[PATCH v2 1/2] Bluetooth: mediatek: Add protocol support for MediaTek MT7668U USB devices

From: sean.wang
Date: Mon Aug 20 2018 - 05:13:10 EST


From: Sean Wang <sean.wang@xxxxxxxxxxxx>

This adds the support of enabling MT7668U Bluetooth function running
on the top of btusb driver.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=0e8d ProdID=7668 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms

Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
drivers/bluetooth/Kconfig | 11 +
drivers/bluetooth/btusb.c | 549 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 560 insertions(+)

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 07e55cd..c25bb11 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -52,6 +52,17 @@ config BT_HCIBTUSB_BCM

Say Y here to compile support for Broadcom protocol.

+config BT_HCIBTUSB_MTK
+ bool "MediaTek protocol support"
+ depends on BT_HCIBTUSB
+ default n
+ help
+ The MediaTek protocol support enables firmware download
+ support and chip initialization for MediaTek Bluetooth
+ USB controllers.
+
+ Say Y here to compile support for MediaTek protocol.
+
config BT_HCIBTUSB_RTL
bool "Realtek protocol support"
depends on BT_HCIBTUSB
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 60bf04b..4ebfb77 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -26,6 +26,7 @@
#include <linux/usb.h>
#include <linux/usb/quirks.h>
#include <linux/firmware.h>
+#include <linux/iopoll.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/suspend.h>
@@ -69,6 +70,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_BCM2045 0x40000
#define BTUSB_IFNUM_2 0x80000
#define BTUSB_CW6622 0x100000
+#define BTUSB_MEDIATEK 0x200000

static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -355,6 +357,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_REALTEK },

+ /* MediaTek Bluetooth devices */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
+ .driver_info = BTUSB_MEDIATEK },
+
/* Additional Realtek 8723AE Bluetooth devices */
{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
@@ -437,6 +443,7 @@ struct btusb_data {
struct sk_buff *evt_skb;
struct sk_buff *acl_skb;
struct sk_buff *sco_skb;
+ struct sk_buff *rx_skb;

struct usb_endpoint_descriptor *intr_ep;
struct usb_endpoint_descriptor *bulk_tx_ep;
@@ -459,6 +466,8 @@ struct btusb_data {
int (*setup_on_usb)(struct hci_dev *hdev);

int oob_wake_irq; /* irq for out-of-band wake-on-bt */
+
+ unsigned long tx_state;
};

static inline void btusb_free_frags(struct btusb_data *data)
@@ -2347,6 +2356,535 @@ static int btusb_shutdown_intel(struct hci_dev *hdev)
return 0;
}

+#ifdef CONFIG_BT_HCIBTUSB_MTK
+
+#define FIRMWARE_MT7668 "mt7668pr2h.bin"
+
+#define BTMTKUSB_TX_WAIT_VND_EVT 1
+
+enum {
+ BTMTK_WMT_PATCH_DWNLD = 0x1,
+ BTMTK_WMT_FUNC_CTRL = 0x6,
+ BTMTK_WMT_RST = 0x7,
+ BTMTK_WMT_SEMAPHORE = 0x17,
+};
+
+enum {
+ BTMTK_WMT_INVALID,
+ BTMTK_WMT_PATCH_UNDONE,
+ BTMTK_WMT_PATCH_DONE,
+ BTMTK_WMT_ON_UNDONE,
+ BTMTK_WMT_ON_DONE,
+ BTMTK_WMT_ON_PROGRESS,
+};
+
+struct btmtk_wmt_hdr {
+ u8 dir;
+ u8 op;
+ __le16 dlen;
+ u8 flag;
+} __packed;
+
+struct btmtk_hci_wmt_cmd {
+ struct btmtk_wmt_hdr hdr;
+ u8 data[256];
+} __packed;
+
+struct btmtk_hci_wmt_evt {
+ struct hci_event_hdr hhdr;
+ struct btmtk_wmt_hdr whdr;
+} __packed;
+
+struct btmtk_hci_wmt_evt_funcc {
+ struct btmtk_hci_wmt_evt hwhdr;
+ __be16 status;
+} __packed;
+
+struct btmtk_hci_wmt_params {
+ u8 op;
+ u8 flag;
+ u16 dlen;
+ const void *data;
+ u32 *status;
+};
+
+static void btusb_mtk_wmt_recv_complete(struct urb *urb)
+{
+ struct hci_dev *hdev = urb->context;
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ int err;
+
+ if (!test_bit(HCI_RUNNING, &hdev->flags))
+ return;
+
+ if (urb->status == 0 && urb->actual_length > 0) {
+ hdev->stat.byte_rx += urb->actual_length;
+
+ /* The WMT event is actually a HCI event so that the WMT event
+ * should go to the code flow a HCI event should go to.
+ */
+ if (btusb_recv_intr(data, urb->transfer_buffer,
+ urb->actual_length) < 0) {
+ bt_dev_err(hdev, "corrupted event packet");
+ hdev->stat.err_rx++;
+ }
+
+ /* Event is already read so that urb is not needed being
+ * submitted again.
+ */
+ return;
+ } else if (urb->status == -ENOENT) {
+ /* Avoid suspend failed when usb_kill_urb */
+ return;
+ }
+
+ if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
+ return;
+
+ usb_mark_last_busy(data->udev);
+
+ /* It's necessary to wait some time to relax the target device and then
+ * submit URB again. Otherwise, the WMT event cannot return from the
+ * device successfully.
+ */
+ udelay(100);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0) {
+ /* -EPERM: urb is being killed;
+ * -ENODEV: device got disconnected
+ */
+ if (err != -EPERM && err != -ENODEV)
+ bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
+ urb, -err);
+ }
+}
+
+static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ struct usb_ctrlrequest *dr;
+ unsigned char *buf;
+ int err, size = 64;
+ unsigned int pipe;
+ struct urb *urb;
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
+ return -ENOMEM;
+
+ dr = kmalloc(sizeof(*dr), GFP_KERNEL);
+ if (!dr) {
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+
+ dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN;
+ dr->bRequest = 1;
+ dr->wIndex = cpu_to_le16(0);
+ dr->wValue = cpu_to_le16(48);
+ dr->wLength = cpu_to_le16(size);
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf) {
+ kfree(dr);
+ return -ENOMEM;
+ }
+
+ pipe = usb_rcvctrlpipe(data->udev, 0);
+
+ usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
+ buf, size, btusb_mtk_wmt_recv_complete, hdev);
+
+ urb->transfer_flags |= URB_FREE_BUFFER;
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err < 0) {
+ if (err != -EPERM && err != -ENODEV)
+ bt_dev_err(hdev, "urb %p submission failed (%d)",
+ urb, -err);
+ usb_unanchor_urb(urb);
+ }
+
+ usb_free_urb(urb);
+
+ return err;
+}
+
+static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
+ struct btmtk_hci_wmt_params *wmt_params)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
+ u32 hlen, status = BTMTK_WMT_INVALID;
+ struct btmtk_hci_wmt_evt *wmt_evt;
+ struct btmtk_hci_wmt_cmd wc;
+ struct btmtk_wmt_hdr *hdr;
+ int err;
+
+ /* Submit control IN URB on demand to process the WMT event */
+ err = btusb_mtk_submit_wmt_recv_urb(hdev);
+ if (err < 0)
+ return err;
+
+ /* Send the WMT command and wait until the WMT event returns */
+ hlen = sizeof(*hdr) + wmt_params->dlen;
+ if (hlen > 255)
+ return -EINVAL;
+
+ hdr = (struct btmtk_wmt_hdr *)&wc;
+ hdr->dir = 1;
+ hdr->op = wmt_params->op;
+ hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
+ hdr->flag = wmt_params->flag;
+ memcpy(wc.data, wmt_params->data, wmt_params->dlen);
+
+ set_bit(BTMTKUSB_TX_WAIT_VND_EVT, &data->tx_state);
+
+ err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
+
+ if (err < 0) {
+ clear_bit(BTMTKUSB_TX_WAIT_VND_EVT, &data->tx_state);
+ return err;
+ }
+
+ /* The vendor specific WMT commands are all answered by a vendor
+ * specific event and will have the Command Status or Command
+ * Complete as with usual HCI command flow control.
+ *
+ * After sending the command, wait for BTMTKUSB_TX_WAIT_VND_EVT
+ * state to be cleared. The driver specific event receive routine
+ * will clear that state and with that indicate completion of the
+ * WMT command.
+ */
+ err = wait_on_bit_timeout(&data->tx_state, BTMTKUSB_TX_WAIT_VND_EVT,
+ TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
+ if (err == -EINTR) {
+ bt_dev_err(hdev, "Execution of wmt command interrupted");
+ clear_bit(BTMTKUSB_TX_WAIT_VND_EVT, &data->tx_state);
+ return err;
+ }
+
+ if (err) {
+ bt_dev_err(hdev, "Execution of wmt command timed out");
+ clear_bit(BTMTKUSB_TX_WAIT_VND_EVT, &data->tx_state);
+ return -ETIMEDOUT;
+ }
+
+ /* Parse and handle the return WMT event */
+ wmt_evt = (struct btmtk_hci_wmt_evt *)data->rx_skb->data;
+ if (wmt_evt->whdr.op != hdr->op) {
+ bt_dev_err(hdev, "Wrong op received %d expected %d",
+ wmt_evt->whdr.op, hdr->op);
+ err = -EIO;
+ goto err_free_skb;
+ }
+
+ switch (wmt_evt->whdr.op) {
+ case BTMTK_WMT_SEMAPHORE:
+ if (wmt_evt->whdr.flag == 2)
+ status = BTMTK_WMT_PATCH_UNDONE;
+ else
+ status = BTMTK_WMT_PATCH_DONE;
+ break;
+ case BTMTK_WMT_FUNC_CTRL:
+ wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
+ if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
+ status = BTMTK_WMT_ON_DONE;
+ else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
+ status = BTMTK_WMT_ON_PROGRESS;
+ else
+ status = BTMTK_WMT_ON_UNDONE;
+ break;
+ };
+
+ if (wmt_params->status)
+ *wmt_params->status = status;
+
+err_free_skb:
+ kfree_skb(data->rx_skb);
+
+ return err;
+}
+
+static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ size_t fw_size;
+ int err, dlen;
+ u8 flag;
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
+ return err;
+ }
+
+ fw_ptr = fw->data;
+ fw_size = fw->size;
+
+ /* The size of patch header is 30 bytes, should be skip */
+ if (fw_size < 30)
+ goto err_release_fw;
+
+ fw_size -= 30;
+ fw_ptr += 30;
+ flag = 1;
+
+ wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
+ wmt_params.status = NULL;
+
+ while (fw_size > 0) {
+ dlen = min_t(int, 250, fw_size);
+
+ /* Tell deivice the position in sequence */
+ if (fw_size - dlen <= 0)
+ flag = 3;
+ else if (fw_size < fw->size - 30)
+ flag = 2;
+
+ wmt_params.flag = flag;
+ wmt_params.dlen = dlen;
+ wmt_params.data = fw_ptr;
+
+ err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+ err);
+ goto err_release_fw;
+ }
+
+ fw_size -= dlen;
+ fw_ptr += dlen;
+ }
+
+ wmt_params.op = BTMTK_WMT_RST;
+ wmt_params.flag = 4;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = NULL;
+
+ /* Activate funciton the firmware providing to */
+ err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
+ return err;
+ }
+
+err_release_fw:
+ release_firmware(fw);
+
+ return err;
+}
+
+static int btusb_mtk_func_query(struct hci_dev *hdev)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ int status, err;
+ u8 param = 0;
+
+ /* Query whether the function is enabled */
+ wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 4;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = &status;
+
+ err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to query function status (%d)", err);
+ return err;
+ }
+
+ return status;
+}
+
+static int btusb_mtk_reg_read(struct btusb_data *data, u32 reg, u32 *val)
+{
+ int pipe, err, size = sizeof(u32);
+ void *buf;
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ pipe = usb_rcvctrlpipe(data->udev, 0);
+ err = usb_control_msg(data->udev, pipe, 0x63,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ reg >> 16, reg & 0xffff,
+ buf, size, USB_CTRL_SET_TIMEOUT);
+ if (err < 0)
+ goto err_free_buf;
+
+ *val = get_unaligned_le32(buf);
+
+err_free_buf:
+ kfree(buf);
+
+ return err;
+}
+
+static int btusb_mtk_id_get(struct btusb_data *data, u32 *id)
+{
+ return btusb_mtk_reg_read(data, 0x80000008, id);
+}
+
+static int btusb_mtk_setup(struct hci_dev *hdev)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_params wmt_params;
+ ktime_t calltime, delta, rettime;
+ unsigned long long duration;
+ int err, status;
+ const char *fwname;
+ u32 dev_id;
+ u8 param;
+
+ calltime = ktime_get();
+
+ err = btusb_mtk_id_get(data, &dev_id);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to get device id (%d)", err);
+ return err;
+ }
+
+ switch (dev_id) {
+ case 0x7668:
+ fwname = FIRMWARE_MT7668;
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported support hardware variant (%08x)",
+ dev_id);
+ return -ENODEV;
+ }
+
+ /* Query whether the firmware is already download */
+ wmt_params.op = BTMTK_WMT_SEMAPHORE;
+ wmt_params.flag = 1;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = &status;
+
+ err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
+ return err;
+ }
+
+ if (status == BTMTK_WMT_PATCH_DONE) {
+ bt_dev_info(hdev, "firmware already downloaded");
+ goto ignore_setup_fw;
+ }
+
+ /* Setup a firmware which the device definitely requires */
+ err = btusb_mtk_setup_firmware(hdev, fwname);
+ if (err < 0)
+ return err;
+
+ignore_setup_fw:
+ err = readx_poll_timeout(btusb_mtk_func_query, hdev, status,
+ status < 0 || status != BTMTK_WMT_ON_PROGRESS,
+ 2000, 5000000);
+ /* -ETIMEDOUT happens */
+ if (err < 0)
+ return err;
+
+ /* The other errors happen in btusb_mtk_func_query */
+ if (status < 0)
+ return status;
+
+ if (status == BTMTK_WMT_ON_DONE) {
+ bt_dev_info(hdev, "function already on");
+ goto ignore_func_on;
+ }
+
+ /* Enable Bluetooth protocol */
+ param = 1;
+ wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 0;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = NULL;
+
+ err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+ return err;
+ }
+
+ignore_func_on:
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Device setup in %llu usecs", duration);
+
+ return 0;
+}
+
+static int btusb_mtk_shutdown(struct hci_dev *hdev)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ u8 param = 0;
+ int err;
+
+ /* Disable the device */
+ wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 0;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = NULL;
+
+ err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int btusb_mtk_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ struct hci_event_hdr *hdr = (void *)skb->data;
+ int err;
+
+ /* Fix up the vendor event id with 0xff for vendor specific instead
+ * of 0xe4 so that event send via monitoring socket can be parsed
+ * properly.
+ */
+ if (hdr->evt == 0xe4)
+ hdr->evt = 0xff;
+
+ /* When someone waits for the WMT event, the skb is being cloned and
+ * being processed the events from there then.
+ */
+ if (test_bit(BTMTKUSB_TX_WAIT_VND_EVT, &data->tx_state)) {
+ data->rx_skb = skb_clone(skb, GFP_KERNEL);
+ if (!data->rx_skb)
+ return -ENOMEM;
+ }
+
+ err = hci_recv_frame(hdev, skb);
+
+ if (hdr->evt == 0xff) {
+ if (test_and_clear_bit(BTMTKUSB_TX_WAIT_VND_EVT,
+ &data->tx_state)) {
+ /* Barrier to sync with other CPUs */
+ smp_mb__after_atomic();
+ wake_up_bit(&data->tx_state, BTMTKUSB_TX_WAIT_VND_EVT);
+ }
+ }
+
+ return err;
+}
+
+MODULE_FIRMWARE(FIRMWARE_MT7668);
+#endif
+
#ifdef CONFIG_PM
/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
static int marvell_config_oob_wake(struct hci_dev *hdev)
@@ -3031,6 +3569,17 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_MARVELL)
hdev->set_bdaddr = btusb_set_bdaddr_marvell;

+#ifdef CONFIG_BT_HCIBTUSB_MTK
+ if (id->driver_info & BTUSB_MEDIATEK) {
+ hdev->setup = btusb_mtk_setup;
+ hdev->shutdown = btusb_mtk_shutdown;
+ hdev->manufacturer = 70;
+ set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+
+ data->recv_event = btusb_mtk_recv_event;
+ }
+#endif
+
if (id->driver_info & BTUSB_SWAVE) {
set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
--
2.7.4