[PATCH 3/7] arm64: dts: allwinner: h5: Add thermal sensor controller node

From: Emmanuel Vadot
Date: Sat Aug 04 2018 - 03:04:20 EST


This add the ths controller for the H5 and the nvmem cell for the
calibration data on the sid node.

Signed-off-by: Emmanuel Vadot <manu@xxxxxxxxxxx>
---
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 9838acaeea58..908237bc5804 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -97,6 +97,25 @@
sid: eeprom@1c14000 {
compatible = "allwinner,sun50i-h5-sid";
reg = <0x1c14000 0x400>;
+
+ ths_calib: calib@234 {
+ reg = <0x234 0x4>;
+ };
+ };
+
+ ths: thermal_sensor@1c25000 {
+ compatible = "allwinner,sun50i-h5-ths";
+ reg = <0x01c25000 0x100>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "apb", "ths";
+ resets = <&ccu RST_BUS_THS>;
+ reset-names = "apb";
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+
+ nvmem-cells = <&ths_calib>;
+ nvmem-cell-names = "ths-calib";
};
};
};
--
2.18.0