[PATCH v2 1/2] ARM: dts: imx6: RDU2: Use new CODEC reset pin name

From: Andrew F. Davis
Date: Tue Sep 04 2018 - 10:20:40 EST


The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name use this here.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---

Changes from v1:
- Remove "fix" from commit message

arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7fff3717cf7c..a0f5cfda0055 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -384,7 +384,7 @@
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};

accel@1c {
@@ -572,7 +572,7 @@
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};

touchscreen@20 {
--
2.18.0