[PATCH 16/16] staging:rtl8192u: Rename eRFPath - Style

From: John Whitmore
Date: Thu Jul 26 2018 - 15:25:17 EST


Rename the variable eRFPath to e_rfpath. This change resolves a
checkpatch issue with CamelCase naming. The variable name is used both
as a parameter name in function definitions, function prototypes and as
a local variable.

This change is purely a coding style change which should have no impact
on runtime code execution.

Signed-off-by: John Whitmore <johnfwhitmore@xxxxxxxxx>
---
drivers/staging/rtl8192u/r819xU_phy.c | 120 +++++++++++++-------------
drivers/staging/rtl8192u/r819xU_phy.h | 10 +--
2 files changed, 65 insertions(+), 65 deletions(-)

diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index fb74b749fbcf..7ee10d49894b 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -34,11 +34,11 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
* function: This function checks different RF type to execute legal judgement.
* If RF Path is illegal, we will return false.
* input: net_device *dev
- * u32 eRFPath
+ * u32 e_rfpath
* output: none
* return: 0(illegal, false), 1(legal, true)
*****************************************************************************/
-u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath)
+u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 e_rfpath)
{
u8 ret = 1;
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -46,9 +46,9 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath)
if (priv->rf_type == RF_2T4R) {
ret = 0;
} else if (priv->rf_type == RF_1T2R) {
- if (eRFPath == RF90_PATH_A || eRFPath == RF90_PATH_B)
+ if (e_rfpath == RF90_PATH_A || e_rfpath == RF90_PATH_B)
ret = 1;
- else if (eRFPath == RF90_PATH_C || eRFPath == RF90_PATH_D)
+ else if (e_rfpath == RF90_PATH_C || e_rfpath == RF90_PATH_D)
ret = 0;
}
return ret;
@@ -101,18 +101,18 @@ u32 rtl8192_QueryBBReg(struct net_device *dev, u32 reg_addr, u32 bitmask)
}

static u32 phy_FwRFSerialRead(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 offset);

static void phy_FwRFSerialWrite(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 offset,
u32 data);

/******************************************************************************
* function: This function reads register from RF chip
* input: net_device *dev
- * rf90_radio_path_e eRFPath //radio path of A/B/C/D
+ * rf90_radio_path_e e_rfpath //radio path of A/B/C/D
* u32 offset //target address to be read
* output: none
* return: u32 readback value
@@ -124,12 +124,12 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
* ---need more spec for this information.
******************************************************************************/
static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
- enum rf90_radio_path_e eRFPath, u32 offset)
+ enum rf90_radio_path_e e_rfpath, u32 offset)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 ret = 0;
u32 new_offset = 0;
- BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
+ BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[e_rfpath];

rtl8192_setBBreg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData, 0);
/* Make sure RF register offset is correct */
@@ -138,20 +138,20 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
/* Switch page for 8256 RF IC */
if (priv->rf_chip == RF_8256) {
if (offset >= 31) {
- priv->RfReg0Value[eRFPath] |= 0x140;
+ priv->RfReg0Value[e_rfpath] |= 0x140;
/* Switch to Reg_Mode2 for Reg 31-45 */
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset,
bMaskDWord,
- priv->RfReg0Value[eRFPath]<<16);
+ priv->RfReg0Value[e_rfpath]<<16);
/* Modify offset */
new_offset = offset - 30;
} else if (offset >= 16) {
- priv->RfReg0Value[eRFPath] |= 0x100;
- priv->RfReg0Value[eRFPath] &= (~0x40);
+ priv->RfReg0Value[e_rfpath] |= 0x100;
+ priv->RfReg0Value[e_rfpath] &= (~0x40);
/* Switch to Reg_Mode1 for Reg16-30 */
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset,
bMaskDWord,
- priv->RfReg0Value[eRFPath]<<16);
+ priv->RfReg0Value[e_rfpath]<<16);

new_offset = offset - 15;
} else {
@@ -179,10 +179,10 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,

/* Switch back to Reg_Mode0 */
if (priv->rf_chip == RF_8256) {
- priv->RfReg0Value[eRFPath] &= 0xebf;
+ priv->RfReg0Value[e_rfpath] &= 0xebf;

rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord,
- priv->RfReg0Value[eRFPath] << 16);
+ priv->RfReg0Value[e_rfpath] << 16);
}

return ret;
@@ -191,7 +191,7 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
/******************************************************************************
* function: This function writes data to RF register
* input: net_device *dev
- * rf90_radio_path_e eRFPath //radio path of A/B/C/D
+ * rf90_radio_path_e e_rfpath //radio path of A/B/C/D
* u32 offset //target address to be written
* u32 data //the new register data to be written
* output: none
@@ -209,29 +209,29 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
* ---------------------------------------------------------------------------
*****************************************************************************/
static void rtl8192_phy_RFSerialWrite(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 offset,
u32 data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 DataAndAddr = 0, new_offset = 0;
- BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
+ BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[e_rfpath];

offset &= 0x3f;
if (priv->rf_chip == RF_8256) {

if (offset >= 31) {
- priv->RfReg0Value[eRFPath] |= 0x140;
+ priv->RfReg0Value[e_rfpath] |= 0x140;
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset,
bMaskDWord,
- priv->RfReg0Value[eRFPath] << 16);
+ priv->RfReg0Value[e_rfpath] << 16);
new_offset = offset - 30;
} else if (offset >= 16) {
- priv->RfReg0Value[eRFPath] |= 0x100;
- priv->RfReg0Value[eRFPath] &= (~0x40);
+ priv->RfReg0Value[e_rfpath] |= 0x100;
+ priv->RfReg0Value[e_rfpath] &= (~0x40);
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset,
bMaskDWord,
- priv->RfReg0Value[eRFPath]<<16);
+ priv->RfReg0Value[e_rfpath]<<16);
new_offset = offset - 15;
} else {
new_offset = offset;
@@ -250,15 +250,15 @@ static void rtl8192_phy_RFSerialWrite(struct net_device *dev,


if (offset == 0x0)
- priv->RfReg0Value[eRFPath] = data;
+ priv->RfReg0Value[e_rfpath] = data;

/* Switch back to Reg_Mode0 */
if (priv->rf_chip == RF_8256) {
if (offset != 0) {
- priv->RfReg0Value[eRFPath] &= 0xebf;
+ priv->RfReg0Value[e_rfpath] &= 0xebf;
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset,
bMaskDWord,
- priv->RfReg0Value[eRFPath] << 16);
+ priv->RfReg0Value[e_rfpath] << 16);
}
}
}
@@ -266,7 +266,7 @@ static void rtl8192_phy_RFSerialWrite(struct net_device *dev,
/******************************************************************************
* function: This function set specific bits to RF register
* input: net_device dev
- * rf90_radio_path_e eRFPath //radio path of A/B/C/D
+ * rf90_radio_path_e e_rfpath //radio path of A/B/C/D
* u32 reg_addr //target addr to be modified
* u32 bitmask //taget bit pos to be modified
* u32 data //value to be written
@@ -275,26 +275,26 @@ static void rtl8192_phy_RFSerialWrite(struct net_device *dev,
* notice:
*****************************************************************************/
void rtl8192_phy_SetRFReg(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 reg_addr, u32 bitmask, u32 data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 reg, bitshift;

- if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+ if (!rtl8192_phy_CheckIsLegalRFPath(dev, e_rfpath))
return;

if (priv->Rf_Mode == RF_OP_By_FW) {
if (bitmask != bMask12Bits) {
/* RF data is 12 bits only */
- reg = phy_FwRFSerialRead(dev, eRFPath, reg_addr);
+ reg = phy_FwRFSerialRead(dev, e_rfpath, reg_addr);
bitshift = ffs(bitmask) - 1;
reg &= ~bitmask;
reg |= data << bitshift;

- phy_FwRFSerialWrite(dev, eRFPath, reg_addr, reg);
+ phy_FwRFSerialWrite(dev, e_rfpath, reg_addr, reg);
} else {
- phy_FwRFSerialWrite(dev, eRFPath, reg_addr, data);
+ phy_FwRFSerialWrite(dev, e_rfpath, reg_addr, data);
}

udelay(200);
@@ -302,14 +302,14 @@ void rtl8192_phy_SetRFReg(struct net_device *dev,
} else {
if (bitmask != bMask12Bits) {
/* RF data is 12 bits only */
- reg = rtl8192_phy_RFSerialRead(dev, eRFPath, reg_addr);
+ reg = rtl8192_phy_RFSerialRead(dev, e_rfpath, reg_addr);
bitshift = ffs(bitmask) - 1;
reg &= ~bitmask;
reg |= data << bitshift;

- rtl8192_phy_RFSerialWrite(dev, eRFPath, reg_addr, reg);
+ rtl8192_phy_RFSerialWrite(dev, e_rfpath, reg_addr, reg);
} else {
- rtl8192_phy_RFSerialWrite(dev, eRFPath, reg_addr, data);
+ rtl8192_phy_RFSerialWrite(dev, e_rfpath, reg_addr, data);
}
}
}
@@ -324,20 +324,20 @@ void rtl8192_phy_SetRFReg(struct net_device *dev,
* notice:
*****************************************************************************/
u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 reg_addr, u32 bitmask)
{
u32 reg, bitshift;
struct r8192_priv *priv = ieee80211_priv(dev);


- if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+ if (!rtl8192_phy_CheckIsLegalRFPath(dev, e_rfpath))
return 0;
if (priv->Rf_Mode == RF_OP_By_FW) {
- reg = phy_FwRFSerialRead(dev, eRFPath, reg_addr);
+ reg = phy_FwRFSerialRead(dev, e_rfpath, reg_addr);
udelay(200);
} else {
- reg = rtl8192_phy_RFSerialRead(dev, eRFPath, reg_addr);
+ reg = rtl8192_phy_RFSerialRead(dev, e_rfpath, reg_addr);
}
bitshift = ffs(bitmask) - 1;
reg = (reg & bitmask) >> bitshift;
@@ -348,14 +348,14 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
/******************************************************************************
* function: We support firmware to execute RF-R/W.
* input: net_device *dev
- * rf90_radio_path_e eRFPath
+ * rf90_radio_path_e e_rfpath
* u32 offset
* output: none
* return: u32
* notice:
****************************************************************************/
static u32 phy_FwRFSerialRead(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 offset)
{
u32 reg = 0;
@@ -372,7 +372,7 @@ static u32 phy_FwRFSerialRead(struct net_device *dev,
/* 2. Write RF register address. bit 12-19 */
data |= ((offset&0xFF)<<12);
/* 3. Write RF path. bit 20-21 */
- data |= ((eRFPath&0x3)<<20);
+ data |= ((e_rfpath&0x3)<<20);
/* 4. Set RF read indicator. bit 22=0 */
/* 5. Trigger Fw to operate the command. bit 31 */
data |= 0x80000000;
@@ -412,7 +412,7 @@ static u32 phy_FwRFSerialRead(struct net_device *dev,
/******************************************************************************
* function: We support firmware to execute RF-R/W.
* input: net_device *dev
- * rf90_radio_path_e eRFPath
+ * rf90_radio_path_e e_rfpath
* u32 offset
* u32 data
* output: none
@@ -420,7 +420,7 @@ static u32 phy_FwRFSerialRead(struct net_device *dev,
* notice:
****************************************************************************/
static void phy_FwRFSerialWrite(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 offset, u32 data)
{
u8 time = 0;
@@ -436,7 +436,7 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
/* 2. Write RF register address. bit 12-19 */
data |= ((offset&0xFF)<<12);
/* 3. Write RF path. bit 20-21 */
- data |= ((eRFPath&0x3)<<20);
+ data |= ((e_rfpath&0x3)<<20);
/* 4. Set RF write indicator. bit 22=1 */
data |= 0x400000;
/* 5. Trigger Fw to operate the command. bit 31=1 */
@@ -688,14 +688,14 @@ static void rtl8192_InitBBRFRegDef(struct net_device *dev)
* sure whether BB and RF is OK
* input: net_device *dev
* hw90_block_e CheckBlock
- * rf90_radio_path_e eRFPath //only used when checkblock is
+ * rf90_radio_path_e e_rfpath //only used when checkblock is
* //HW90_BLOCK_RF
* output: none
* return: return whether BB and RF is ok (0:OK, 1:Fail)
* notice: This function may be removed in the ASIC
******************************************************************************/
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, enum hw90_block_e CheckBlock,
- enum rf90_radio_path_e eRFPath)
+ enum rf90_radio_path_e e_rfpath)
{
u8 ret = 0;
u32 i, CheckTimes = 4, reg = 0;
@@ -726,14 +726,14 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, enum hw90_block_e CheckBlock

case HW90_BLOCK_RF:
WriteData[i] &= 0xfff;
- rtl8192_phy_SetRFReg(dev, eRFPath,
+ rtl8192_phy_SetRFReg(dev, e_rfpath,
WriteAddr[HW90_BLOCK_RF],
bMask12Bits, WriteData[i]);
/* TODO: we should not delay for such a long time.
* Ask SD3
*/
usleep_range(1000, 1000);
- reg = rtl8192_phy_QueryRFReg(dev, eRFPath,
+ reg = rtl8192_phy_QueryRFReg(dev, e_rfpath,
WriteAddr[HW90_BLOCK_RF],
bMask12Bits);
usleep_range(1000, 1000);
@@ -962,18 +962,18 @@ void rtl8192_phy_updateInitGain(struct net_device *dev)
* function: This function read RF parameters from general head file,
* and do RF 3-wire
* input: net_device *dev
- * rf90_radio_path_e eRFPath
+ * rf90_radio_path_e e_rfpath
* output: none
* return: return code show if RF configuration is successful(0:pass, 1:fail)
* notice: Delay may be required for RF configuration
*****************************************************************************/
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
- enum rf90_radio_path_e eRFPath)
+ enum rf90_radio_path_e e_rfpath)
{

int i;

- switch (eRFPath) {
+ switch (e_rfpath) {
case RF90_PATH_A:
for (i = 0; i < RadioA_ArrayLength; i = i+2) {

@@ -981,7 +981,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
mdelay(100);
continue;
}
- rtl8192_phy_SetRFReg(dev, eRFPath,
+ rtl8192_phy_SetRFReg(dev, e_rfpath,
Rtl8192UsbRadioA_Array[i],
bMask12Bits,
Rtl8192UsbRadioA_Array[i+1]);
@@ -996,7 +996,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
mdelay(100);
continue;
}
- rtl8192_phy_SetRFReg(dev, eRFPath,
+ rtl8192_phy_SetRFReg(dev, e_rfpath,
Rtl8192UsbRadioB_Array[i],
bMask12Bits,
Rtl8192UsbRadioB_Array[i+1]);
@@ -1011,7 +1011,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
mdelay(100);
continue;
}
- rtl8192_phy_SetRFReg(dev, eRFPath,
+ rtl8192_phy_SetRFReg(dev, e_rfpath,
Rtl8192UsbRadioC_Array[i],
bMask12Bits,
Rtl8192UsbRadioC_Array[i+1]);
@@ -1026,7 +1026,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
mdelay(100);
continue;
}
- rtl8192_phy_SetRFReg(dev, eRFPath,
+ rtl8192_phy_SetRFReg(dev, e_rfpath,
Rtl8192UsbRadioD_Array[i],
bMask12Bits,
Rtl8192UsbRadioD_Array[i+1]);
@@ -1267,7 +1267,7 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
struct sw_chnl_cmd RfDependCmd[MAX_RFDEPENDCMD_CNT];
u32 RfDependCmdCnt;
struct sw_chnl_cmd *CurrentCmd = NULL;
- u8 eRFPath;
+ u8 e_rfpath;

RT_TRACE(COMP_CH, "%s() stage: %d, step: %d, channel: %d\n",
__func__, *stage, *step, channel);
@@ -1384,9 +1384,9 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
(u8)CurrentCmd->para_2);
break;
case CMD_ID_RF_WRITE_REG:
- for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) {
+ for (e_rfpath = 0; e_rfpath < RF90_PATH_MAX; e_rfpath++) {
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
+ (enum rf90_radio_path_e)e_rfpath,
CurrentCmd->para_1,
bZebra1_ChannelNum,
CurrentCmd->para_2);
diff --git a/drivers/staging/rtl8192u/r819xU_phy.h b/drivers/staging/rtl8192u/r819xU_phy.h
index 8ca869e8ee2f..c7ec3182857f 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.h
+++ b/drivers/staging/rtl8192u/r819xU_phy.h
@@ -41,28 +41,28 @@ enum rf90_radio_path_e {
RF90_PATH_MAX /* Max RF number 92 support */
};

-u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath);
+u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 e_rfpath);
void rtl8192_setBBreg(struct net_device *dev, u32 reg_addr,
u32 bitmask, u32 data);
u32 rtl8192_QueryBBReg(struct net_device *dev, u32 reg_addr, u32 bitmask);
void rtl8192_phy_SetRFReg(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 reg_addr, u32 bitmask, u32 data);
u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
- enum rf90_radio_path_e eRFPath,
+ enum rf90_radio_path_e e_rfpath,
u32 reg_addr, u32 bitmask);
void rtl8192_phy_configmac(struct net_device *dev);
void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType);
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev,
enum hw90_block_e CheckBlock,
- enum rf90_radio_path_e eRFPath);
+ enum rf90_radio_path_e e_rfpath);
void rtl8192_BBConfig(struct net_device *dev);
void rtl8192_phy_getTxPower(struct net_device *dev);
void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel);
void rtl8192_phy_RFConfig(struct net_device *dev);
void rtl8192_phy_updateInitGain(struct net_device *dev);
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
- enum rf90_radio_path_e eRFPath);
+ enum rf90_radio_path_e e_rfpath);

u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel);
void rtl8192_SetBWMode(struct net_device *dev,
--
2.18.0