[PATCH v2 00/32] Device Tree Updates for GTA04 (A3/A4/A5 variants)

From: H. Nikolaus Schaller
Date: Tue Jul 31 2018 - 03:15:10 EST


* Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
asked why we have reg=<0> for port@1.
Based on his comment we have removed the change for
the opa362 reg property in the DT, but worked out a correct
fix in the opa362 driver which solves the issue better.
See: https://lore.kernel.org/patchwork/patch/968407/
* Ladislav Michl <ladis@xxxxxxxxxxxxxx>
has found a typo and we discussed NAND/OneNAND and
how the partitions should be setup. A better solution
would be to do it completely by u-boot, but unless we have
that, we must fix it here.
* we omit the patch that replaces ti,non-removable by non-removable
since additional internal tests have shown that it makes
problems with finding the rootfs boot partition.
* instead we add a patch that explicitly sets broken-cd for mmc1.

PATCH V1 2018-07-25 09:00:42:
We have not upstreamed significant improvements collected
in the GTA04 vendor kernel tree for some years. The result
is that distribution kernels derived from upstream (e.g.
Debian) lag behind and miss significant features and fixes.


H. Nikolaus Schaller (32):
ARM: dts: omap3-gta04: fix typo in backlight pins node name
ARM: dts: omap3-gta04: fix some whitespace and tab style errors
ARM: dts: omap3-gta04: give spi_lcd node a label so that we can
overwrite in other DTS files
ARM: dts: omap3-gta04: fixes for tvout / venc
ARM: dts: omap3-gta04: add devconf1 setup for correct tvout pins
ARM: dts: omap3-gta04: tvout: enable as display1 alias
ARM: dts: omap3-gta04: fix touchscreen tsc2007
ARM: dts: omap3-gta04: add pinmux for bmp085 EOC interrupt
ARM: dts: omap3-gta04: make NAND partitions compatible with recent
U-Boot
ARM: dts: omap3-gta04: update gpmc NAND setup
ARM: dts: omap3-gta04: keep vpll2 always on
ARM: dts: omap3-gta04: add a comment how to reference the tca6507 gpio
ARM: dts: omap3-gta04: add warning comment to vaux2 regulator
ARM: dts: omap3-gta04: explicitly describe that mmc1 has no CD/WP
ARM: dts: omap3-gta04: make use of input event include file and
constants
ARM: dts: omap3-gta04: map antenna detect GPIO to SW_LINEIN_INSERT key
event
ARM: dts: omap3-gta04: add camera interface parallel port
ARM: dts: omap3-gta04: add camera pinmux
ARM: dts: omap3-gta04: add mcbsp (audio subsystem) pinmux
ARM: dts: omap3-gta04: add devconf0 setup for mcbsp1 clock pins
ARM: dts: omap3-gta04: add mcbsp (audio subsystem) nodes
ARM: dts: omap3-gta04a3: fix model name for A3 variant
ARM: dts: omap3-gta04a4: fix model name for A4 variant
ARM: dts: omap3-gta04a5: fix copyright of A5 variant
ARM: dts: omap3-gta04a5: fix model name
ARM: dts: omap3-gta04a5: fix whitepsace and tab style
ARM: dts: omap3-gta04a5: add support for PPS
ARM: dts: omap3-gta04a5: disable IrDA receiver to save power
ARM: dts: omap3-gta04a5: add support for ti,wl1837 module
ARM: dts: omap3-gta04a5: uses different sensors than gta04a4
ARM: dts: omap3-gta04a5: define pinmux for bluetooth enable of
ti,wl1837 module
ARM: dts: omap3-gta04a5one: define GTA04A5 variant with OneNAND

arch/arm/boot/dts/omap3-gta04.dtsi | 248 +++++++++++++++++++++++++++++----
arch/arm/boot/dts/omap3-gta04a3.dts | 2 +-
arch/arm/boot/dts/omap3-gta04a4.dts | 2 +-
arch/arm/boot/dts/omap3-gta04a5.dts | 129 ++++++++++++++++-
arch/arm/boot/dts/omap3-gta04a5one.dts | 114 +++++++++++++++
5 files changed, 462 insertions(+), 33 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-gta04a5one.dts

--
2.12.2