[PATCH v2 18/32] ARM: dts: omap3-gta04: add camera pinmux

From: H. Nikolaus Schaller
Date: Tue Jul 31 2018 - 03:12:49 EST


ISP needs camera pinmux (which is referenced by the camera node).

Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 3d3876782a00..89e16e1897f7 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -330,6 +330,32 @@
OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
>;
};
+
+ camera_pins: pinmux_camera_pins {
+ pinctrl-single,pins = <
+ /* set up parallel camera interface */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+ >;
+ };
};

&omap3_pmx_core2 {
--
2.12.2