPL(adxl372_readable_noinc_reg);

-static const struct regmap_config adxl372_spi_regmap_config = {
- .reg_bits = 7,
- .pad_bits = 1,
- .val_bits = 8,
- .read_flag_mask = BIT(0),
- .readable_noinc_reg = adxl372_readable_noinc_reg,
-};
-
-static int adxl372_probe(struct spi_device *spi)
+int adxl372_probe(struct device *dev, struct regmap *regmap,
+ int irq, const char *name)
{
struct iio_dev *indio_dev;
struct adxl372_state *st;
- struct regmap *regmap;
int ret;

- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;

st = iio_priv(indio_dev);
- spi_set_drvdata(spi, indio_dev);
-
- st->spi = spi;
-
- regmap = devm_regmap_init_spi(spi, &adxl372_spi_regmap_config);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
+ dev_set_drvdata(dev, indio_dev);

+ st->dev = dev;
st->regmap = regmap;
+ st->irq = irq;

indio_dev->channels = adxl372_channels;
indio_dev->num_channels = ARRAY_SIZE(adxl372_channels);
indio_dev->available_scan_masks = adxl372_channel_masks;
- indio_dev->dev.parent = &spi->dev;
- indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->dev.parent = dev;
+ indio_dev->name = name;
indio_dev->info = &adxl372_info;
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;

ret = adxl372_setup(st);
if (ret < 0) {
- dev_err(&st->spi->dev, "ADXL372 setup failed\n");
+ dev_err(dev, "ADXL372 setup failed\n");
return ret;
}

- ret = devm_iio_triggered_buffer_setup(&st->spi->dev,
+ ret = devm_iio_triggered_buffer_setup(dev,
indio_dev, NULL,
adxl372_trigger_handler,
&adxl372_buffer_ops);
@@ -949,8 +941,8 @@ static int adxl372_probe(struct spi_device *spi)

iio_buffer_set_attrs(indio_dev->buffer, adxl372_fifo_attributes);

- if (st->spi->irq) {
- st->dready_trig = devm_iio_trigger_alloc(&st->spi->dev,
+ if (st->irq) {
+ st->dready_trig = devm_iio_trigger_alloc(dev,
"%s-dev%d",
indio_dev->name,
indio_dev->id);
@@ -958,15 +950,15 @@ static int adxl372_probe(struct spi_device *spi)
return -ENOMEM;

st->dready_trig->ops = &adxl372_trigger_ops;
- st->dready_trig->dev.parent = &st->spi->dev;
+ st->dready_trig->dev.parent = dev;
iio_trigger_set_drvdata(st->dready_trig, indio_dev);
- ret = devm_iio_trigger_register(&st->spi->dev, st->dready_trig);
+ ret = devm_iio_trigger_register(dev, st->dready_trig);
if (ret < 0)
return ret;

indio_dev->trig = iio_trigger_get(st->dready_trig);

- ret = devm_request_threaded_irq(&st->spi->dev, st->spi->irq,
+ ret = devm_request_threaded_irq(dev, st->irq,
iio_trigger_generic_data_rdy_poll,
NULL,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
@@ -975,24 +967,9 @@ static int adxl372_probe(struct spi_device *spi)
return ret;
}

- return devm_iio_device_register(&st->spi->dev, indio_dev);
+ return devm_iio_device_register(dev, indio_dev);
}
-
-static const struct spi_device_id adxl372_id[] = {
- { "adxl372", 0 },
- {}
-};
-MODULE_DEVICE_TABLE(spi, adxl372_id);
-
-static struct spi_driver adxl372_driver = {
- .driver = {
- .name = KBUILD_MODNAME,
- },
- .probe = adxl372_probe,
- .id_table = adxl372_id,
-};
-
-module_spi_driver(adxl372_driver);
+EXPORT_SYMBOL_GPL(adxl372_probe);

MODULE_AUTHOR("Stefan Popa <stefan.popa@xxxxxxxxxx>");
MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer driver");
diff --git a/drivers/iio/accel/adxl372.h b/drivers/iio/accel/adxl372.h
new file mode 100644
index 0000000..5da89b1
--- /dev/null
+++ b/drivers/iio/accel/adxl372.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ADXL372 3-Axis Digital Accelerometer
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+
+#ifndef _ADXL372_H_
+#define _ADXL372_H_
+
+int adxl372_probe(struct device *dev, struct regmap *regmap,
+ int irq, const char *name);
+bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg);
+
+#endif /* _ADXL372_H_ */
diff --git a/drivers/iio/accel/adxl372_spi.c b/drivers/iio/accel/adxl372_spi.c
new file mode 100644
index 0000000..e14e655
--- /dev/null
+++ b/drivers/iio/accel/adxl372_spi.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADXL372 3-Axis Digital Accelerometer SPI driver
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "adxl372.h"
+
+static const struct regmap_config adxl372_spi_regmap_config = {
+ .reg_bits = 7,
+ .pad_bits = 1,
+ .val_bits = 8,
+ .read_flag_mask = BIT(0),
+ .readable_noinc_reg = adxl372_readable_noinc_reg,
+};
+
+static int adxl372_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_spi(spi, &adxl372_spi_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return adxl372_probe(&spi->dev, regmap, spi->irq, id->name);
+}
+
+static const struct spi_device_id adxl372_spi_id[] = {
+ { "adxl372", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, adxl372_spi_id);
+
+static struct spi_driver adxl372_spi_driver = {
+ .driver = {
+ .name = "adxl372_spi",
+ },
+ .probe = adxl372_spi_probe,
+ .id_table = adxl372_spi_id,
+};
+
+module_spi_driver(adxl372_spi_driver);
+
+MODULE_AUTHOR("Stefan Popa <stefan.popa@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer SPI driver");
+MODULE_LICENSE("GPL");
--
2.7.4