[PATCH 2/3] ARM: dts: imx6sll-evk: correct lcd regulator GPIO pin

[Anson Huang]

On i.MX6SLL EVK board, lcd regulator is controlled
by GPIO4 IO03 using MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 pin,
NOT MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08, correct it.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
 arch/arm/boot/dts/imx6sll-evk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index cc5cf5e..41e87e6 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -74,7 +74,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_lcd>;
 		regulator-name = "lcd-pwr";
-		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
@@ -289,7 +289,7 @@
 
 	pinctrl_reg_lcd: reglcdgrp {
 		fsl,pins = <
-			MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x17059
+			MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
 		>;
 	};
 
-- 
2.7.4