Re: [PATCH 1/4] ARM: dts: exynos: Add missing used PMIC regulators on Exynos5422 Odroid boards

From: Anand Moon
Date: Mon Aug 13 2018 - 02:37:18 EST


Hi Krzysztof,

On Sun, 12 Aug 2018 at 18:55, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> On 11 August 2018 at 08:39, Anand Moon <linux.amoon@xxxxxxxxx> wrote:
> > Hi Krzysztof,
> >
> > These patches should also be ported to u-boot to enable PMIC.
> >
> > I was just looking into S2MPS11B data sheet
> > According to the 1.2 Key Features of S2MPS11
> >
> > BUCK1, BUCK2, BUCK3, BUCK4, BUCK6 have (0.65 V to 1.6 V) min /max range.
> > BUCK5 have (0.65 V to 2.0 V) min /max range.
> > BUCK7 have (1.2 V to 1.5 V) min / max range.
> > BUCK8 have (1.8 V to 2.1 V) min / max range.
> > BUCK10 have (0.75 V to 1.4 V) min / max range.
> >
> > BUCKBOST9 (3.0 V to 3.75 V) min / max range.
> >
> > LDO1, LDO6, LDO11, LDO22, LDO23, LDO27, LDO35 (0.8 V to 2.375 V) min / max range
> >
> > LDO2, LDO3, LDO5, LDO7, LDO9, LDO10, LD012, LDO13, LDO14, LDO15,
> > LDO16, LDO17, LDO18, LDO19, LDO20, LD021, LDO24, LDO25, LDO26,
> > LDO28, LDO29, LDO30, LDO31, LDO32, LDO33, LDO34, LDO36, LDO37, LDO38
> > (0.8 V to 3.95 V) min / max range
> >
> > I am aware off we have configures the min/max range as per board schematics.
> > but each regulator support dynamic voltage scale and have different
> > turn on/off voltage and current rating.
> >
> > So why are we not setting the regulator-min-microvolt /
> > regulator-max-microvolt as per datasheets.
> > Please correct me if I am wrong.
>
> Which regulators are not configured as in datasheet?
>
> Best regards,
> Krzysztof

Almost all the regulator have some miss default match of min/max setting.
I have tried to adjust the setting on top your above patches.

I am attaching my patch diff for testing.
I have have perform some stress testing and found no issue at my end.

Best Regards
-Anand

Attachment: regulator.patch
Description: Binary data