[PATCH v2 09/18] serial: intel: Change ltq_w32_mask to asc_update_bits

From: Songjun Wu
Date: Thu Aug 02 2018 - 23:04:13 EST


ltq prefix is platform specific function, asc prefix
is more generic.

Signed-off-by: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
---

Changes in v2: None

drivers/tty/serial/lantiq.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 836ca51460f2..e36e6a267e7a 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -114,6 +114,13 @@ struct ltq_uart_port {
unsigned int err_irq;
};

+static inline void asc_update_bits(u32 clear, u32 set, void __iomem *reg)
+{
+ u32 tmp = readl(reg);
+
+ writel((tmp & ~clear) | set, reg);
+}
+
static inline struct
ltq_uart_port *to_ltq_uart_port(struct uart_port *port)
{
@@ -164,16 +171,16 @@ lqasc_rx_chars(struct uart_port *port)
if (rsr & ASCSTATE_ANY) {
if (rsr & ASCSTATE_PE) {
port->icount.parity++;
- ltq_w32_mask(0, ASCWHBSTATE_CLRPE,
+ asc_update_bits(0, ASCWHBSTATE_CLRPE,
port->membase + LTQ_ASC_WHBSTATE);
} else if (rsr & ASCSTATE_FE) {
port->icount.frame++;
- ltq_w32_mask(0, ASCWHBSTATE_CLRFE,
+ asc_update_bits(0, ASCWHBSTATE_CLRFE,
port->membase + LTQ_ASC_WHBSTATE);
}
if (rsr & ASCSTATE_ROE) {
port->icount.overrun++;
- ltq_w32_mask(0, ASCWHBSTATE_CLRROE,
+ asc_update_bits(0, ASCWHBSTATE_CLRROE,
port->membase + LTQ_ASC_WHBSTATE);
}

@@ -253,7 +260,7 @@ lqasc_err_int(int irq, void *_port)
struct uart_port *port = (struct uart_port *)_port;
spin_lock_irqsave(&ltq_asc_lock, flags);
/* clear any pending interrupts */
- ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
+ asc_update_bits(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE);
spin_unlock_irqrestore(&ltq_asc_lock, flags);
return IRQ_HANDLED;
@@ -305,7 +312,7 @@ lqasc_startup(struct uart_port *port)
clk_enable(ltq_port->clk);
port->uartclk = clk_get_rate(ltq_port->fpiclk);

- ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
+ asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
port->membase + LTQ_ASC_CLC);

ltq_w32(0, port->membase + LTQ_ASC_PISEL);
@@ -321,7 +328,7 @@ lqasc_startup(struct uart_port *port)
* setting enable bits
*/
wmb();
- ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
+ asc_update_bits(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
ASCCON_ROEN, port->membase + LTQ_ASC_CON);

retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
@@ -365,9 +372,9 @@ lqasc_shutdown(struct uart_port *port)
free_irq(ltq_port->err_irq, port);

ltq_w32(0, port->membase + LTQ_ASC_CON);
- ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
+ asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
port->membase + LTQ_ASC_RXFCON);
- ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
+ asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
port->membase + LTQ_ASC_TXFCON);
if (!IS_ERR(ltq_port->clk))
clk_disable(ltq_port->clk);
@@ -439,7 +446,7 @@ lqasc_set_termios(struct uart_port *port,
spin_lock_irqsave(&ltq_asc_lock, flags);

/* set up CON */
- ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON);
+ asc_update_bits(0, con, port->membase + LTQ_ASC_CON);

/* Set baud rate - take a divider of 2 into account */
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
@@ -447,19 +454,19 @@ lqasc_set_termios(struct uart_port *port,
divisor = divisor / 2 - 1;

/* disable the baudrate generator */
- ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
+ asc_update_bits(ASCCON_R, 0, port->membase + LTQ_ASC_CON);

/* make sure the fractional divider is off */
- ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
+ asc_update_bits(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);

/* set up to use divisor of 2 */
- ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
+ asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);

/* now we can write the new baudrate into the register */
ltq_w32(divisor, port->membase + LTQ_ASC_BG);

/* turn the baudrate generator back on */
- ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON);
+ asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON);

/* enable rx */
ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
--
2.11.0