[PATCH v4 3/3] clk: meson: add sub MMC clock controller driver

[Yixun Lan]

The patch will add a MMC clock controller driver which used by MMC or NAND,
It provide a mux and divider clock, and three phase clocks - core, tx, tx.

Two clocks are provided as the parent of MMC clock controller from
upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform.

To specify which clock the MMC or NAND driver may consume,
the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header
can be used in the device tree sources.

Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx>
---
 drivers/clk/meson/Kconfig    |  10 ++
 drivers/clk/meson/Makefile   |   1 +
 drivers/clk/meson/mmc-clkc.c | 275 +++++++++++++++++++++++++++++++++++
 3 files changed, 286 insertions(+)
 create mode 100644 drivers/clk/meson/mmc-clkc.c

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f682b4..8b8ccbcfed1d 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -15,6 +15,16 @@ config COMMON_CLK_MESON_AO
 	select COMMON_CLK_REGMAP_MESON
 	select RESET_CONTROLLER
 
+config COMMON_CLK_MMC_MESON
+	tristate "Meson MMC Sub Clock Controller Driver"
+	depends on COMMON_CLK_AMLOGIC
+	select MFD_SYSCON
+	select REGMAP
+	help
+	  Support for the MMC sub clock controller on Amlogic Meson Platform,
+	  which include S905 (GXBB, GXL), A113D/X (AXG) devices.
+	  Say Y if you want this clock enabled.
+
 config COMMON_CLK_REGMAP_MESON
 	bool
 	select REGMAP
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 39ce5661b654..31c16d524a4b 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
+obj-$(CONFIG_COMMON_CLK_MMC_MESON) 	+= mmc-clkc.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c
new file mode 100644
index 000000000000..6aa055f7e62c
--- /dev/null
+++ b/drivers/clk/meson/mmc-clkc.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Amlogic Meson MMC Sub Clock Controller Driver
+ *
+ * Copyright (c) 2017 Baylibre SAS.
+ * Author: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Yixun Lan <yixun.lan@xxxxxxxxxxx>
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/amlogic,mmc-clkc.h>
+
+#include "clkc.h"
+
+/* clock ID used by internal driver */
+#define CLKID_MMC_MUX			0
+
+#define SD_EMMC_CLOCK			0
+#define   CLK_DIV_MASK			GENMASK(5, 0)
+#define   CLK_SRC_MASK			GENMASK(7, 6)
+#define   CLK_CORE_PHASE_MASK		GENMASK(9, 8)
+#define   CLK_TX_PHASE_MASK		GENMASK(11, 10)
+#define   CLK_RX_PHASE_MASK		GENMASK(13, 12)
+#define   CLK_V2_TX_DELAY_MASK		GENMASK(19, 16)
+#define   CLK_V2_RX_DELAY_MASK		GENMASK(23, 20)
+#define   CLK_V2_ALWAYS_ON		BIT(24)
+
+#define   CLK_V3_TX_DELAY_MASK		GENMASK(21, 16)
+#define   CLK_V3_RX_DELAY_MASK		GENMASK(27, 22)
+#define   CLK_V3_ALWAYS_ON		BIT(28)
+
+#define   CLK_DELAY_STEP_PS		200
+#define   CLK_PHASE_STEP		30
+#define   CLK_PHASE_POINT_NUM		(360 / CLK_PHASE_STEP)
+
+#define MUX_CLK_NUM_PARENTS		2
+#define MMC_MAX_CLKS			5
+
+struct mmc_clkc_data {
+	struct meson_clk_phase_delay_data	tx;
+	struct meson_clk_phase_delay_data	rx;
+};
+
+static struct clk_regmap_mux_data mmc_clkc_mux_data = {
+	.offset		= SD_EMMC_CLOCK,
+	.mask		= 0x3,
+	.shift		= 6,
+	.flags		= CLK_DIVIDER_ROUND_CLOSEST,
+};
+
+static struct clk_regmap_div_data mmc_clkc_div_data = {
+	.offset		= SD_EMMC_CLOCK,
+	.shift		= 0,
+	.width		= 6,
+	.flags		= CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_ONE_BASED,
+};
+
+static struct meson_clk_phase_delay_data mmc_clkc_core_phase_delay = {
+	.phase_mask	= CLK_CORE_PHASE_MASK,
+};
+
+static const struct mmc_clkc_data mmc_clkc_gx_data = {
+	{
+		.phase_mask	= CLK_TX_PHASE_MASK,
+		.delay_mask	= CLK_V2_TX_DELAY_MASK,
+		.delay_step_ps	= CLK_DELAY_STEP_PS,
+	},
+	{
+		.phase_mask	= CLK_RX_PHASE_MASK,
+		.delay_mask	= CLK_V2_RX_DELAY_MASK,
+		.delay_step_ps	= CLK_DELAY_STEP_PS,
+	},
+};
+
+static const struct mmc_clkc_data mmc_clkc_axg_data = {
+	{
+		.phase_mask	= CLK_TX_PHASE_MASK,
+		.delay_mask	= CLK_V3_TX_DELAY_MASK,
+		.delay_step_ps	= CLK_DELAY_STEP_PS,
+	},
+	{
+		.phase_mask	= CLK_RX_PHASE_MASK,
+		.delay_mask	= CLK_V3_RX_DELAY_MASK,
+		.delay_step_ps	= CLK_DELAY_STEP_PS,
+	},
+};
+
+static const struct of_device_id mmc_clkc_match_table[] = {
+	{
+		.compatible	= "amlogic,gx-mmc-clkc",
+		.data		= &mmc_clkc_gx_data
+	},
+	{
+		.compatible	= "amlogic,axg-mmc-clkc",
+		.data		= &mmc_clkc_axg_data
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mmc_clkc_match_table);
+
+static struct clk_regmap *
+mmc_clkc_register_clk(struct device *dev, struct regmap *map,
+		      struct clk_init_data *init,
+		      const char *suffix, void *data)
+{
+	struct clk_regmap *clk;
+	char *name;
+	int ret;
+
+	clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return ERR_PTR(-ENOMEM);
+
+	name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	init->name = name;
+
+	clk->map = map;
+	clk->data = data;
+	clk->hw.init = init;
+
+	ret = devm_clk_hw_register(dev, &clk->hw);
+	if (ret)
+		clk = ERR_PTR(ret);
+
+	kfree(name);
+	return clk;
+}
+
+static struct clk_regmap *mmc_clkc_register_mux(struct device *dev,
+						struct regmap *map)
+{
+	const char *parent_names[MUX_CLK_NUM_PARENTS];
+	struct clk_init_data init;
+	struct clk_regmap *mux;
+	struct clk *clk;
+	int i;
+
+	for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+		char name[8];
+
+		snprintf(name, sizeof(name), "clkin%d", i);
+		clk = devm_clk_get(dev, name);
+		if (IS_ERR(clk)) {
+			if (clk != ERR_PTR(-EPROBE_DEFER))
+				dev_err(dev, "Missing clock %s\n", name);
+			return ERR_PTR((long)clk);
+		}
+
+		parent_names[i] = __clk_get_name(clk);
+	}
+
+	init.ops = &clk_regmap_mux_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = parent_names;
+	init.num_parents = MUX_CLK_NUM_PARENTS;
+
+	mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data);
+	if (IS_ERR(mux))
+		dev_err(dev, "Mux clock registration failed\n");
+
+	return mux;
+}
+
+static struct clk_regmap *
+mmc_clkc_register_other_clk(struct device *dev, struct regmap *map,
+			    char *suffix, char *parent_suffix,
+			    unsigned long flags,
+			    const struct clk_ops *ops, void *data)
+{
+	struct clk_init_data init;
+	struct clk_regmap *clk;
+	char *parent;
+
+	parent = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), parent_suffix);
+	if (!parent)
+		return ERR_PTR(-ENOMEM);
+
+	init.ops = ops;
+	init.flags = flags;
+	init.parent_names = (const char* const []){ parent, };
+	init.num_parents = 1;
+
+	clk = mmc_clkc_register_clk(dev, map, &init, suffix, data);
+	if (IS_ERR(clk))
+		dev_err(dev, "Core %s clock registration failed\n", suffix);
+
+	kfree(parent);
+	return clk;
+}
+
+static int mmc_clkc_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *onecell_data;
+	struct device *dev = &pdev->dev;
+	struct mmc_clkc_data *data;
+	struct regmap *map;
+	struct clk_regmap *mux, *div, *core, *rx, *tx;
+
+	data = (struct mmc_clkc_data *)of_device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
+	map = syscon_node_to_regmap(dev->of_node);
+	if (IS_ERR(map)) {
+		dev_err(dev, "could not find mmc clock controller\n");
+		return PTR_ERR(map);
+	}
+
+	onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) +
+				    sizeof(*onecell_data->hws) * MMC_MAX_CLKS,
+				    GFP_KERNEL);
+	if (!onecell_data)
+		return -ENOMEM;
+
+	mux = mmc_clkc_register_mux(dev, map);
+	if (IS_ERR(mux))
+		return PTR_ERR(mux);
+
+	div = mmc_clkc_register_other_clk(dev, map, "div", "mux",
+					  CLK_SET_RATE_PARENT,
+					  &clk_regmap_divider_ops,
+					  &mmc_clkc_div_data);
+	if (IS_ERR(div))
+		return PTR_ERR(div);
+
+	core = mmc_clkc_register_other_clk(dev, map, "core", "div",
+					   CLK_SET_RATE_PARENT,
+					   &meson_clk_phase_delay_ops,
+					   &mmc_clkc_core_phase_delay);
+	if (IS_ERR(core))
+		return PTR_ERR(core);
+
+	rx = mmc_clkc_register_other_clk(dev, map, "rx", "core", 0,
+					 &meson_clk_phase_delay_ops,
+					 &data->rx);
+	if (IS_ERR(rx))
+		return PTR_ERR(rx);
+
+	tx = mmc_clkc_register_other_clk(dev, map, "tx", "core", 0,
+					 &meson_clk_phase_delay_ops,
+					 &data->tx);
+	if (IS_ERR(tx))
+		return PTR_ERR(tx);
+
+	onecell_data->hws[CLKID_MMC_MUX]		= &mux->hw,
+	onecell_data->hws[CLKID_MMC_DIV]		= &div->hw,
+	onecell_data->hws[CLKID_MMC_PHASE_CORE]		= &core->hw,
+	onecell_data->hws[CLKID_MMC_PHASE_RX]		= &rx->hw,
+	onecell_data->hws[CLKID_MMC_PHASE_TX]		= &tx->hw,
+	onecell_data->num				= MMC_MAX_CLKS;
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   onecell_data);
+}
+
+static struct platform_driver mmc_clkc_driver = {
+	.probe		= mmc_clkc_probe,
+	.driver		= {
+		.name	= "meson-mmc-clkc",
+		.of_match_table = of_match_ptr(mmc_clkc_match_table),
+	},
+};
+
+module_platform_driver(mmc_clkc_driver);
-- 
2.17.1