Re: [linux-sunxi] Re: [PATCH 1/2] ARM: sun8i: h3: enable HDMI output on Banana Pi M2 Zero

[Icenowy Zheng]

ä 2018å7æ11æ GMT+08:00 äå11:14:19, "Jernej Åkrabec" <jernej.skrabec@xxxxxxxxx> åå:
>Dne sreda, 11. julij 2018 ob 17:05:32 CEST je Maxime Ripard napisal(a):
>> Hi,
>> 
>> On Wed, Jul 11, 2018 at 09:22:32PM +0800, Icenowy Zheng wrote:
>> > Banana Pi M2 Zero board has a miniHDMI port connected to the HDMI
>> > controller of Allwinner H3 SoC.
>> > 
>> > Enable the HDMI output in Banana Pi M2 Zero device tree.
>> > 
>> > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
>> > ---
>> > 
>> >  .../dts/sun8i-h2-plus-bananapi-m2-zero.dts    | 25
>+++++++++++++++++++
>> >  1 file changed, 25 insertions(+)
>> > 
>> > diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> > b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index
>> > 7d01f9322658..eb61dcf32797 100644
>> > --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> > +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> > @@ -26,6 +26,17 @@
>> > 
>> >  		stdout-path = "serial0:115200n8";
>> >  	
>> >  	};
>> > 
>> > +	hdmi-connector {
>> > +		compatible = "hdmi-connector";
>> > +		type = "c";
>> 
>> This is not one of the connector type declared in DRM, how is it
>> exposed to the userspace?
>
>DT binding allows it:
>
>HDMI Connector
>==============
>
>Required properties:
>- compatible: "hdmi-connector"
>- type: the HDMI connector type: "a", "b", "c", "d" or "e"
>
>but DW HDMI bridge driver hardcodes it to type A. Actually, kernel has
>defines 
>only for type A and B.

I assume it's for single link/dual link.

>
>Actually, many HDMI drivers have type A hardcoded...
>
>Best regards,
>Jernej