[PATCH v1 06/10] thermal: tsens: Add the SROT address map

From: Amit Kucheria
Date: Thu Aug 09 2018 - 08:33:21 EST


On platforms whose device trees specify two address spaces for TSENS, the
second one points to the SROT registers. Initialise the SROT map on those
platforms.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
drivers/thermal/qcom/tsens-common.c | 14 ++++++++++++--
drivers/thermal/qcom/tsens.h | 1 +
2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 0585084630b3..0b8a793f15f4 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -117,16 +117,26 @@ static const struct regmap_config tsens_config = {

int __init init_common(struct tsens_device *tmdev)
{
- void __iomem *tm_base;
+ void __iomem *tm_base, *srot_base;
struct resource *res;
struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);

if (!op)
return -EINVAL;

- /* The driver only uses the TM register address space for now */
if (op->num_resources > 1) {
+ /* DT with separate SROT and TM address space */
tmdev->tm_offset = 0;
+ res = platform_get_resource(op, IORESOURCE_MEM, 1);
+ srot_base = devm_ioremap_resource(&op->dev, res);
+ if (IS_ERR(srot_base))
+ return PTR_ERR(srot_base);
+
+ tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev,
+ srot_base, &tsens_config);
+ if (IS_ERR(tmdev->srot_map))
+ return PTR_ERR(tmdev->srot_map);
+
} else {
/* old DTs where SROT and TM were in a contiguous 2K block */
tmdev->tm_offset = 0x1000;
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 58e98c4d3a8b..b9c4bcf255fa 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -70,6 +70,7 @@ struct tsens_device {
struct device *dev;
u32 num_sensors;
struct regmap *tm_map;
+ struct regmap *srot_map;
u32 tm_offset;
struct tsens_context ctx;
const struct tsens_ops *ops;
--
2.17.1