Re: [PATCH 32/32] ARM: dts: omap3-gta04a5one: define GTA04A5 variant with OneNAND

[Ladislav Michl]

On Wed, Jul 25, 2018 at 08:59:04AM +0200, H. Nikolaus Schaller wrote:
> GTA04A5 has been produced with MCP chips either with
>  512MB RAM +  512MB NAND
>  512MB RAM + 1024MB NAND
> 1024MB RAM +  512MB OneNAND
> 
> RAM setup is done by U-Boot (MLO/SPL) but OneNAND needs
> a different setup of the GPMC. So we need to derive a
> DTB variant that modifies the gpmc and nand setup.

Just a suggestion... This way your user needs to know which variant is dealing
with. It is similar situation as with IGEPv2 with cames with various setup
either with NAND or OneNAND. Both NAND and OneNAND nodes are present in DTB
and enabled by U-Boot approriately. So single U-Boot binary and DTB is enough
to deal with all variants.

	ladis

> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/omap3-gta04a5one.dts | 114 +++++++++++++++++++++++++++++++++
>  1 file changed, 114 insertions(+)
>  create mode 100644 arch/arm/boot/dts/omap3-gta04a5one.dts
> 
> diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts
> new file mode 100644
> index 000000000000..9b7bbdc344b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-gta04a5one.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "omap3-gta04a5.dts"
> +
> +&omap3_pmx_core {
> +	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
> +
> +	gpmc_pins: pinmux_gpmc_pins {
> +		pinctrl-single,pins = <
> +
> +			/* address lines */
> +			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
> +			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
> +			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
> +
> +			/* data lines, gpmc_d0..d7 not muxable according to TRM */
> +			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
> +			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
> +			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
> +			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
> +			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
> +			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
> +			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
> +			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
> +
> +			/*
> +			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
> +			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
> +			 */
> +			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
> +			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
> +		>;
> +	};
> +};
> +
> +&gpmc {
> +	/* switch inherited setup to OneNAND */
> +
> +	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&gpmc_pins>;
> +
> +	/delete-node/ nand@0,0;
> +
> +	onenand@0,0 {
> +
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "ti,omap2-onenand";
> +		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
> +
> +		gpmc,sync-read;
> +		gpmc,sync-write;
> +		gpmc,burst-length = <16>;
> +		gpmc,burst-read;
> +		gpmc,burst-wrap;
> +		gpmc,burst-write;
> +		gpmc,device-width = <2>;
> +		gpmc,mux-add-data = <2>;
> +		gpmc,cs-on-ns = <0>;
> +		gpmc,cs-rd-off-ns = <87>;
> +		gpmc,cs-wr-off-ns = <87>;
> +		gpmc,adv-on-ns = <0>;
> +		gpmc,adv-rd-off-ns = <10>;
> +		gpmc,adv-wr-off-ns = <10>;
> +		gpmc,oe-on-ns = <15>;
> +		gpmc,oe-off-ns = <87>;
> +		gpmc,we-on-ns = <0>;
> +		gpmc,we-off-ns = <87>;
> +		gpmc,rd-cycle-ns = <112>;
> +		gpmc,wr-cycle-ns = <112>;
> +		gpmc,access-ns = <81>;
> +		gpmc,page-burst-access-ns = <15>;
> +		gpmc,bus-turnaround-ns = <0>;
> +		gpmc,cycle2cycle-delay-ns = <0>;
> +		gpmc,wait-monitoring-ns = <0>;
> +		gpmc,clk-activation-ns = <5>;
> +		gpmc,wr-data-mux-bus-ns = <30>;
> +		gpmc,wr-access-ns = <81>;
> +		gpmc,sync-clk-ps = <15000>;
> +
> +		x-loader@0 {
> +			label = "X-Loader";
> +			reg = <0 0x80000>;
> +		};
> +
> +		bootloaders@80000 {
> +			label = "U-Boot";
> +			reg = <0x80000 0x1c0000>;
> +		};
> +
> +		bootloaders_env@240000 {
> +			label = "U-Boot Env";
> +			reg = <0x240000 0x40000>;
> +		};
> +
> +		kernel@280000 {
> +			label = "Kernel";
> +			reg = <0x280000 0x600000>;
> +		};
> +
> +		filesystem@880000 {
> +			label = "File System";
> +			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
> +		};
> +
> +	};
> +};
> -- 
> 2.12.2
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html