Re: [PATCH] net: ethernet: fs-enet: Use generic CRC32 implementation

From: Krzysztof Kozlowski
Date: Tue Jul 24 2018 - 07:11:54 EST


On 24 July 2018 at 13:05, David Laight <David.Laight@xxxxxxxxxx> wrote:
> From: Krzysztof Kozlowski
>> Sent: 23 July 2018 17:20
>> Use generic kernel CRC32 implementation because it:
>> 1. Should be faster (uses lookup tables),
>
> Are you sure?
> The lookup tables are unlikely to be in the data cache and
> the 6 cache misses kill performance.
> (Not that it particularly matters when setting up multicast hash tables).

Good point, so this statement should be rather "Could be faster"... I
did not run any performance tests so this is not backed up by any
data.

I think the main benefit is rather easier code maintenance by removing
duplicated, custom code.

>> 2. Removes duplicated CRC generation code,
>> 3. Uses well-proven algorithm instead of coding it one more time.
> ...
>>
>> Not tested on hardware.
>
> Have you verified that the old and new functions give the
> same result for a few mac addresses?
> It is very easy to use the wrong bits in crc calculations
> or generate the output in the wrong bit order.

I copied the original code and new one onto a different driver and run
this in a loop for thousands of data input (although not all possible
MAC combinations). The output was the same. I agree however that real
testing would be important.

Best regards,
Krzysztof